UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

ANNUAL REPORT PURSUANT TO SECTIONS 13 OR 15 (d) OF THE

SECURITIES AND EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2024

Commission file number: 000-56608

SS INNOVATIONS INTERNATIONAL, INC.

(Exact name of registrant as specified in its charter)

405, 3^rd  Floor, iLabs Info Technology Centre

Udyog Vihar, Phase III

Gurugram, Haryana 122016, India 

(Address of Principal Executive Offices)

Registrant’s telephone number, including area code: +91 73375 53469

Securities registered under Section 12(b) of the Act:

Securities registered under Section 12(g) of the Act:

Common Stock, $0.0001 par value

(Title of class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined by Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ☒ No ☐ 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such a shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (ss.232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ☒

Indicate by check mark whether the registrant is a large, accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large, accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act:

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

State the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was sold, or the average bid and asked prices of such common equity as of the last business day of the registrant’s most recently completed second fiscal quarter: $138,432,760.

The number of shares outstanding of the issuer’s common stock, $0.0001 par value, as of April 14, 2025, was 193,559,340 shares.

DOCUMENTS INCORPORATED BY REFERENCE: No documents are incorporated by reference into this Report except those Exhibits so incorporated as set forth in the Exhibit index.

TABLE OF CONTENTS

Unless the context otherwise requires, the terms “SSi,” “the Company,” “we,” “us,” and “our” refer to SS Innovations International, Inc., and where appropriate, our subsidiaries.

FORWARD LOOKING STATEMENTS

This Annual Report on Form 10-K (this “Annual Report”) contains certain statements that constitute forward-looking statements. Any and all statements contained in this Annual Report that are not statements of historical fact may be deemed forward-looking statements. Terms such as “may,” “might,” “would,” “should,” “could,” “project,” “estimate,” “pro-forma,” “predict,” “potential,” “strategy,” “anticipate,” “attempt,” “develop,” “plan,” “help,” “believe,” “continue,” “intend,” “expect,” “future” and terms of similar import (including the negative of any of the foregoing) may be intended to identify forward-looking statements. However, not all forward-looking statements may contain one or more of these identifying terms. Those statements appear in this Annual Report, and include statements regarding the intent, belief or current expectations of our Company and management that are subject to known and unknown risks, uncertainties and assumptions and other factors that could cause actual results and the timing of certain events to differ materially from future results expressed or implied by such forward-looking statements. Factors that could cause or contribute to such differences include, but are not limited to, those discussed in “Item 1. Business” and “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

Forward-looking statements in this Annual Report may include, without limitation, statements regarding:

These statements are not guarantees of future performance and are subject to numerous risks, uncertainties, and assumptions that are difficult to predict.

Because forward-looking statements are inherently subject to risks and uncertainties, some of which cannot be predicted or quantified, you should not rely upon forward-looking statements as predictions of future events. The events and circumstances reflected in the forward-looking statements may not be achieved or occur and actual results could differ materially from those projected in the forward-looking statements. Except as required by applicable law, including the securities laws of the United States and the rules and regulations of the SEC, we do not assume any obligation to update any forward-looking statement. We disclaim any intention or obligation to update or revise any forward-looking statement contained herein, whether as a result of new information, future events or otherwise.

TRADEMARKS, TRADE NAMES, SERVICE MARKS AND LOGOS

“SSi,” “SSi Mantra,” SSi logos and other trade names, trademarks or service marks of the Company appearing in this Annual Report are the property of SSi. Other trade names, trademarks or service marks appearing in this Annual Report are the property of their respective holders. Solely for convenience, trade names, trademarks and service marks referred to in this Annual Report appear without the ^®  , ^™   and ^SM   symbols, but those references are not intended to indicate, in any way, that we will not assert, to the fullest extent under applicable law, our rights or that the applicable owner will not assert its rights, to these trade names, trademarks and service marks.

MARKET, INDUSTRY AND OTHER DATA

Unless otherwise indicated, information contained in this Annual Report concerning our industry and the market in which we operate, including our general expectations and market position, market opportunity, and market size, is based on information from various third-party industry and research sources, on assumptions that we have made based on that data and other similar sources, and on our knowledge of the markets for our services. This information involves a number of assumptions and limitations, and you are cautioned not to give undue weight to such estimates.

In addition, industry publications, studies, and surveys generally state that they have been obtained from sources believed to be reliable, although they do not guarantee the accuracy or completeness of such information. The industry in which we operate is subject to a high degree of uncertainty and risk due to a variety of factors, including those described in “Item 1. Business” and elsewhere in this Annual Report. These and other factors could cause our actual results to differ materially from those expressed in the estimates made by the independent parties and by us.

PART I

Item 1. Business.

Company Background 

Overview

We are a commercial-stage surgical robotics company focused on transforming patient lives by democratizing access to advanced surgical robotics technologies.

We design, manufacture and market an advanced, next-generation and affordable surgical robotic system called the SSi Mantra.

While surgical robotic systems have gained acceptance globally in the past two decades for providing greater efficiency, better clinical outcomes and reducing healthcare costs, access to such systems remains largely limited to developed countries such as the United States, the European Union (the “EU’) and Japan.

With the SSi Mantra, we are breaking down barriers and accelerating access to surgical robotics technologies in underserved regions of the world.

Developed by a visionary team of surgeons, engineers and industry veterans, the SSi Mantra includes several innovative features to address shortcomings of the current generation of robotic surgery systems.

We commenced development of the SSi Mantra in 2014, received regulatory approval by the Central Drugs Standard Control Organization (“CDSCO”) India’s equivalent of the U.S. Food and Drug Administration (“FDA”), for its sale and use in India and commercially launched sales in August 2022. We also received ISO 13485 (quality management system) approval for the SSi Mantra 3. The SSi Mantra has been clinically validated for safety, efficacy and effectiveness for its intended use to perform robotically assisted surgeries in more than 80 different types of surgical procedures in India without any device related adverse events. As of December 31, 2024, we have installed 62 systems, of which 58 are located in India and 4 at overseas locations. We are currently focusing our efforts on marketing our next generation SSi Mantra 3, which was introduced in June 2024.

Our commercially installed SSi Mantra Surgical Robotic systems in India have been used to perform more than 3,500 surgical procedures, including cardiovascular, thoracic, head and neck, gynecological, urological, cancer and general surgeries. The SSi Mantra 3 has also been granted regulatory approval in Guatemala, Nepal, Ecuador and Indonesia, although our marketing efforts in those countries have been limited to date. We have filed a pre-submission application with the U.S. FDA, requesting feedback on the SSi Mantra. We had a feedback meeting with the FDA on April 2, 2024 and the FDA has indicated that we should pursue the Investigational Device Exemption (“IDE”) route to obtain U.S. approval to market. Currently, we are in the process of preparation of the IDE Application and expect to start our U.S. IDE study in third quarter of 2025, subject to FDA IDE and Institutional Review Board (“IRB”) approvals. We have also been in discussions with an EU Notified Body for the CE certification, which will allow us to market the SSi Mantra in the EU. There can be no assurance as to when we will secure such regulatory approvals, if at all. Our ISO 13485 (quality management system) approval, CDSCO approval for the manufacture, sale and distribution of our products and our Indian export license allow us to market our products in fifty non-FDA and non-EU countries without further regulatory approvals. An additional 79 countries require only minimal registration.

In our journey to make the benefits of robotically assisted surgeries available to as many people of the world as possible, we reached several milestones in 2024:

We generate revenues from the sale of the SSi Mantra Surgical Robotic System. We offer our SSi Mantra through three selling models: (i) outright purchase, where revenue is realized upfront; (ii) purchase on a deferred or installment payment basis; and (iii) purchase on a pay-per-procedure basis, where revenue is recognized over time. We also earn recurring revenue from the sales of instruments, accessories and services. We sell our products directly to customers as well as through distributors.

The SSi Mantra improves patient experience, reduces variabilities and disruption and lowers per-procedure costs. We believe that the SSi Mantra benefits patients, physicians and hospitals by providing access to an advanced and optimized robotic system. 

Corporate Information

The Company was incorporated in the state of Florida on February 4, 2015, under the name “Avra Surgical Microsystems, Inc.,” and changed its name to “Avra Medical Robotics, Inc.” on November 5, 2015.

From inception through April 13, 2023, we were engaged in developing a fully autonomous medical robotic system using proprietary software which integrated Artificial Intelligence and Deep Learning, or Machine Learning. Our research and development efforts were based in Orlando, Florida, where we established a research partnership with the University of Central Florida.

On April 14, 2023, we consummated the acquisition of CardioVentures, Inc., a Delaware corporation (“CardioVentures”), pursuant to a Merger Agreement dated November 7, 2022 (the “Merger Agreement”), by and among the Company, a wholly owned subsidiary of the Company (“Merger Sub”), CardioVentures and Dr. Sudhir Srivastava, who, through his Bahamian holding company, Sushruta Pvt. Ltd. (“Sushruta”), owned a controlling interest in CardioVentures.

CardioVentures, through a subsidiary, owned a controlling interest in Sudhir Srivastava Innovations Pvt. Ltd., an Indian private limited company (“SSI-India”), which developed and manufactures and markets the SSi Mantra, which is designed to provide an advanced, yet cost-effective surgical robotic system which make the benefits of robotic surgery available to a larger part of the global population.

Pursuant to the Merger Agreement, at Closing, Merger-Sub merged with and into CardioVentures (the “CardioVentures Merger”). In the CardioVentures Merger, holders of the outstanding shares of common stock of CardioVentures (including certain parties who provided interim convertible financing during the pendency of the Merger Agreement, were issued 135,808,884 shares of SSi common stock, representing approximately 95% of issued and outstanding shares of SSi common stock post-merger, with the existing shareholders of SSi holding approximately 6,544,344 shares of SSi common stock representing approximately 5% of issued and outstanding shares of SSi common stock post-merger.

In addition, the holder of CardioVentures common stock also received shares of newly designated Series A Non-Convertible Preferred Stock (the “Series A Preferred Shares”), which affords the holder 51% of the total voting power of the Company. As a result of the foregoing, a “Change in Control” of the Company occurred, with Dr. Sudhir Srivastava becoming the Company’s principal and controlling stockholder. The Series A Preferred Shares are automatically redeemed by the Company for nominal consideration at such time as the holder owns less than 50% of the shares issued to it in connection with the CardioVentures Merger.

Contemporaneously with the closing of the CardioVentures Merger on April 14, 2023, the Company changed its name to “SS Innovations International, Inc.,” effected a one-for-10 reverse stock split and increased its authorized common stock to 250,000,000 shares.

In connection with the consummation of the CardioVentures Merger, Dr. Sudhir Srivastava, through Sushruta, assigned all patents, trademarks and other intellectual property used in the development, commercialization, manufacturing and sale of its medical and surgical robotic systems and products to one or more wholly owned subsidiaries of SSi.

Our principal executive offices are located at 404-405, 3^rd   Floor, iLabs Info Technology Centre, Udyog Vihar, Phase III, Gurugram, Haryana 122016, India. Our telephone number is +91 73375 53469. Our corporate website is https://ssinnovations.com. Information appearing on our corporate website is not part of this Annual Report and is not incorporated by reference herein. We have included our website address as an inactive textual reference only.

Products

The SSi Mantra

The SSi Mantra Surgical Robotic System is designed to enable surgeons to perform a wide range of surgical procedures including cardiovascular, thoracic, head and neck, gynecological, urological, cancer and general surgeries. The SSi Mantra has been clinically validated for safety, efficacy and effectiveness for its intended use to perform robotically assisted surgeries in more than fifty different types of surgical procedures in India without any device related adverse events. As of the date of this Annual Report, surgeons have performed over 3,500 surgical procedures in India in a wide array of fields using the SSi Mantra, including many complex surgeries. The SSi Mantra offers the entire operating room staff three-dimensional, high definition (“3D4K”) vision, and gives the surgeon a magnified view up to ten times magnification. Our system uses specialized instrumentation, including a miniaturized surgical camera (endoscope) and wristed instruments (for example, scissors, scalpels and forceps) that are designed to help with the precise dissection and reconstruction of anatomical structures within the body. We are currently focusing our efforts on marketing our next generation SSi Mantra 3, which was introduced in June 2024.

The SSi Mantra 3 is comprised of the following components:

Surgeon Console. The SSi Mantra 3 allows surgeons to operate while comfortably seated at an ergonomic open-faced console. Surgeons use a special pair of passive 3D glasses to view a 3DHD image of the surgical field on a 32-inch 3D 4K resolution monitor with up to ten (10) times magnification, resulting in significantly enhanced vision for the surgeon. The surgeon also has a second large 23-inch 2D touch monitor for system controls and DICOM applications. The surgeon’s fingers grasp extremely precise ergonomic hand controls, with the surgeon’s hands naturally positioned relative to his or her eyes, thereby minimizing strain during the surgeon’s movements. Using electronic hardware, software, algorithms and mechanics, our technology translates the surgeon’s hand movements into precise and corresponding real-time movements of the SSi Mantra instruments positioned through surgical ports going inside of the patient. When using the SSi Mantra 3, the surgeon is able to sit in an ergonomic position and can see both the specific positioning of his or her hands and feet, thereby reducing the learning curve and maintaining comfortable ergonomics during the surgical procedure. In addition, the SSi Mantra’s robotic arms hold the camera and instruments steady, offering greater stability for surgeons and operating room staff.

Patient-Side Robotic Arm Carts. The robotic arm carts are modular in design with robotic arms mounted on individual carts, each with a maximum height of 7.2 feet. The modular design offers the flexibility of cart and robotic arm positioning to provide better placement in relation to the procedure and avoid collisions. Further, there is the option of using three, four or five robotic arm configurations based on the users’ preference and specific surgical procedures. Each robotic arm cart includes stability via parking locks, freedom of patient docking and advanced touch-screen controls. Each robotic arm cart has a built-in auto-leveling feature which allows each individual arm cart to be perfectly horizontally level with respect to uneven floor surfaces that may be present in an operating room.

Vision Cart. The vision cart provides an additional 32-inch 3D 4K resolution monitor, identical to the surgeon’s console, for the operating room staff. While wearing the 3D glasses, the entire operating team can view what the surgeon sees with the same depth perception. This ability also helps in reducing the entire team’s learning curve and translates into a safer and more efficient exchange of instruments and introduction of supplies required in surgery. The vision cart also houses the control system for the articulating endoscope and camera and pre-operative guidance software. It has uninterruptible power supply battery backup; universal safety features and incorporates the SSi Mantra multimedia recording and streaming platform.

Tele-Proctoring/Tele-Mentoring Capabilities. The SSi Mantra has a built-in live streaming platform, which provides for remote mentoring and proctoring, thereby resulting in efficient and cost-effective teaching and training capabilities.

Instruments and Accessories

We offer a comprehensive suite of stapling, energy and core instrumentation for our surgical systems, under the brand name of SSi Mudra.

Mudra Technology. The technology employed in our instruments is designed to transform the surgeon’s natural hand movements outside of the body into corresponding controlled movements inside the patient’s body, just as would be available to the surgeon in open surgery. With our technology, a surgeon can also use “motion scaling,” a feature that translates, for example, a three-centimeter hand movement outside the patient’s body into a one-centimeter instrument movement in the surgical field inside the patient’s body. Motion scaling is designed to allow precision and control for delicate tasks. In addition, the advanced software technology of the robotic system filters and eliminates any tremors that may be present in a surgeon’s hands. 

Mudra Instruments. Most of the more than 30 instruments that we manufacture incorporate Mudra technology with wristed joints for natural dexterity and tips customized for various surgical procedures. Mudra instruments are offered in an 8mm diameter. Various Mudra instrument tips include forceps, scissors, electrocautery tools, scalpels and other surgical tools that are familiar to the surgeon from open surgery and conventional minimally invasive surgery (“MIS”). We have also developed and made available a variety of cardiac surgery specific instruments. A variety of instruments may be selected and used interchangeably during surgery. All instruments are sterilizable at the hospital, and all are reusable for a defined number of procedures. A programmed memory chip inside each instrument performs several functions that help determine how the SSi Mantra and our instruments work together. In addition, the chip generally will not allow the instrument to be used for more than the prescribed number of procedures to help ensure that its performance meets specifications during each procedure.

Accessory Products. We sell various accessory products, which are used in conjunction with the SSi Mantra as surgical procedures are performed. Accessory products include sterile drapes used to help ensure a sterile field during surgery, vision products—such as replacement 3D stereo endoscopes, cannulas for the instruments and camera and special seals to prevent leakage of carbon dioxide gas used during a procedure.

Tele proctoring and Telesurgery. We are the only surgical robotic company to have received a regulatory approval from CDSCO for both tele proctoring and telesurgery. Following the demonstration of our telesurgery capabilities at the SMRSC 2024, a global conference organized by the Company, we began our clinical trials that were conducted to validate this novel approach towards remote surgery. We first conducted two animal trials at a leading laparoscopy hospital in Delhi NCR region located five kilometers away from our telesurgery lab in our facility. Thereafter, we performed a simple robotic gall bladder removal (Cholecystectomy) to demonstrate safety and efficacy of our SSi Mantra Surgical Robotic System, when utilized in a remote setting. After this trial, SSi commenced clinical trials wherein six complex urology, oncology and gynecology procedures were performed at Rajiv Gandhi Cancer Institute at a distance of approximately 35 kilometers. Most recently, we have successfully performed five robotic cardiac telesurgeries between our telesurgery lab in Gurugram and at a hospital in Jaipur located at a distance of approximately 286 kilometers, marking the world’s first accomplishment in the field of robotic cardiac surgery and in March 2025, we used the SSi Mantra 3 to perform robotic cardiac telesurgery over a 2,000-kilometer distance between SSi’s headquarters in Gurugram, and the Aster CMI Hospital in Bengaluru.

Instruments under Development

We also have a number of additional sophisticated instruments currently under development. These include:

NADI – Automated Coronary Anastomotic Connector. This instrument is a micro stapling device intended to join two arteries together in cardiac bypass procedures. We intend to offer the instrument in both robotic surgery and manual versions. The manual version is for use by cardiac surgeons who do not have a robotic system and can be utilized in an open or minimally invasive procedure.

SSi Multi-Fire Clip Applier. The SSi Multi-Fire Clip Applier is a cartridge-based clip applicator being developed to be utilized for the hemostasis of blood vessels. Use of such a device is a requirement during many surgical procedures. Currently, the clip applicators traditionally used in surgical procedures require withdrawal of the instrument after each clip is placed resulting in a time-consuming process. By providing a cartridge with multiple clips we believe the SSi Multi-Fire Clip Applier will allow for greater efficiency and time savings during surgical procedures.

SSi Robotic Stapler. We are in the process of finalizing the design and manufacturing of our SSI Robotic Stapler that would have broad applications in General Surgery, Thoracic Surgery and Oncology Surgery. Upon completion of this development, SSI would be the second company globally to have a robotic stapler that is compatible with its robotic surgical platform.

SSi Maya - XR Pre-Operative Simulator. SSi Maya is a Mixed Reality (XR) software application being crafted to transform the educational paradigm for surgeons and surgical assistants. SSi Maya is specifically being designed to train and educate users on the intricacies of the SSi Mantra Surgical Robotic System. We intend to offer immersive and innovative pre-operative training.

SSi Holographic Anatomy. This product is an advanced augmented reality tool being developed for the purpose of visualizing anatomies, providing comprehensive patient education, and offering guidance for surgical procedures. This application will potentially present patients with three-dimensional DICOM data, enabling them to better understand and engage with their own health information. 

SSi Chitrasa - Advanced DICOM Viewer. SSi Chitrasa is being designed to empower robotic surgeons with unparalleled DICOM visualization capabilities. It includes a state-of-the-art AI enabled application viewer which is seamlessly integrated with the SSi Mantra Surgical Robotic System to provide surgeons with comprehensive tools to enhance their surgical confidence and precision in the operating room. 

SSi Mixed Reality Headset. The SSi Mixed Reality headset is a medical-grade device that we hope will revolutionize intraoperative experiences by seamlessly interfacing with the SSi Mantra Surgical Robotic System. This device is being designed to offer surgeons an immersive 3D endoscopic feed visualization, while interactable augmented objects provide real-time patient vitals and data for enhanced surgical precision. The potentially seamless collaboration between these technologies creates a comprehensive surgical platform, setting a new standard for intraoperative medical advancements and pushing the boundaries of surgical excellence. Some salient features include:

SSi MantraM. In March 2025, we unveiled our Mobile Tele-Surgical Unit, the “SSi MantraM” which is designed to offer access to remote robotically-assisted surgical procedures, to geographic areas, which have only limited access to that level of healthcare.

Services

General. We have a network of field service engineers in India and maintain relationships with various distributors around the globe. This infrastructure of service and support specialists offers a full complement of services for our customers, including installation, repair, maintenance, 24/7 technical support and proactive system health monitoring.

Our comprehensive support and program assistance helps ensure customers and care teams maximize program performance and protect their investment.

Readiness and Maintenance Support. Readiness support is operational support to ensure smooth onboarding and the adoption of new systems and technology. Maintenance support helps to maximize operational efficiency and reduce unplanned equipment downtime. It includes services care plans, support teams, monitoring, software upgrades and updates, as well as a customer portal. The service care plan portfolio offers flexible service plans to ensure reliability of the systems and instruments and help optimize the robotics program. The support team of expert field service, remote technical support and customer care agents resolve and prevent any technology issues that could inhibit optimal utilization of our SSi Mantra system. Software upgrades and updates enable the latest product innovations, enhancements and reliability improvements.

Macro Healthcare Trends

Increasing demand for healthcare: The increasing demand for healthcare in emerging markets such as India is driven by population growth and a growing middle class, rising per capita incomes, growing health insurance penetration and changing lifestyles.

These trends are resulting in patients demanding specialized, higher quality products and services, with improved efficiency and outcomes for an overall better healthcare experience. India’s healthcare industry is expected to grow from $370 billion in 2022 to $610 billion in 2026. The proportion of the Indian population in the working age-group (15–59 years of age) is expected to rise from 60.7% in 2011 to 65.1% in 2036. This demographic segment demands, and we believe is willing to spend on high-quality healthcare services.

Growing adoption of technology: Patients and hospitals are increasingly focused on improving clinical outcomes while enhancing patient experience. Hospitals aim to achieve these goals by customizing care, improving provider efficiency by lowering the amount of time required to treat patients and reducing overall costs. Shorter recovery times with robotic-assisted surgery maximizes the operational efficiency of the bed capacity, along with reduction in complications.

Significant unmet need: India has 70,000 hospitals and approximately 21 million major surgeries are performed in India every year. However, only 10,000–12,000 robotic surgeries are done in India annually, representing less than 0.1% of the global volume. Furthermore, laparoscopy is well established in India, leading to a large pool of laparoscopic surgeons. This will facilitate a faster transition from laparoscopy to robotic surgery. There is a large unmet need for surgical robotic systems that are affordable, accessible and have aftermarket support.

Increasing health insurance penetration: Health insurance coverage is an important determinant of access to and demand for healthcare services. Health insurance coverage in India has steadily grown in recent years, covering 70% of the population with nearly 950 million people with either private health insurance or government subsidized schemes such as Ayushman Bharat. Currently, Indians spend approximately 20% of their health spending as an out-of-pocket expenditure compared to 55% in 2019. Key elements of the positive transformation of India’s healthcare system are the National Health Mission, Ayushman Bharat, and medical tourism.

Medical value travel: India has emerged as a leading destination for medical tourism, attracting patients from around the world. The Indian medical tourism market was valued at $2.89 billion in 2020 and is expected to reach $13.42 billion by 2026. The medical tourism sector has emerged as a key growth driver for surgical procedures in India. The factors contributing to the growth of medical tourism include availability of advanced treatments at relatively lower costs, the availability of skilled doctors, advanced technology in private hospitals, English language proficiency and ease of travel. The Indian Government has played a pivotal role in paving the way for these international patients to enter the country and avail their desired medical treatments. It has implemented a number of policies, including the introduction of an e-Medical visa, multiple entry visas and longer stays as needed for treatment.

Favorable regulatory environment: Recently, several policy measures were implemented to drive the growth of India’s healthcare sector. These include increase in public health expenditure to 2.5% of GDP by 2025; an implementation of several large-scale and ambitious initiatives like Ayushman Bharat—the world’s largest universal health coverage scheme covering 500 million people; commitment from the Government to invest $200 billion in medical infrastructure by 2024, as well as the roll out of various schemes under the Aatma Nirbhar Bharat Abhiyaan. In particular, the Performance-Linked Incentive (PLI) Scheme and the Scheme for Promotion of Medical Device Parks offers significant financial incentives for investors to manufacture in India. A new PLI 2.0 scheme is also being prepared for promotion of the in-vitro diagnostics market.

Our Strategy

Our initial strategy is to focus on underserved markets, such as India, where market penetration for surgical robotic systems has in large part been limited because of the high costs of and steep learning curve for existing systems. After validating the SSi Mantra Surgical Robotic System in these markets, which we believe we are currently accomplishing, we intend to leverage its advanced technology, significantly lower cost and ease of training to move into other markets, such as the United States and Europe. Key elements of this strategy include:

Focus on underserved markets. India, where our operations are based and where we have commercially launched the SSi Mantra, has a population of approximately 1.4 billion people and 70,000 hospitals. As a comparison, there are only approximately 6,120 hospitals in the U.S. However, only about 0.1% of global robotic surgical procedures are done in India. By offering our advanced, cost-effective SSi Mantra Surgical Robotic System, we believe that we can significantly penetrate the Indian market, as well as other underserved markets in Asia, Africa, Europe, Central and South America and elsewhere.

Focus on key institutions. Our marketing efforts are focused on large multi-specialty care hospitals where a majority of complex surgical procedures are performed. Following the initial placement at a given hospital, we intend to expand the number of physicians who use the SSi Mantra Surgical Robotic System and work with the hospitals and their surgeons to promote patient education as to the benefits and cost effectiveness of our system. We believe that these efforts will not only result in both increased usage and additional sales of instruments and systems at hospitals that purchase the system, but also increased demand from competing hospitals, surgeons and other physicians. 

Focus on Leading Surgeons to Drive Rapid and Broad Adoption. We place significant emphasis on marketing the SSi Mantra to leading surgeons who are considered to be the “thought leaders” in their institutions and fields. In this regard, we have established both an Indian Medical Advisory Board and an International Advisory Board consisting of leading surgeons in their respective fields. We believe that the participation of these surgeons in our product development and their use of the SSi Mantra will generate confidence in many other surgeons to utilize the system for all types of surgical procedures.

Continued Development and Marketing. We intend to continue developing and enhancing our technology and products and to communicate the benefits and advantages of the SSi Mantra System (lower cost, ease of training and improved patient outcomes) in India and the other markets we plan to enter.

Evaluation, Familiarization and Training Agreements with Major Medical Facilities. We have and intend to continue entering into agreements with major medical facilities to install the SSi Mantra Surgical Robotic System for evaluation, familiarization and training purposes. As of the date of this Annual Report, we had entered into such agreements with approximately four hospital networks in India and with Johns Hopkins University in Baltimore, Maryland.

National and International Medical Conferences. We participated in many International and National Conferences during 2024 hosted by nationally accredited and internationally acclaimed bodies to help both raise awareness about the SSI Mantra surgical robotic platform and provide hundreds of surgeons with the opportunity to have an insight of our SSi Mantra system. Our first Global SMRSC (SSI Mantra Robotic Surgery Conference) that was hosted in January 2024, was attended by over 700 national and international faculty who participated over the course of the two day event and our second Global SMRSC that was hosted in March 2025, was attended by over 1,200 participants and displayed the increased capabilities of the SSi Mantra 3, including the performance of telesurgery and the introduction of our mobile robotic surgical system. At both conferences, key opinion leaders from India and abroad were given the platform to discuss not only their experience with the SSi Mantra but to foster discussions on the global potential of a very disruptive yet cost-effective surgical robotic system.

Clinical Applications

The SSi Mantra has been clinically validated for safety, efficacy and effectiveness for its intended use to perform robotically assisted surgeries in more than ninety different types of surgical procedures in India without any device related adverse events. As of the date of this Annual Report, we have installed 75 systems in India and overseas, which have been used to perform more than three thousand surgical procedures, including cardiovascular, thoracic, head and neck, gynecological, urological, cancer and general surgeries. We maintain productive collaborations with leading surgeons to explore and develop new techniques and applications for robotic-assisted surgery with the SSi Mantra. We primarily focus our development efforts on those procedures in which we believe our products bring the highest patient value, surgeon value and hospital value. Representative surgical applications are described below.

Cardiovascular Surgery

Internal Mammary Artery Dissection. In a coronary artery bypass graft procedure used in cardiac surgery, a blocked coronary artery is bypassed with a graft. When available, an artery from the chest called the internal mammary artery is dissected from its natural position and grafted into place to perform the bypass. Because the internal mammary artery is located inferior to the anterior surface of the chest, dissection of the vessel is challenging using existing surgical instruments through the three- to five-inch incision commonly used in a non-robotic coronary artery bypass graft procedure. Our products have multiple joints that emulate the surgeon’s shoulders and elbows, allowing exact positioning of the instruments inside the patient’s chest. In addition, our Mudra instrument joints are designed to permit the surgeon to reach behind the tissues for easier dissection of the internal mammary artery. Thus, we believe that the internal mammary artery can be dissected with greater ease and precision using the SSi Mantra Surgical Robotic System.

Totally Endoscopic Coronary Artery Bypass Surgery (TECAB). Coronary artery bypass graft surgery demands that the surgeon delicately dissect and precisely suture very small structures, which are less than two millimeters in diameter, under significant magnification. These procedures are difficult when performed in open surgery. They are even more difficult when performed using a limited incision approach and can be challenging to perform when the heart is beating. As a result, this procedure is typically done as open surgery by stopping the heart and using a heart/lung bypass machine. The technology employed by the SSi Mantra is designed to allow surgeons to perform scaled instrument movements that can be even more precise than the movements used in open surgery, thus enabling precise suturing of single and multiple coronary vessels on a stopped or beating heart.

Mitral and Aortic Valve Repair/Replacement. Valve repair and replacement surgeries are challenging even when using open surgical techniques. Significant exposure of the surgical field is essential to the identification and precise manipulation of valves and other structures inside the heart and is key to successful surgical outcomes with minimal complications. Motion scaling allows a surgeon using the SSi Mantra to maneuver instruments inside the patient even more precisely than is possible in open surgery. The SSi Mantra has enabled heart valve repairs to be performed through small ports in a manner that could not have been accomplished with open surgery.

Thoracic Surgery

Conventional approaches to surgical procedures in the thorax include both open and video-assisted thoracoscopic approaches. Procedures performed via these methods include pulmonary wedge resection, pulmonary lobectomy, thymectomy, mediastinal mass excision and esophagectomy.

Head and Neck Surgery

Transoral Surgery. Head and neck cancers are typically treated by either surgical resection or chemo-radiation, or a combination of both. Surgical resection performed by an open approach may require a “jaw-splitting” mandibulotomy. This procedure, while effective in treating cancer, is potentially traumatic and disfiguring to the patient. Less invasive approaches via the mouth (transoral surgery) are challenged by line-of-sight limitations dictated by conventional endoscopic tools. Chemo-radiation as a primary therapy does allow patients to avoid traumatic surgical incisions; however, the literature suggests that this modality diminishes patients’ ability to speak and swallow normally. Robotically assisted transoral surgery allows them to operate on tumors occurring in the oropharynx (i.e., tonsil and base of tongue) and larynx via the mouth and to overcome some of the line-of-sight limitations of conventional transoral surgery.

Gynecologic Surgery

Hysterectomy. Removal of the uterus is one of the most performed surgeries in gynecology and is performed for a variety of underlying benign and cancerous conditions. Hysterectomies can be performed using open surgery or minimally invasive techniques, which include vaginal, laparoscopic, and robotic-assisted approaches. We believe that robotic-assisted surgery with the SSi Mantra provides patients with the opportunity to receive a minimally invasive treatment as an alternative to an open hysterectomy.

Sacro colpopexy. The abdominal (open) Sacro colpopexy is one of the operations performed to treat vaginal vault prolapse. Sacro colpopexy involves suturing a synthetic mesh that connects and supports the vagina to the sacrum (tailbone). A Sacro colpopexy can be performed using a conventional laparoscopic technique; however, it is often difficult and cumbersome to perform. Robotic assisted surgical capabilities enable a larger number of these procedures to be performed through a minimally invasive technique, conferring the benefits of minimally invasive surgery to a broader range of Sacro colpopexy patients.

Urologic Surgery

Prostatectomy. Radical prostatectomy is the removal of the prostate gland and accompanying lymph nodes in patients diagnosed with clinically localized prostate cancer. The standard approach to the removal of the prostate was via an open surgical procedure. The conventional laparoscopic approach is an option, but it is difficult and poses challenges to even the most skilled urologist. The SSi Mantra will enable a larger number of surgeons to convert from using an open surgical technique to a minimally invasive robotic surgical technique.

Partial Nephrectomy. Partial nephrectomy is the removal of a small portion of a kidney (typically, an area of the kidney containing a tumor). Partial nephrectomies are most commonly performed in patients diagnosed with clinically localized renal cancer. Excluding robotic-assisted surgery, there are three common surgical approaches to performing partial nephrectomies: open surgical technique, laparoscopy, and hand-assisted laparoscopy, which is a hybrid of open surgery and laparoscopic techniques. Robotic assisted surgical capabilities may enable a large number of these procedures to be performed through a minimally invasive technique, conferring the benefits of minimally invasive surgery to a broader range of partial nephrectomy patients.

Radical Nephrectomy. Radical nephrectomy is a surgery to remove the entire kidney, typically done to treat kidney cancers and occasionally or other reasons. In some instances, the adrenal gland and lymph nodes may be removed as well.

Cystectomy. Robotic-assisted cystectomy is a minimally invasive bladder surgery with the same cancer removal success as open surgery. During robotic cystectomy, robotically trained urology surgeons remove the bladder and redirect the urinary tract using a surgical robot. A robotic cystectomy is performed through a series of small keyhole-sized incisions across the abdomen, which is less painful, heals faster, and produces significantly less surface scarring than the larger incision associated with open surgery.

General Surgery

Hernia Repair. A hernia occurs when an organ or other tissue squeezes through a weak spot in a surrounding muscle or connective tissue. During hernia repair surgery, the weakened tissue is secured, and defects are repaired. Common types of hernias are ventral and inguinal. Ventral, or abdominal hernia, may occur through a scar after surgery in the abdomen. Inguinal hernia is a bulge in the groin and is more common in men.

Colorectal Surgery. These procedures typically involve benign or cancerous conditions of the lower digestive system, in particular the rectum or colon. Common procedures in this area include hemicolectomy, sigmoidoscopy, low anterior resection and abdominoperineal resection.

Cholecystectomy. Cholecystectomy, or the surgical removal of the gall bladder, is a commonly performed general surgery procedure. Cholecystectomy is the primary method for the treatment of gallstones and other gall bladder diseases. Most cholecystectomies are performed using multi-port MIS techniques, although some surgeons choose to perform cholecystectomies using manual single-port instrumentation.

The Global Robotic Surgery Market

General

The global surgical robotics market valued at 9.6 billion in 2023 is forecasted to grow at a robust CAGR of 16.5% reaching US$23.7 billion by 2029*. Surgical robots offer significant advantages in minimally invasive surgery by enabling exceptionally precise manipulation of surgical instruments within constrained operation spaces, surpassing human capabilities. Robotic surgery is a procedure which involves a minimally invasive spectrum and represents an evolution in practice across numerous medical disciplines. Surgical robotics technology is used across various medical specialties, enabling surgeons to perform complex procedures through small incisions, resulting in reduced patient trauma, shorter recovery times, and enhanced patient outcomes. Surgeries conducted utilizing robotic systems are expected to grow by approximately 400%, from 1.6 million surgeries in 2020 to 6.2 million surgeries by 2030.

Market Dynamics

Increase in demand and acceptance of laparoscopic or minimally invasive surgery (“MIS”) due to the benefits to patients and surgeons, such as better screening, greater precision, shorter hospitalization, reduced pain and discomfort has fueled the growth in the global surgical robotics market. In addition, the surge in the number of gynecological, neurological and urological diseases is a primary factor driving the surgical robotics market growth.

In addition, surgical robotics enable minimally invasive procedures, which involve smaller incisions, reduced trauma to surrounding tissues, and quicker recovery times. Patients are increasingly seeking procedures that result in less pain and shorter hospital stays, and surgical robots fulfill these demands and the rise in adoption of minimally invasive procedures has fueled market growth.

Many surgical robotic systems incorporate advanced visualization technologies, such as high-definition 3D imaging and augmented reality. These technologies grant surgeons a clearer view of the surgical site, enhancing their ability to visualize complex anatomical structures and perform intricate tasks. The growth of the surgical robotics market is expected to be driven by the availability of improved healthcare infrastructure, increase in unmet healthcare needs, rise in prevalence of chronic diseases, and surge in demand for advanced surgical robotics products.

Furthermore, the increase in need for automation in the healthcare industry and the shifting trend towards advanced robotic surgeries fuels market growth. Moreover, untapped economies such as Brazil, India, China and other developing economies create a lucrative surgical robotics market opportunity.

The demand for surgical robotics is not only limited to developed countries such as the U.S. but is also being witnessed in the developing countries, such as China, and India, which fuel the growth of the market. Factors such as the rise in the number of surgeries drive the adoption of robotic technologies across different specialties, contributing to the robust growth of the surgical robotics market. For instance, according to the National Center for Biotechnology and Information (NCBI), in 2022, around 1,918,030 new cancer cases are projected to occur in the United States. In light of this projection, the number of cancer surgeries performed by the subspecialty of robotic oncology surgeons is also expected to increase drastically as well.

Furthermore, as the global population ages, we expect that there will be a greater need for surgical interventions to address age-related health conditions which boosts market growth. Surgical robots assist surgeons in handling the complexities of these procedures, allowing for safer and more effective outcomes in elderly patients. Moreover, initially limited to specific procedures, robotic technologies are now being adapted for a broader spectrum of surgeries across various medical fields, including cardiac, neurology, urology, gynecology, and more. This versatility attracts hospitals and clinics to aim to offer comprehensive robotic surgical services which is expected to drive the market growth.

High initial costs associated with acquiring and implementing robotic systems, including infrastructure and training, pose a financial challenge for many healthcare facilities which may impede market growth. Regulatory complexities and concerns regarding patient safety, as well as the need for rigorous clinical validation of robotic procedures, slow down the adoption process. In addition, the intricate nature of surgical robotics necessitates specialized training for surgeons, potentially leading to a shortage of skilled professionals. These factors collectively hinder the rapid expansion of the surgical robotics market.

Segmental Overview

The surgical robotics industry is segmented into components, surgery type, and region. By component, the market is categorized into systems, accessories, and services. Based on surgery type, the market is segregated into gynecology surgery, urology surgery, neurosurgery, orthopedic surgery, general surgery, and other surgeries. Region wise, the market is analyzed across North America, Europe, Asia-Pacific, Latin America, the Middle East and Africa (“LAMEA”).

By Component

With a consistently expanding installed base of surgical robotic systems globally and increasing utilization thereof, the accessories and services segment dominated the global surgical robotics market in 2022 and is expected to remain dominant throughout the forecast period, due to a further rise in the number of surgical robotics procedures performed with precision, accuracy, and improved patient outcomes, coupled with the increased adoption of surgical robotics technology. However, the systems segment is expected to register the highest CAGR during the forecast period, owing to a rise in technological advancements and an increase in demand for advanced robotic surgical systems. 

By Surgery Type

The general surgery segment dominated the global surgical robotics market share in 2024 and is anticipated to continue this trend during the forecast period. This is attributed to versatility and effectiveness of surgical robotics in a wide range of general surgery procedures, increase in patient demand for minimally invasive surgeries, and ongoing advancements in technology.

By Region

The surgical robotics market size is analyzed across North America, Europe, Asia-Pacific, and LAMEA. North America accounted for a major share of the surgical robotics industry in 2024 in terms of the number of surgical robotic systems installed and is expected to maintain its dominance during the forecast period. In addition, the presence of well-established healthcare infrastructure, high purchasing power, and rise in adoption rate of advanced surgical robotics products are expected to drive the market growth. Furthermore, product launch, collaborations, and acquisitions adopted by the key players in this region boost the growth of the market.

Asia-Pacific is expected to grow at the highest rate during the surgical robotics market forecast period. The market growth in this region is attributable to the growing industrial infrastructure, the rise in prevalence of chronic diseases, such as cancer and cardiovascular conditions which has driven the need for sophisticated surgical interventions, which surgical robotic systems can provide. Moreover, the increase in awareness and acceptance of minimally invasive procedures among patients in the Asia-Pacific region along with the benefits offered by surgical robotics further propels the market growth in this region.

India

Within the Asia-Pacific region, India, being the fastest growing economy, rising incomes and significant unmet need for high-quality healthcare services is potentially a key driver for the growth of surgical robotics in the country. While India’s healthcare sector is poised to grow from $110 billion in 2016 to $610 billion in 2026, its healthcare spending as a percentage of GDP is expected to grow from 3% to 6% and the ratio of insured households is expected to grow from 37% to 69% between 2023 and 2030. Similarly, India’s ratio of out-of-pocket healthcare spending is also expected to decline from 55% in 2023 to 36% in 2030, as the result of increased insurance penetration.

Historically, the lack of investment in healthcare infrastructure in India, has led it to lag World Health Organization (“WHO”) standards in terms of the number of hospital beds and physicians per 1,000 population. In the last several years, with the increasing burden of lifestyle diseases and additional factors such as increasing medical value travel, a systemic shift has occurred in India with a renewed focus on increasing healthcare spending. This trend is reflected in a 19.7% increase in hospital industry revenue from 2020 to 2023 and a 34.8% increase in hospital industry EBIDTA during the same period.

Sales, Marketing and Customer Support

Sales Model

We provide our products through a direct sales organization in India and, outside of India, through an expanding distributor network that, as of December 31, 2024, included distributors in Colombia, Ecuador, Guatemala, Indonesia, the Philippines, the United Arab Emirates, CIS Countries, the Baltic Region, Greece, Cyprus, Sri Lanka, Bangladesh, Nepal, Oman, and Australia.

Our direct sales organization is composed of a capital sales team of ten individuals, who are responsible for selling systems, and a clinical support team of thirty individuals, which is responsible for supporting the systems used in procedures performed at our hospital accounts. Our hospital accounts include both individual hospitals and healthcare facilities as well as hospitals and healthcare facilities that are part of an integrated chain. The initial system sale into an account is a major capital equipment purchase by our customers and typically has a lengthy sales cycle that can be affected by evaluation periods, macroeconomic factors, capital spending prioritization, the timing of budgeting cycles and competitive bidding processes. Capital sales activities include educating surgeons, physicians and other hospital staff across multiple specialties on the benefits of robotic-assisted surgery with the SSi Mantra, total treatment costs and the clinical applications that our technology enables. We also train our sales organization to educate hospital management on the potential benefits of adopting our system, including the clinical benefits of robotic-assisted surgery with the SSi Mantra, such as improved patient outcomes.

Our clinical sales team works onsite at hospitals, interacting with surgeons and physicians, operating room staff and hospital administrators to develop and sustain successful robotic-assisted surgery. They assist the hospital in identifying surgeons or physicians who have an interest in robotic-assisted surgery and the potential benefits provided by the SSi Mantra. Our clinical sales team provides current clinical information on robotic-assisted surgery and new product applications to the hospital teams. 

We offer our SSi Mantra through three selling models— outright purchase, purchase on a deferred or installment payment basis, and purchase on a pay per procedure basis.

In cases where the systems are installed on pay per procedure basis, the Company earns revenue share which is a mix of fixed and variable components. Variable components consist of revenue share which is agreed based on the number and type of procedures performed by the customer, while the fixed component involves an agreed amount which the customer is obliged to pay over the lease term. Accordingly, the fixed component is recognized on a straight-line basis as lease income. Since title for the system is not getting transferred to the customer, the cost relating to those systems is capitalized under property, plant and equipment and accordingly depreciation is charged over its period of useful life.

Our customers place orders to replenish their supplies of instruments and accessories on a regular basis. New direct customers who purchase a system typically place an initial stocking order of instruments and accessories soon after they receive their system.

To date, substantially all of our sales have been in India, with one sale each in the United Arab Emirates, Ecuador, Nepal and Indonesia. 

Training and Customer Support

We also provide training for surgeons, physicians and staff on the operation and use of the SSi Mantra using a variety of training approaches. These include didactic modules training, hands on training, dry runs with the surgeons and their entire team, in-person proctored initial cases, on-site support for additional cases and remote proctoring support for complex cases. With respect to sale of surgical robotic systems, training is provided at the time of delivery to the end customer, however the effort involved is considered negligible.

We have a network of field service and technical support engineers in India and are establishing relationships with various distributors around the globe where we intend to market and sell the SSi Mantra. This infrastructure of service and support specialists, along with advanced service tools and solutions, offers a full complement of services for our customers, including installation, repair, maintenance, 24/7 technical support and proactive system health monitoring.

Research and Development

We focus our research and development efforts on enhancing and improving our products and services with a view to fulfilling our vision that the benefits of advanced robotic surgery should be cost-effective and available to everyone. Through ingenuity and intelligent technology, we believe that we can expand the potential of physicians to heal without constraints due to both cost and accessibility of these technologies. We employ engineering and research and development staff and currently have a research and development team of 65 employees to focus on delivering future innovations and sustaining improvements that advance our mission.

Manufacturing

Our systems and instruments are manufactured by our employees at our approximately 70,000 square-feet facility in Gurugram, Delhi NCR, India. The manufacturing of our products is a complex operation involving a number of separate processes and components.

We purchase both custom and off-the-shelf components from a large number of suppliers from both within India and overseas and subject them to stringent quality specifications, inspections, and processes. Some of the components necessary for the assembly of our products are currently provided to us by sole-sourced suppliers (the only recognized supply source available to us) or single-sourced suppliers (the only approved supply source for us among other sources). We believe, however, that alternative suppliers are available if it should become necessary, although no assurance can be given that we could secure such alternative sources of supply, if required, on commercially reasonable terms or without undue operational disruption.

We purchase the majority of our components and major assemblies through purchase orders rather than long-term supply agreements and generally do not maintain large volumes of finished goods relative to our anticipated demand.

Subject to receipt of necessary financing, we plan to expand our in-house manufacturing capacity in order to meet anticipated increases in demand and to reduce our reliance on third-party suppliers.

Competition

We face competition in the forms of existing open surgery, conventional MIS, drug therapies, radiation treatment and other emerging diagnostic and interventional surgical approaches. Our success depends on continued clinical and technical innovation, quality and reliability, as well as educating hospitals, surgeons and patients on the demonstrated results associated with robotic-assisted medical procedures using our SSi Mantra Surgical Robotic System and its efficacy and cost-effectiveness relative to other techniques.

We compete with a number of U.S. and foreign companies that have developed and currently manufacture and market products in the field of robotic-assisted medical procedures, including but not limited to: Intuitive Surgical, Inc.; Asensus Surgical, Inc.; avateramedical GmbH; CMR Surgical Ltd.; Johnson & Johnson; Medicaroid Corporation; Medrobotics Corporation; Medtronic plc; meerecompany Inc.; Olympus Corporation; Samsung Electronics Co., Ltd; Shandong Weigao Group Medical Polymer Company Ltd.; Shanghai Microport Medbot (Group) Co., Ltd.; and Titan Medical Inc. Most, if not all of these companies have longer operating histories and greater financial resources than SSi. In addition, other companies with substantial experience in industrial robotics could potentially expand into the field of medical robotics and become competitors.

Our failure to compete effectively with these existing and potential competitors could adversely affect our results of operations, business and prospects.

Intellectual Property

We place considerable importance on obtaining and maintaining patent, copyright, and trademark protection for our technologies, products and processes.

We generally rely upon a combination of intellectual property laws, confidentiality procedures and contractual provisions to protect our proprietary technology. For example, we have patents and trademarks, both registered and unregistered, that provide distinctive identification of our products in the marketplace.

As of the date of this Annual Report, our intellectual property portfolio consists of 5 granted utility patents and 65 pending utility patent applications, and 10 PCT international WIPO applications as follows:

Further, our intellectual property portfolio also consists of 10 PCT international WIPO applications as follows:

Further, our intellectual property portfolio also consists of 30 granted design patents and 4 pending design patent application as follows:

In addition, we have filed 93 applications for trademark registrations in India of which 40 have been registered. Further, we have filed 31 applications for trademark registrations through both Madrid and direct foreign filings of which 13 have been registered.

We have also filed two copyright applications, both of which have been granted.

We intend to apply for additional utility patents, designs and trademarks in various jurisdictions.

Notwithstanding the foregoing, we cannot be certain as to the scope of protection that the patents granted will afford our technology and products, nor can we be certain that any pending or future patent applications will be granted. Furthermore, if any protection we obtain is reduced or eliminated, others could use our intellectual property without compensating us, resulting in harm to our business. In addition, others may assert that our products infringe on their intellectual property rights, which may cause us to engage in costly disputes and, if we are not successful in defending ourselves, could also cause us to pay substantial damages and prohibit us from selling our products.

None of our patents and patent applications are licensed to or from third parties. 

Government Regulation

General

Our products and operations are subject to regulation in India by the Central Drugs Standard Control Organization (the “CDSCO”), by the Food and Drug Administration (the “FDA”) in the U.S. and by similar agencies in other countries and regions in which we market or plan to market our products. In addition, our products must meet the requirements of a large and growing body of international standards, which govern the design, manufacture, materials content and sourcing, testing, certification, packaging, installation, use and disposal of our products. We must continually keep abreast of these regulations, standards and requirements and integrate our compliance into the development and regulatory documentation for our products. Failure to meet these standards could limit our ability to market our products in those regions that require compliance with such standards. Examples of standards to which we are subject include ISO 13485, an internationally recognized quality management system for the design, development and manufacture of medical devices.

ISO 13485 Quality Management System

ISO 13485 is an internationally recognized quality management system for the design, development and manufacture of medical devices. It sets out the requirements for a quality management system specific to the medical device industry. This standard is designed to be used by manufacturers throughout the life cycle of a medical device. We are required to meet this standard to register our products for sale globally and are subject to rigorous annual reassessment and audit procedures.

Our Company has developed a Harmonized ISO 13485 QMS system in line with EN ISO 13485 and 21 CFR 820, for compliance with U.S. and European Union (“EU”) quality management systems requirements.

We received ISO 13485 certifications in 2021. During the course of 2024, we conducted recertification audit from EU Notified Body for EN ISO 13485 and ISO 13485 and we received the certification in Q4 of 2024.

India Regulation

Medical devices in India had been mostly unregulated for a long time but that has changed in recent years, with the adoption of rules and regulations designed to improve and enhance patient safety. Our products are primarily regulated under the Indian Medical Device Rules, 2017, as amended by the Medical Device (Amendment) Rules, 2020 (as amended, the “IMDR”) promulgated and administered by the CDSCO. These rules cover various aspects of medical device related regulations, including classification, registration, manufacturing and import, labeling, sales, and post-market requirements. Similar to rules in the EU, they mandate that devices are safe and perform their intended function.

Based on intended use of the device, the risks associated with the device and other parameters referred to in the IMDR, the Central Licensing Authority of India classifies Medical Devices into four risk classes: A (low risk); B (low moderate risk); C (moderate high risk); and D (high risk).

The CDSCO has further divided the device classifications into 24 panels, where our surgical robotic system is classified as a Class B device pertaining to operating room procedures. This license has been updated to Class C to be in line with the international classification System.

We currently have CDSCO approval for the manufacture, sale and distribution of our products under Class C including the Telesurgery approvals and a license to export our products from India.

In December 2024 we became the first and only company in India to receive CDSCO regulatory approval for telesurgery and tele proctoring capabilities of a surgical robotic system.

U.S. Regulation

Our products will be subject to regulation as medical devices in the United States under the Federal Food, Drug, and Cosmetic Act (“FFDCA”), as implemented and enforced by the FDA. The FDA regulates the development, design, non-clinical and clinical research, manufacturing, safety, efficacy, labeling, packaging, storage, installation, recordkeeping, complaint and adverse event reporting, clearance, approval, certification, promotion, marketing, export, import, distribution and service of medical devices in the U.S. to ensure that medical devices distributed domestically are safe and effective for their intended uses.

We have filed a pre-submission application with the U.S. FDA, requesting feedback on the SSi Mantra. We had a feedback meeting with the FDA on April 2, 2024, and the FDA has indicated that we should pursue the Investigational Device Exemption (“IDE”) route to obtain U.S. approval to market. Currently, we are in the process of preparation of the IDE Application and expect to start our U.S. IDE study in third quarter of 2025, subject to FDA IDE and Institutional Review Board (“IRB”) approvals There can be no assurance that we will receive FDA approval to market the SSi Mantra through the IDE route, that we will need to undertake a different path as set forth below or that we will ever receive FDA approval to market.

Under the FDA’s regulatory scheme, medical devices are classified into one of three classes—Class I, Class II or Class III, depending on the degree of risk associated with each medical device and the extent of control needed to ensure safety and effectiveness. We believe that our current SSi Mantra Surgical Robotic System and other products will be classified as Class II medical devices.

Class II medical devices are those that are subject to general controls, and most require premarket demonstration of adherence to certain performance standards, as specified by the FDA, and special controls as deemed necessary by the FDA to ensure the safety and effectiveness of the device. These special controls can include performance standards, post-market surveillance, patient registries and FDA guidance documents.

Manufacturers of most Class II devices are required to submit to the FDA a premarket notification under Section 510(k) of the FFDCA requesting authorization to commercially distribute the device. The FDA’s authorization to commercially distribute a device subject to a 510(k) premarket notification is generally known as 510(k) clearance. Our current products are expected to be subject to premarket notification and clearance under section 510(k) of the FFDCA. To obtain 510(k) clearance, we must submit to the FDA a premarket notification submission demonstrating that the proposed device is “substantially equivalent” to a legally marketed predicate device.

The FDA may require additional information, including clinical data, to make a determination regarding substantial equivalence. In addition, the FDA collects user fees for certain medical device submissions and annual fees for medical device establishments.

If the FDA agrees that the device is substantially equivalent to a predicate device, it will grant clearance to commercially market the device in the U.S. The FDA has a statutory ninety-day (90-day) period to respond to a 510(k) submission; however, as a practical matter, clearance often takes longer. The FDA may require further information, including clinical data, to make a determination regarding substantial equivalence. If the FDA determines that the device, or its intended use, is not “substantially equivalent” to a predicate device, the device may be designated as a Class III device. The device sponsor must proceed with and fulfill the requirements of the more rigorous requirements of the premarket approval (“PMA”) process or can request a risk-based classification determination for the device in accordance with the de novo classification pathway, which is a route to market for novel medical devices that are low to moderate risk and are not substantially equivalent to a predicate device.

The PMA process is more demanding than the 510(k) premarket notification process. In a PMA application, the manufacturer must demonstrate that the device is safe and effective, and the PMA application must be supported by extensive data, including data from preclinical studies and human clinical trials. The FDA, by statute and regulation, has 180 days to review a PMA application, although the review more often occurs over a significantly longer period of time and can take up to several years. In approving a PMA application or clearing a 510(k) submission, the FDA may also require some additional manufacturing controls, design control activities and approvals, as well as specific post-market surveillance requirements when necessary to protect the public health or to provide additional safety and effectiveness data for the device. In such cases, the manufacturer might be required to follow certain patient groups for a number of years and make periodic reports to the FDA on the clinical status of those patients. 

Clinical trials are almost always required to support a PMA and are sometimes required to support a 510(k) submission. All clinical investigations designed to determine the safety and effectiveness of a medical device must be conducted in accordance with the FDA’s investigational device exemption (“IDE”) regulations, which govern investigational device labeling, prohibit the promotion of the investigational device and specify an array of recordkeeping, reporting and monitoring responsibilities of study sponsors and study investigators. Regardless of the degree of risk presented by the medical device, clinical studies must be approved by, and conducted under the oversight of, an Institutional Review Board (“IRB”) for each clinical site. During a study, the sponsor is required to comply with the applicable FDA requirements, including, for example, trial monitoring, selecting clinical investigators and providing them with the investigational plan, ensuring IRB review, adverse event reporting, record keeping and prohibitions on the promotion of investigation devices or on making safety or effectiveness claims for them. The clinical investigators in the clinical study are also subject to the FDA’s regulations and must obtain patient informed consent, rigorously follow the investigational plan and study protocol, control the disposition of the investigational device and comply with all reporting and recordkeeping requirements. Additionally, after a trial begins, we, the FDA, or the IRB could suspend or terminate a clinical trial at any time for various reasons, including a belief that the risks to studying subjects outweigh the anticipated benefits.

After a device receives 510(k) clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change or modification in its intended use, will require a new 510(k) clearance or depending on the modification, PMA approval or de novo classification. The FDA requires each manufacturer to determine whether the proposed change requires submission of a 510(k), de novo classification or a PMA in the first instance, but the FDA can review any such decision and disagree with the manufacturer’s determination. If the FDA disagrees with a manufacturer’s determination, the FDA can require the manufacturer to cease marketing and/or request the recall of the modified device until 510(k) marketing clearance, approval of a PMA or issuance of a de novo classification. Also, in these circumstances, the manufacturer may be subject to significant regulatory fines or penalties.

In addition, the FDA may place significant limitations upon the intended use of our products as a condition of granting marketing authorization. Moreover, after a device is placed on the market, numerous FDA and other regulatory requirements continue to apply. These requirements include establishment registration and device listing with the FDA; compliance with medical device reporting regulations, which require that manufacturers report to the FDA if their device caused or contributed, or may have caused or contributed, to a death or serious injury or malfunctioned in a way that would likely cause or contribute to a death or serious injury if it were to recur; compliance with corrections and removal reporting regulations, which require that manufacturers report to the FDA field corrections and product recalls or removals if undertaken to reduce a risk to health posed by the device or to remedy a violation of the FFDCA that may present a risk to health; the FDA’s recall authority, whereby the agency can order device manufacturers to recall from the market a product that is in violation of governing laws and regulations; and post-market surveillance activities and regulations, which apply when deemed by the FDA to be necessary to protect the public health or to provide additional safety and effectiveness data for the device. In addition, the FDA and the Federal Trade Commission also regulate the advertising and promotion of our products to ensure that the claims we make are consistent with our regulatory clearances, that there is scientific data to substantiate the claims and that our advertising is neither false nor misleading. In general, we may not promote or advertise our products for uses not within the scope of our intended use statement in our clearances or make unsupported safety and effectiveness claims.

In the U.S., our manufacturing processes will be required to comply with the Quality System Regulation (“QSR”). The QSR covers, among other things, the methods used in, and the facilities and controls used for, the design, testing, controlling, documenting, manufacture, packaging, labeling, storage, installation and servicing of all medical devices intended for human use. The QSR also requires maintenance of extensive records, which demonstrate compliance with the FDA regulations, the manufacturer’s own procedures, specifications and testing, as well as distribution and post-market experience. Compliance with the QSR is necessary for a manufacturer to be able to continue to market cleared or approved product offerings in the U.S. A company’s facilities, records and manufacturing processes are subject to periodically scheduled or unscheduled inspections by the FDA. Failure to maintain compliance with applicable QSR requirements could result in the shut-down of, or restrictions on, manufacturing operations and the recall or seizure of marketed products. If the FDA determines that a manufacturer has failed to comply with applicable regulatory requirements, it can take a variety of compliance or enforcement actions, which may result in any of the following sanctions:

In addition, the discovery of previously unknown problems with any marketed products, including unanticipated adverse events or adverse events of increasing severity or frequency, whether resulting from the use of the device within the scope of its clearance or off-label by a physician in the practice of medicine, could result in restrictions on the device, including the removal of the product from the market or voluntary or mandatory device recalls.

Products manufactured outside of the U.S. by or for us are subject to U.S. Customs and FDA inspection upon entry into the U.S. We must demonstrate compliance of such products with U.S. regulations and carefully document the eventual distribution or re-exportation of such products. Failure to comply with all applicable regulations could prevent us from having access to products or components critical to the manufacture of finished products and lead to shortages and delays.

European Union Regulation

In the European Union (the “EU”), all medical devices placed on the EU market must meet the essential requirements (“Essential Requirements”), including the requirement that a medical device must be designed and manufactured in such a way that it will not compromise the clinical condition or safety of patients or the safety and health of users and others. In addition, the device must achieve the performance intended by the manufacturer and be designed, manufactured and packaged in a suitable manner.

All medical devices are currently regulated by Regulation (EU) No 2017/745 (the “EU Medical Devices Regulation” or the “MDR”), which became effective on May 26, 2021 and replaced the former regulatory framework set forth in Council Directive 93/42/EEC (the “MDD”).

We have been in discussions with an EU Notified body for CE certification, which will allow us to market the SSi Mantra in the EU. We expect to submit our CE application submission in the second quarter of 2025. There can be no assurance that we will receive CE certification.

The MDR was adopted with the aim of ensuring better protection of public health and patient safety. The MDR establishes a uniform, transparent, predictable and sustainable regulatory framework across the EU for medical devices and ensures a high level of safety and health while supporting innovation. Unlike directives, regulations are directly applicable in EU member states without the need for member states to implement them into national law. This aims to increase harmonization across the EU member states.

The MDR requires that, before placing a device on the market, other than a custom-made device, manufacturers (as well as other economic operators, such as authorized representatives and importers) must register by submitting identification information to the EUDAMED electronic system, which is in the process of being implemented. The information to be submitted by manufacturers (and authorized representatives) also includes the name, address and contact details of the person or persons responsible for regulatory compliance. The MDR also requires that, before placing a device on the market, other than a custom-made device, manufacturers must assign a unique identifier to the device and provide it along with other core data to the unique device identifier (“UDI”) database.

All manufacturers placing medical devices on the market in the EU must comply with the EU medical device vigilance system. Under this system, serious incidents and Field Safety Corrective Actions (“FSCAs”) must be reported to the relevant authorities of EU member states. These reports are to be submitted through EUDAMED (once fully functional) and aim to ensure that, in addition to reporting to the relevant authorities of the EU member states, other actors, such as the economic operators in the supply chain, will also be informed. Until EUDAMED is fully functional, the corresponding provisions of the MDD continue to apply. Manufacturers are required to take FSCAs, which are defined as any corrective action for technical or medical reasons to prevent or reduce the risk of a serious incident associated with the use of a medical device that is made available on the market.

The advertising and promotion of medical devices is subject to some general principles set forth in EU legislation. According to the MDR, only devices that are CE (Conformité Européene) marked may be marketed and advertised in the EU in accordance with their intended purpose. Directive 2006/114/EC concerning misleading and comparative advertising and Directive 2005/29/EC on unfair commercial practices, while not specific to the advertising of medical devices, also apply to the advertising thereof and contain general rules, such as, for example, requiring that advertisements are evidenced, balanced and not misleading. Specific requirements are defined at a national level. EU member states’ laws related to the advertising and promotion of medical devices, which vary between jurisdictions, may limit or restrict the advertising and promotion of products to the general public and may impose limitations on promotional activities with healthcare professionals.

Many EU member states have adopted specific anti-gift statutes that further limit commercial practices for medical devices, in particular vis-à-vis healthcare professionals and organizations. Additionally, there has been a recent trend of increased regulation of payments and transfers of value provided to healthcare professionals or entities and many EU member states have adopted national “Sunshine Acts,” which impose reporting and transparency requirements (often on an annual basis), similar to the requirements in the United States, on medical device manufacturers. Certain EU member states also mandate implementation of commercial compliance programs.

In the EU, regulatory authorities have the power to carry out announced and, if necessary, unannounced inspections of companies, as well as of suppliers and/or sub-contractors and, where necessary, the facilities of professional users. Failure to comply with the applicable regulatory requirements could require time and resources to respond to the regulatory authorities’ observations and to implement corrective and preventive actions, as appropriate. Regulatory authorities have broad compliance and enforcement powers and, if such issues cannot be resolved to their satisfaction, can take a variety of actions, including untitled or warning letters, fines, consent decrees, injunctions, or civil or criminal penalties.

The aforementioned EU rules are generally applicable in the European Economic Area (“EEA”), which consists of the twenty-seven EU member states, as well as Iceland, Liechtenstein and Norway.

Other countries

Regulations in other countries, including the requirements for approvals, certification or clearance and the time required for regulatory review, vary from country to country. Certain countries, such as South Korea, Brazil, Australia and Canada, have their own regulatory agencies. These countries typically require regulatory approvals and compliance with extensive safety and quality system regulations included in the Medical Device Single Audit Program that we will be required to comply with on an ongoing basis. Failure to obtain regulatory approval in any foreign country in which we plan to market our products or failure to comply with any regulation in any foreign country in which we market our products may negatively impact on our ability to generate revenue and harm our business.

In addition, local regulations may apply, which govern the use of our products, and which could have an adverse effect on our product utilization if they are unfavorable. All such regulations are revised from time to time and, in general, are increasing in complexity and in the scope and degree of documentation and testing required. There can be no assurance that the outcomes from such documentation and testing will be acceptable to any particular regulatory agency or will continue to be acceptable over time. There are further regulations governing the importation, marketing, sale, distribution, use, and service as well as the removal and disposal of medical devices in the regions in which we operate and market our products. Failure to comply with any of these regulations could result in sanctions or fines and could prevent us from marketing our products in these regions.

Our ISO 13485 (quality management system) approval, CDSCO approval for the manufacture, sale and distribution of our products and our Indian export license allows us to market our products in fifty (50) non-FDA and non-CE (EU) countries without further regulatory approvals and in an additional seventy-nine (79) countries require only minimal registration. We have received regulatory approval to market and sell our products in the United Arab Emirates, Nepal, Indonesia, Guatemala Philippines, Ukraine and Sri Lanka and have initiated the regulatory approval process, in many other countries, which if successful, will allow us to market our products in more than fifty (50) countries within approximately one year. However, there can be no assurance as to when we will secure any such regulatory approvals, if at all.

Data Privacy and Security Laws

Numerous state, federal, and foreign laws, regulations, and standards govern the collection, use, access to, confidentiality, and security of health-related and other personal information and could apply now or in the future to our operations or the operations of our partners. In the U.S., numerous federal and state laws and regulations, including data breach notification laws, health information privacy and security laws and consumer protection laws and regulations govern the collection, use, disclosure, and protection of health-related and other personal information. In addition, certain foreign laws govern the privacy and security of personal data, including health-related data. Privacy and security laws, regulations, and other obligations are constantly evolving, may conflict with each other to complicate compliance efforts, and can result in investigations, proceedings, or actions that lead to significant civil and/or criminal penalties and restrictions on data processing.

We collect, process, share, disclose, transfer, and otherwise use data, some of which contains personal information about identifiable individuals including, but not limited to, our employees, clinical trial participants, partners, and vendors. Therefore, if we commence marketing our products in the U.S., the EU and other countries, we will be subject to U.S. (federal, state and local) and international laws and regulations, including those in the EEA regarding data privacy and security and our use of such data.

If we market our products in the EU, we will be subject to the European Union General Data Protection Regulation 2016/679 and applicable national supplementing laws (collectively, the “GDPR”). The GDPR imposes comprehensive data privacy compliance obligations in relation to our collection, processing, sharing, disclosure, transfer and other use of data relating to an identifiable living individual or “personal data,” including a principle of accountability and the obligation to demonstrate compliance through policies, procedures, training, and audits.

The GDPR also regulates cross-border transfers of personal data out of the EEA. Recent legal developments in Europe have created complexity and uncertainty regarding such transfers, in particular in relation to transfers to the United States.

Cybersecurity

In the normal course of business, we may collect and store personal information and other sensitive information, including proprietary and confidential business information, trade secrets, intellectual property, patient information, sensitive third-party information and employee information. To protect this information, our existing cybersecurity policies require continuous monitoring and detection programs, network security precautions, encryption of critical data and in-depth security assessments of vendors. We maintain various protections designed to safeguard against cyberattacks, including firewalls and virus detection software. We have established and regularly test our disaster recovery plan, and we protect against business interruption by backing up our major systems. In addition, we periodically scan our environment for any vulnerabilities, perform penetration testing and engage third parties to assess the effectiveness of our data security practices.

Employees

As of the date of this Annual Report, we had 378 employees, 175 of whom were engaged in manufacturing, 76 in marketing, sales, clinical support and field service, 61 in research and development, 26 in sourcing, 5 in quality control and 35 in administration. Most of our employees are based at our facility in Gurgaon, Delhi NCR, India. We generally consider our relationship with our employees to be good.

Item 1A. Risk Factors.

As a “smaller reporting company,” as defined in Rule 12b-2 under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), we are not required to provide the information required by this Item.

Item 1B. Unresolved Staff Comments.

Not applicable. 

Item 1C. Cybersecurity.

Item 2. Properties.

We lease approximately 70,000 square feet in Gurugram, Delhi NCR, India, which serves as our headquarters as well as our manufacturing facility. The facility, spread over three floors, is leased pursuant to a nine-year lease expiring in March 2030 for the third floor, another nine-year lease expiring in May 2032 for the ground floor and another six-year lease expiring in July 2030 for the first floor. All the leases are further renewable under similar mutually agreed terms.

Item 3. Legal Proceedings.

In April 2024, an ex-shareholder of Otto Pvt Ltd., an indirect wholly owned Bahamian subsidiary of SSi(“Otto”) commenced litigation in the Bahamas, seeking legal confirmation that it holds 9,000 shares (approximately a 9% interest) in Otto. The litigation, in which Otto is one of the defendants, relates to a purported transaction in 2021, at which time Dr. Sudhir Srivastava, the Company’s Chairman, Chief Executive Officer and principal shareholder, was the sole shareholder of Otto. The plaintiff in the litigation alleges that at that time, it acquired the 9,000 Otto shares from Dr. Srivastava. However, as the plaintiff failed to pay the agreed upon consideration for the shares, in July 2022, the shareholding was cancelled. Dr. Srivastava along with Otto, has recently filed an action in the Bahamas to confirm the cancellation of the shares and reconfirm their ownership and both actions are pending in the Bahamian courts. The Bahamian court has issued an interim order to maintain the status quo as it stands today with respect to the 9,000 Otto shares at the center of the dispute, as well as Otto’s shareholdings in Sudhir Srivastava Innovations Pvt Ltd. (“SSI-India”), our Indian operating subsidiary and SSI-India’s assets during the pendency of the litigation. Based on legal opinions obtained from counsel, the Company believes that there will be a favorable outcome in this case.

Notwithstanding the foregoing, Dr. Srivastava and the Company have entered into an Indemnification Agreement on October 12, 2024, pursuant to which Dr. Srivastava has agreed to fully indemnify the Company for any claims, damages and costs (including legal fees) which it incurs in connection with this litigation or in relation to any of his ventures prior to consummation of the Company’s acquisition by merger of CardioVentures, Inc. in April 2023.

Item 4. Mine Safety Disclosures.

Not applicable. 

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market Information

Our common stock is currently quoted on the OTC Pink tier of the over-the-counter market maintained by OTC Markets Group, Inc. under the symbol “SSII.” However, the trading market for our common stock is sporadic and extremely limited. Moreover, until the review of the Form 15c2-11 which has been filed with FINRA on our behalf is cleared by FINRA (as to which no assurance can be given), our common stock is not eligible for proprietary broker-dealer quotations on the over-the-counter market and may only be bought or sold in unsolicited customer orders. This further limits the trading market for our common stock. The Company has also applied to list its common stock on the Nasdaq Stock Market, LLC, although there is no assurance that such application will be approved or that in either case, a liquid trading market for the common stock will develop and be sustained.

Holders of our Common Stock

As of the date of this Annual Report, we had 193,559,340 shares of common stock issued and outstanding and 343 holders of record of our common stock. One of these holders is CEDE and Company, which is the mechanism used for brokerage firms to hold securities in book entry form on behalf of their clients and as of the date of this Annual Report, they held approximately 15,051,246 shares of common stock for these shareholders.

Dividends

The payment by us of dividends, if any, in the future rests within the discretion of our board of directors and will depend, among other things, upon our earnings, capital requirements and financial condition, as well as other relevant factors. We have not paid any dividends since our inception and we do not intend to pay any cash dividends in the foreseeable future, but intend to retain all earnings, if any, for use in our business.

Securities Authorized for Issuance under Equity Compensation Plans

Recent Sales of Unregistered Securities

In March 2024, the Company issued 15,000 shares of common stock to an investor relations firm for investor relations and digital marketing services.

In August 2024, the Company issued 125,000 shares to certain doctors/proctors for providing their proctoring/mentoring services.

In December 2024, the Company issued 9,034 shares of common stock to a marketing advisory services firm for providing dedicated support, production, graphics, post-production and distribution services.

All of the foregoing securities were issued in accordance with the exemption from registration afforded by Section 4(a)(2) of and/or Regulation D under the Securities Act, as amended, as the persons receiving such shares having provided the Company with appropriate representations as to their investment intent and their status as “accredited investors” as defined in Rule 501(a) of Regulation D promulgated under the Securities Act.

Item 6. [Reserved]

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Introduction

The Company is engaged in the business of developing, manufacturing, and selling a surgical robotic system under our proprietary brand “SSi Mantra,” together with allied accessories and a wide range of surgical instruments capable of supporting cardiac and a variety of other surgical procedures under our proprietary brand “SSi Mudra”. Having commenced commercial sales of our surgical robotic system in the second half of 2022, the year 2023 was our first full year of commercial sales and during the year 2024, we further consolidated our installed base of SSi Mantra in various parts of India and also expanded our presence in the global markets.

Our financial performance is largely driven by increasing awareness of the benefits of robotically assisted surgery, reduced learning curves for robotic surgeons and the affordability and accessibility of surgical robotic technology. Our financial performance is also dependent on our obtaining regulatory approvals in various regulated markets where we have plans to sell our products. Robotically assisted surgeries are increasingly being recognized as an approved treatment modality from an insurance coverage perspective.

Our manufacturing operations being based in India derive significant operating cost advantages in terms of availability of quality and cost-effective fabrication/3D printing solutions, electronic/electrical/mechanical components, outsourced services and skilled manpower. All these factors help us in having lower costs of production which eventually helps us make our surgical robotic system cost effective and relatively affordable.

During the year ended December 31, 2024, we sold 36 surgical robotic systems out of which 7 systems were sold on deferred payment basis. In addition, during the year ended December 31, 2024, we also installed 11 systems on a pay-per-use basis. The system installed at the Johns Hopkins Hospital in Baltimore Maryland for research and clinical training, having completed one year period post its import into USA, was returned back to India in compliance with the Indian government regulations for medical devices exported overseas for exhibition/clinical training/research purposes. During the year ended December 31, 2024, we also received back 3 systems which, as of December 31, 2023, were installed in 3 hospitals for evaluation purposes and as such we had no systems under evaluation at any of the hospitals as on December 31, 2024. At the end of December 2024, we had a total of 62 installed systems of which 47 were installed during the year ended December 31, 2024.

Results of Operations

Introduction

The financial statements appearing elsewhere in this report have been prepared assuming that the Company will continue as a going concern. The Company is still in its initial years of revenue generation by way of the sale of its product and has not yet established consistent operational revenue cash flows to meet all its fixed operating costs and hence may continue to incur losses for some time. These conditions raise doubt about the Company’s ability to continue as a going concern.

The following table provides selected financial data about our Company at December 31, 2024, and December 31, 2023:

To date, the Company has mainly relied on debt and equity raised in private offerings to finance its operations. During 2025, the company plans to raise additional capital through further private or public offerings. However, if we are unable to do so and if we experience a shortfall in operating capital, we could be faced with having to limit our expansion plans, research and development and marketing activities.

Year ended December 31, 2024, as compared to year ended December 31, 2023

Revenues. During the year ended December 31, 2024, the Company had revenues of $20,649,528 (comprising $19,457,767 of system sales, $942,548 of instrument sales and $177,518 of warranty sales and $71,695 of Lease income), compared to revenues of $5,875,314 (comprising $5,225,777 of system sales, $647,766 of instrument sales and $1,771 of warranty sales) during the year ended December 31, 2023.The increase in revenue is primarily due to sale of increased number of surgical robotic systems and instruments in the year ended December 31, 2024 as compared to the year ended December 31, 2023.

Research and Development Expenses. Research and Development expenses during the year ended December 31, 2024, were $2,491,771, as compared to $1,058,660 for the year ended December 31, 2023. The increase in the Research and Development expenses as compared to the previous year is in line with the Company’s continued focus on improving the design and technological capabilities of its existing SSi Mantra system and further expanding its product offerings.

Stock Compensation Expense. We had stock compensation expenses of $14,342,784 and $9,723,492 during the years ended December 31, 2024, and December 31, 2023 respectively. The substantial increase in the stock compensation expense in 2024 is primarily the result of the award of second tranche of stock grants to employees of the Company and its subsidiaries and the issuance of stock awards and stock options to executive officers of the Company and its subsidiaries in November 2024 under our Incentive Stock Plan, in recognition of their efforts in Company’s operational growth.

Depreciation and amortization expenses. We had depreciation and amortization expense of $436,005 for the year ended December 31,2024, as compared to $152,738 in the year ended December 31, 2023. The depreciation and amortization expenses primarily consist of depreciation on fixed assets only.

Selling, General and Administrative expenses. We incurred $10,157,768 in selling, general and administrative expenses during the year ended December 31, 2024, as compared to $10,064,622 for the year ended December 31, 2023.

Our Selling, General and Administrative expenses (“SG&A”) comprise of expenses relating to salaries and benefits, retirement benefits as well as costs related to recruitment, other compensation expenses of sales and marketing and client management personnel, sales commission, travel and brand building, client events and conferences, training and retention of senior management and other support personnel in enabling functions, telecommunications, utilities, travel and other miscellaneous administrative costs. SG&A expenses also include acquisition-related costs, legal and professional fees (which represent the costs of third party legal, tax, accounting, immigration and other advisors), investment in product development, digital technology, advanced automation and robotics, related to grant of our equity awards to members of our board of directors. We expect our SG&A costs to increase as we continue to strengthen our support and enabling functions and invest in leadership development, performance management and training programs. The increase in selling, general and administrative expenses resulted from the increased manpower strength and an increased scale of commercial operations during 2024 as compared to the year ended December 31, 2023.

Other Income (Expenses). We have incurred $175,235 in interest expenses (net) during the year ended December 31, 2024, as compared to an interest expense (net) of $604,308 during the year ended December 31, 2023. The decrease in interest expense (net) from 2023 to 2024 is due to increase in interest income on fixed deposits with HDFC bank in India and interest income recognized during the year related to deferred payment sales.

Net Loss. We incurred a net loss of $19,151,197 for the year ended December 31, 2024, as compared to a net loss of $20,878,292 for the year ended December 31, 2023. The decrease in net loss from 2023 to 2024 is primarily due to increase in gross profit of $7,726,838, offset by increase in stock compensation expense and of $4,619,292 and decrease in interest expense (net) of $ 175,235 from $ 604,308 respectively.

Liquidity and Capital Resources

The Company expects to require substantial funds for scaling up its operations, incurring capital expenditures to have its own manufacturing facility for in-house machining and tooling capacity and to continue to finance its research and development work in the field of surgical robotics.

As of December 31, 2024, the Company had shareholders’ equity of $13,457,103 and a working capital surplus of $6,086,069 as compared to shareholders’ equity of $19,718,078 and a working capital surplus of $12,954,939 as of December 31, 2023.

Cash Flows Used in Operating Activities

Net cash used in operating activities was $9,503,030 for the year ending 31 December 2024, compared to $15,361,645 for the year ending 31 December 2023, reflecting lower cash losses and decrease in working capital needs due to increased scale of operations. The major drivers contributing to the decrease of $5,858,615 in net cash used in operating activities year-over-year included the following:

Cash Flows from Investing Activities

During the year ended December 31, 2024, we had net cash used in investing activities of $661,479 resulting from purchases of property, plant and equipment.

During the year ended December 31, 2023, we had net cash used in investing activities of $453,327 resulting from purchase of property, plant and equipment.

Cash Flows from Financing Activities

During the year ended December 31, 2024, we had net cash, provided by financing activities of $9,425,980, which comprised of $1,975,980 in proceeds from our bank overdraft facility, $3,000,000 each in proceeds from issuance of convertible notes and promissory notes to our principal shareholder and $1,450,000 in proceeds from issuance of convertible notes to other investors.

During the year ended December 31, 2023, we had net cash, provided by financing activities of $22,796,286, which comprised of $2,480,735 in proceeds from our bank overdraft facility, $412,056 in proceeds from issuance of common stock against warrant and options, $16,980,000 in proceeds from issuance of convertible notes to our principal shareholder, $3,000,000 in proceeds from issuance of convertible notes to other investors and $50,000 in proceeds from the exercise of stock options. There was a decrease of $126,505 on account of repayment of term loans

While we have been successful in raising funds to finance our operations since inception and we believe that we will be successful in obtaining the necessary financing to fund our operations going forward, we do not have any committed sources of funding and there is no assurance that we will be able to secure additional funding. The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern; however, if we cannot obtain financing, then we may be forced to further curtail our operations or consider other strategic alternatives. Even if we are successful in raising the additional financing, there is no assurance regarding the terms of any additional investment and any such investment or other strategic alternative would likely substantially dilute our current shareholders.

Critical Accounting Estimates

Use of Estimates

The discussion and analysis of our financial condition and results of operations are based upon the consolidated financial statements included in this Annual Report on Form 10-K, which have been prepared in accordance with U.S. generally accepted accounting principles (“U.S. GAAP”). A summary of our significant accounting policies is included in Note 2 - Summary of Significant Accounting Policies to our consolidated financial statements under Part II, Item 15, “Exhibits and Financial Statements Schedules.”

We consider the policies discussed below to be critical to an understanding of our consolidated financial statements, as their application places the most significant demands on management’s judgment regarding matters that are inherently uncertain at the time an estimate is made.

These policies include fair value of stock options and standalone selling price in case of bundled revenue contracts.

These accounting policies, estimates and the associated risks are set out below. Future events may not develop exactly as forecasted and estimates routinely require adjustment.

Stock Compensation Expense

Under the fair value recognition provisions of ASC Topic 718, Compensation-Stock Compensation, cost is measured at the grant date based on the fair value of the award and is amortized on a straight-line basis over the requisite service periods of the awards, which is generally the vesting period.

Determining the fair value of stock-based awards at the grant date requires significant judgment, including estimating the expected term over which the stock awards will be outstanding before they are exercised and the expected volatility of our stock.

As of December 31, 2024, the Company has issued two types of equity incentives:

Stock Options: These provide employees with the right, but not the obligation, to purchase shares of the Company’s stock at a specified price, within a defined period, as per the terms of the stock option agreement. Stock-based compensation expense associated with AVRA 2016 Stock Incentive Plan is measured at fair-value using a Black-Scholes option-pricing model at commencement of each offering period and recognized over that offering period.

Stock Units (Restricted Stock Units, or RSUs): These do not require the employee to exercise any options. Each stock unit automatically converts into a specified number of shares upon vesting. The Company uses last three months’ average share price of common stock on OTC exchange as grant date fair value for RSUs.

Standalone Selling Price:

Our system sale arrangements contain multiple products and services, including system, accessories, instruments and services. Other than services, we generally deliver all of the products upfront. Each of these products and services is a distinct performance obligation. System, instruments, accessories and services are also sold on a standalone basis. For multiple-element arrangements, revenue is allocated to each performance obligation based on its relative standalone selling price. Standalone selling prices are based on observable prices at which we separately sell the products or services. If a standalone selling price is not directly observable, then we estimate the standalone selling prices considering market conditions and entity-specific factors including, but not limited to, historical pricing data, features and functionality of the products and services and industry benchmark. We regularly review standalone selling prices and maintain internal controls over establishing and updating these estimates. Revenue that is allocated to the service obligation is deferred and recognized ratably over the service period upon expiration of first year of service which is free and included in the system sale arrangements.

Off-Balance Sheet Arrangements

There are no off-balance sheet arrangements that have or are reasonably likely to have a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that is material to investors.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Not applicable.

Item 8.  Financial Statements and Supplementary Data.

See the Index to the Financial Statements beginning on page F-1 below.

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.

None.

Item 9A. Controls and Procedures. 

(a) Disclosure Controls and Procedures

Our Chief Executive Officer and Chief Financial Officer evaluated the effectiveness of the design and operation of our disclosure controls and procedures and internal control over financial reporting, as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), as of December 31, 2024.

To ensure that information required to be disclosed by us in the reports filed or submitted by us under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the rules and forms of the SEC, including to ensure that information required to be disclosed by us in the reports filed or submitted by us under the Exchange Act is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

Based on the evaluation performed as of December 31, 2024, as a result of the material weaknesses in internal control over financial reporting that are described below in Management’s Report on Internal Control Over Financial Reporting, our Chief Executive Officer and Chief Financial Officer determined that our disclosure controls and procedures were not effective as of such date.

Internal Controls over Financial Reporting

Management’s Report on Internal Controls Over Financial Reporting

Management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). A company’s internal control over financial reporting is a process designed by, or under the supervision of, its Chief Executive Officer and Chief Financial Officer, and effected by such company’s board of directors, management and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and includes those policies and procedures that:

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of a company’s annual or interim consolidated financial statements will not be prevented or detected on a timely basis.

Management, with the participation of our Chief Executive Officer and Chief Financial Officer, has conducted an evaluation of the effectiveness of our internal control over financial reporting as of December 31, 2024, based on the framework set forth in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Based on this assessment, management has concluded that the Company did not maintain effective internal control over financial reporting as of December 31, 2024 due to the material weaknesses described below.

Remediation Plan

The Company has been addressing and remediating these material weaknesses with the support and assistance of the accounting and financial staff employed by our Indian operating subsidiary. We have enhanced the review process for significant transactions to ensure proper accounting treatment under applicable guidelines and have engaged the external experts to provide guidance to the Company staff in the areas of financial reporting, internal controls, and enterprise risk management and assist it in the application of accounting principles to complex transactions. This external expert group is also helping the Company in strengthening its existing internal controls, policies and Standard Operating Procedures (“SOPs”) in all the major functional areas.

In addition, we have also engaged services of external experts in the field of designing, development and implementation of a comprehensive cloud-based ERP system. The ERP implementation process involves a detailed process study of each of the business functions and engagement with their respective process owners, identifying their linkages with other business functions and designing report formats, data sourcing and customizing the ERP system and training of the respective teams to meet the business data flow and reporting requirements of each business function. Post completion of roll out of all the functional modules under this new cloud-based ERP system which is designed to integrate all business functions within the accounting and financial department would help us in further addressing the abovementioned weaknesses.

Our Chief Executive Officer and Chief Financial Officer do not expect that our disclosure controls or internal controls will prevent all errors and all fraud. Although our disclosure controls and procedures were designed to provide reasonable assurance of achieving their objectives, a control system, no matter how well conceived and operated, can provide only reasonable, not absolute assurance that the objectives of the system are met. Further, the design of any control system is subject to resource constraints and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the Company have been detected. These inherent limitations include the fact that judgments in decision-making can be faulty, and that breakdowns can occur because of simple errors or mistakes. There can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions.

(b) Changes in Internal Controls Over Financial Reporting

Except for the remediation efforts described above, there were no changes in our internal controls over financial reporting that occurred during the last fiscal quarter covered by the Form 10-K that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Item 9B. Other Information.

None.

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections.

None.

PART III

Item 10. Directors, Executive Officers and Corporate Governance.

Our directors and executive officers and their respective ages and titles are as follows:

Set forth below is a brief description of the background and business experience of our directors and executive officers.

Sudhir Srivastava, M.D., joined the Company on April 14, 2023, as its Chairman, Chief Executive Officer and a director upon completion of the CardioVentures Merger. Dr. Srivastava founded Sudhir Srivastava Innovations Pvt. Ltd. (“SSI-India”), our Indian operating subsidiary in 2019 and has served as its Chairman, Managing Director and Chief Executive Officer since that time. SSI-India was founded with the objective of launching the development of an advanced, affordable, and accessible surgical robotic system that would benefit greater numbers of patients around the world. Dr. Srivastava completed his medical degree in India in 1971 and moved to the United States in 1972, where he underwent a residency in general surgery in St. Louis and further completed his training, including in cardiothoracic surgery, at the University of British Columbia Hospitals in Vancouver, Canada. He is double board certified by the American Board of Surgery and Thoracic Surgery. Dr. Srivastava, after moving to Texas to begin his practice in 1981, became heavily involved in advancing minimally invasive cardiac surgical approaches and robotic cardiac surgery procedures during his time in Texas. While in Texas, in 2002 Dr. Srivastava was the founding chairman of Alliance Hospital, which became one of the busiest robotic cardiac centers globally. In 2007, Dr. Srivastava joined the University of Chicago faculty and served as the Director of Robotic Cardiac Surgery to launch their program. In 2009, Dr. Srivastava moved to Atlanta, Georgia, and founded the International College of Robotic Surgery and launched the Robotic Revascularization Program at St. Joseph’s Hospital. While in the United States, he performed over 1,400 robotic cardiothoracic procedures and trained over 350 surgical teams from around the world. His passion and experience took him to various countries around the world, where he helped launch robotic cardiac surgery programs. Dr. Srivastava returned to India in 2011 to establish robotic surgery programs throughout the country during a time when robotic surgery was still nascent in India. He founded the International Centre for Robotic Surgery in Delhi, India, and trained surgeons in different specialties, introducing them to high-level robotic cardiac surgery procedures. Recognizing the high cost and limited access to robotic surgery in India, in 2012, Dr. Srivastava undertook the mission of developing an affordable system that would be technologically advanced, so that greater numbers of patients could benefit from robotic cardiac surgery in India and worldwide. His efforts led to the development of the SSi Mantra Surgical Robotic System by the SSi Companies Group, which was commercially introduced in August 2022. Dr. Srivastava is globally recognized as a pioneer and leader in robotic cardiac surgery and has received numerous awards worldwide for advancing the field.

Anup Kumar Sethi joined the Company on April 14, 2023, as its Chief Financial Officer, upon completion of the Cardio Ventures Merger. Mr. Sethi has served as Chief Financial Officer of SSI-India since January 2023 and has been associated with SSI-India since 2018 on a consulting basis as a financial advisor. For over ten years prior thereto, he held senior management positions in well-established healthcare companies in India, including Fortis and International Oncology. With close to thirty years of overall experience and having worked in India, China, South Africa, and Nigeria, in organizations of various sizes belonging to a diverse range of industries like automotive tires manufacturing, textiles, digital media and healthcare delivery, Mr. Sethi is very well adapted to building and working with multi-faceted, multi-cultural teams. Mr. Sethi has a FCMA qualification (Fellow Member of Institute of Cost Accountants of India), an Associate membership of CPA, Australia, and a Certified Financial Planner (CFP) certification from the Financial Planning Standards Board, with hands-on experience in leading teams in the functional areas of corporate finance, strategy, accounting, compliance and business development.

Vishwajyoti P. Srivastava, M.D., joined the Company on April 14, 2023, as its President, Chief Operating Officer – South Asia and a director upon completion of the CardioVentures Merger. Dr. Srivastava joined SSI-India as President and Chief Operating Officer for South Asia in November 2020. Prior to that, he served as President of OMNI 3DHD from January 2018 to November 2020, where he led the development of a secondary 3D Visualization System that was designed with the objective of giving 3D vision to the entire robotic surgical team. In 2015, Dr. Srivastava served as the COO of a Miami based health and wellness startup, Reshape Inc., that developed an online platform for healthy living initiatives. Dr. Srivastava was also instrumental in the creation of the International College of Robotic Surgery in Atlanta, Georgia, in 2009 as well as the International Centre for Robotic Surgery in New Delhi, India, in 2011. Dr. Srivastava has been deeply involved in the field of surgical robotics since 2008, covering the wide spectrum of clinical applications, teaching and training, tele-mentoring platforms, web-based surgeon didactic training modules, digital media and marketing. Dr. Srivastava graduated from Saint James School of Medicine in Anguilla, receiving his M.D. degree in August 2020. Dr. Srivastava also holds a B.A. in International Studies with a focus on South Asia from the University of Washington in Seattle that he received in 1999. Dr. Srivastava completed all his premedical requirements at Columbia University’s Post Baccalaureate Program in New York City, graduating in 2003. He is fluent in English, Hindi and French.

Barry F. Cohen co-founded the Company (then known as Avra Medical Robotics, Inc.) and served as its Chief Executive Officer and a director from February 4, 2015, until completion of CardioVentures Merger on April 14, 2023, when he assumed the position of Chief Operating Officer-Americas and continued as a director. Between 2006 and 2008, Mr. Cohen was a private investor and founded AVRA Surgical, Inc., a medical technology company. Prior to founding the Company, Mr. Cohen was a director of Dualis Med-Tech from 2012 to 2014 and was a director of AvraMiro GmbH from 2009 to 2014 and Avra Surgical Robotics, Inc. since 2011, which is currently inactive. From approximately 1979 to 1983 he served as director of Synalloy Corp., a manufacturer of pipe, piping systems and specialty chemicals after which he was appointed to serve as President from 1984 to 1985. Mr. Cohen also served as Chairman of the Executive Board of Wolverine Technologies, Inc., a NYSE listed company from 1979 to 1983 and President of Barry F. Cohen & Co., an NASD member from 1983 to 1999. Mr. Cohen has over fifty years’ experience in managing private and public industrial companies, and forty-seven years’ experience as a securities executive.

Dr. Mylswamy Annadurai joined the Company as a director on July 30, 2023. Dr. Annadurai is a distinguished space scientist of international repute, who has been involved in the Indian space program for over forty years, approximately thirty-six of which (1982-2018) were spent in various positions with the Indian Space Research Organization (“ISRO”), most recently as Director of the ISRO Satellite Center from April 2015 to July 2018. During that period, he was responsible for overseeing the development, manufacture and launch of twenty-nine satellites. Prior thereto, he also served as Program Director of Indian Remote Sensing and Small Satellite Program at ISRO from 2011-2015, where among other matters, he was responsible for overseeing ISRO’s Mars Orbiter Mission and as Project Director of India’s firs lunar mission, Chandarayaan-1, from 2004-2010. From August 2018 until March 2022, Dr. Annadurai served as Chairman of the National Design and Research Forum and from October 2018 to March 2023, he served as Vice President of the Tamil Nadu State Council for Science and Technology. Since May 2019. Dr. Annadurai has been serving as Chairman of the Aerospace Committee of the Southern India Chamber of Commerce and Industries in Chennai and since March 2021, as a director of Moon Land Technologies Pvt. Ltd. Since February 2023, he is also serving as a Trustee Member of the India Trustee Board of the America-India Foundation. Dr. Annadurai has received numerous awards from the Indian government, ISRO, international space organizations, academic institutions and professional bodies and societies. Dr. Annadurai holds B.E. (ECE), M.E. (Applied Electronics) and Ph.D. degrees from Anna University.

Dr. S.P. Somashekhar joined the Company as a director on July 30, 2023. Dr. Somashekhar is a highly respected surgical oncologist and one of the first physicians to employ robotic surgery in India. Since January 2022, he has been affiliated with the Aster Group of Hospitals in India, where he serves as Global Director of the Aster International Institute of Oncology and Head of Department and Lead Consultant in Surgical and Gynecological Oncology and Robotic Surgery. He also serves as Chairman of the Medical Advisory Board for Aster DM Healthcare. For over twenty years prior to joining Aster, he was affiliated with Manipal Hospitals in Bengaluru, most recently as Head of Department of Surgical Oncology and Chairman of the Surgical Oncology Advisory Board. Dr. Somashekhar has served in a number of teaching positions, significant experience in conducting clinical studies, authored numerous medical papers and articles and received multiple awards in the medical field. He holds an M.B.B.S. degree from Mysuru University, an M.S. in General Surgery from the Sheth K.M. School of Postgraduate & Research in Ahmedabad, and an MCh in Oncosurgery from the Gujarat Cancer & Research Institute in Ahmedabad. He is also a Fellow of the Royal College of Surgeons (Edinburgh). 

Dr. Frederic H Moll joined the Company as a Director on August 20, 2024. Dr. Moll is a renowned physician and visionary entrepreneur whose pioneering work in medical robotics has shaped the field of minimally invasive surgery. He did his B.A. from the University of California at Berkeley, an M.D. from the University of Washington, and an M.S. in Business Management from Stanford University. He is a pioneer in Medical Robotics, particularly in minimally invasive surgery. Dr. Moll co-founded Intuitive Surgical in 1995, where he co-developed the da Vinci robotic-assisted surgery system, a global standard for minimally invasive surgery. He also founded Hansen Medical and Auris Health, creating advanced robotic technologies for vascular procedures and lung cancer diagnosis, respectively. His innovations have shaped the field of surgery, and he has served on the Boards of influential Healthcare Tech companies like Mako Surgical and RefleXion.

Tim Adams joined the Company as a Director on August 20, 2024. Mr. Adams served as President and CEO of Ascension Saint Thomas Health and Ministry Market Executive for Ascension Tennessee from January 2018 until January 2023, leading a network of nine inpatient facilities across Middle Tennessee. Prior to this, he was the Texas Region Chief Executive Officer at Tenet Healthcare, overseeing 26 hospitals and leading operational efforts for one of the company's largest regions. Earlier in his career, Mr., Adams served as CEO of Cedar Park Regional Medical Center, a partner with Ascension's Seton Healthcare Family, and held executive roles at Community Health Systems and IASIS Healthcare, overseeing multi-hospital operations in Texas and Florida. Beyond his professional commitments, he is also an active member of the healthcare community, serving on numerous boards, including the Tennessee Hospital Association, Nashville Health Care Council, and the United Way of Greater Nashville. He holds a Bachelor of Business Administration from Baylor University and an MBA from The University of Texas at El Paso. In January 2023, Tim transitioned to the role of Regional Operating Officer and Senior Vice President for Ascension, overseeing Ascension ministries in 10 states, including Tennessee.

Terms of Office

Our directors are appointed for a one-year term to hold office until the next annual meeting of our stockholders and until a successor is appointed and qualified, or until their removal, resignation, or death.  Executive officers serve at the pleasure of the board of directors.

Family Relationships

There are no other familial relationships among our officers and directors.

Board Committees and Independence

In an effort to improve our corporate governance, the company has constituted three standing committees: an audit committee, a compensation committee and a nominating and corporate governance committee.

Our board of directors has determined that Dr. Annadurai, Dr. Somashekhar, Dr. Moll and Mr. Adams are “Independent” within the meaning of the applicable rules and regulations of the SEC and the listing standards of the Nasdaq Stock Market. Each Committee consists of at least two Independent Directors. In addition, the board has determined that Mr. Adams is an “audit committee financial expert” as the term is defined by the applicable rules and regulations of the SEC and the Nasdaq Stock Market listing standards, based on his business and management experience

Members of the aforesaid Committee (s) are as follows:

Audit Committee

The audit committee assists our board of directors in its oversight of the Company’s accounting and financial reporting processes and the audits of the Company’s financial statements, including (a) the quality and integrity of the Company’s financial statements; (b) the Company’s compliance with legal and regulatory requirements; (c) the independent auditors’ qualifications and independence; and (d) the performance of our Company’s internal audit functions and independent auditors, as well as other matters which may come before it as directed by the board of directors. Further, the audit committee, to the extent it deems necessary or appropriate, among its several other responsibilities, shall:

Compensation Committee

The compensation committee aids our board of directors in meeting its responsibilities relating to the compensation of the Company’s executive officers and to administer all incentive compensation plans and equity-based plans of the Company, including the plans under which Company securities may be acquired by directors, executive officers, employees and consultants. Further, the compensation committee, to the extent it deems necessary or appropriate, among its several other responsibilities, shall:

Nominating and Corporate Governance Committee

The nominating and corporate governance committee shall recommend to the board of directors individuals qualified to serve as directors and on committees of the board of directors to advise the board of directors with respect to the board of directors composition, procedures and committees to develop and recommend to the board of directors a set of corporate governance principles applicable to the Company; and to oversee the evaluation of our board of directors and management.

Further, the nominating and corporate governance committee, to the extent it deems necessary or appropriate, among its several other responsibilities shall:

Compliance with Section 16(a) of the Securities Exchange Act of 1934

Section 16(a) of the Exchange Act requires our executive officers and directors and persons who own more than 10% of a registered class of our equity securities to file with the SEC initial statements of beneficial ownership, reports of changes in ownership and annual reports concerning their ownership of our common stock and other equity securities, on Forms 3, 4 and 5 respectively. Executive officers, directors and greater than 10% stockholders are required by the SEC regulations to furnish us with copies of all Section 16(a) reports that they file.

Based solely on our review of the copies of such forms received by us, or written representations from certain reporting persons, we believe that all filing requirements applicable to our officers, directors and greater than 10% beneficial owners were complied with under Section 16 of the Exchange Act during the year ended December  31, 2024, and up through the date of this Annual Report, except for the following late filings resulting from administrative oversights:

Rule 10b5-1 Trading Arrangements

During the year ended December 31, 2024, no director or officer (as defined in Rule 16a-1(f) under the Exchange Act) of the Company adopted or terminated any Rule 10b5-1 trading arrangements or non-Rule 10b5-1 trading arrangements (in each case, as defined in Item 408(a) of Regulation S-K).

Code of Ethics

We have adopted a Code of Ethics that applies to employees, including our principal executive officer, principal financial officer and/or people performing similar functions.

Board of Directors Role in Risk Oversight

Members of the board of directors have periodic meetings with management and the Company’s independent auditors to perform risk oversight with respect to the Company’s internal control processes. The Company believes that the board’s role in risk oversight does not materially affect the leadership structure of the Company.

Insider Trading Policies and Procedures

We have adopted insider trading policies and procedures governing the purchase, sale, and/or other dispositions of our securities by our directors, officers and employees, and the Company itself, that are reasonably designed to promote compliance with insider trading laws, rules and regulations, and any listing standards applicable to the Company.

Involvement in Certain Legal Proceedings

To the best of our knowledge, during the past ten years, none of our directors or executive officers were involved in any of the following: (1) any bankruptcy petition filed by or against any business of which such person was a general partner or executive officer either at the time of the bankruptcy or within two years prior to that time; (2) any conviction in a criminal proceeding or being subject to a pending criminal proceeding (excluding traffic violations and other minor offenses); (3) being subject to any order, judgment, or decree, not subsequently reversed, suspended or vacated, of any court of competent jurisdiction, permanently or temporarily enjoining, barring, suspending or otherwise limiting his involvement in any type of business, securities or banking activities; and (4) being found by a court of competent jurisdiction (in a civil action), the Securities and Exchange Commission or the Commodities Futures Trading Commission to have violated a federal or state securities or commodities law, and the judgment has not been reversed, suspended or vacated.

Compensation Committee Interlocks and Insider Participation

None of our officers currently serves, or in the past year has served, as a member of the compensation committee of any entity that has one or more officers serving on our Board of Directors.

Item 11. Executive Compensation.

Summary Compensation Table

The table below summarizes all compensation awarded to earned by or paid to our Chief Executive Officer and our other executive officers for the years ended December 31, 2024.

Employment Agreements

The Company, through Otto Pvt. Ltd., an indirect, wholly owned subsidiary was party to employment agreements with each of Dr. Sudhir Srivastava, Anup Kumar Sethi and Dr. Vishwajyoti P. Srivastava. Dr. Sudhir Srivastava’s employment agreement with a base annual salary of $600,000 was with Otto Pvt Ltd. for a five-year period expiring in September 2026. Effective August 1, 2024, his employment agreement was moved to the Company on similar compensation terms now expiring in July 2027. Mr. Sethi’s employment agreement with an annual base salary of $175,000 was also with Otto Pvt Ltd. for a five-year (5-year) period expiring in January 2028. Effective August 1, 2024, his engagement contract was moved to the subsidiary company in India on the same terms of compensation (now payable in local currency) having a term of five years. Dr. Vishwajyoti P. Srivastava’s employment agreement with an annual base salary of $ 200,000 was also with Otto Pvt Ltd. and effective August 1, 2024, it was restructured as a consulting agreement with the Company with the same annual base compensation of $200,000 now expiring in July 2026. Each of the employment/consulting/engagement agreements contain customary confidentiality, assignment of proprietary rights, non-competition and non-solicitation provisions.

The Company is party to an employment agreement with Barry F. Cohen for a three-year (3-year) period expiring in April 2026, which provides for an annual base salary of $180,000. The employment agreement also provides for reimbursement of other reasonable business expenses incurred by Mr. Cohen in the performance of his duties and contains customary confidentiality, assignment of proprietary rights, non-competition and non-solicitation provisions.

Outstanding Equity Awards at Fiscal Year-End Table

The table below summarizes all unexercised options, stock that has not vested, and equity incentive plan awards for each of our executive officers outstanding as of December 31, 2024.

The above are options to purchase common stock granted under our Incentive Plan. The options vest in five equal annual instalments commencing upon the date of grant and expire five years from the date of grant.

Compensation of Directors Table

The table below summarizes all compensation paid to our directors for the year ended December 31, 2024, our last completed fiscal year.

Narrative Disclosure to the Director Compensation Table

The Company has not established a formal compensation arrangement for its non-employee directors but anticipates that they will initially be compensated with periodic grant of options under the 2016 Incentive Stock Plan, in the discretion of the board of directors. Non-employee directors are also reimbursed for travel and lodging expenses in connection with their attendance at in-person meetings of the board. When the Company is sufficiently capitalized, the Company may institute payment of cash directors’ fees to its non-employee directors in amounts to be determined at that time.

2016 Incentive Stock Plan 

Our 2016 Incentive Stock Plan (the “Incentive Stock Plan”) provides for equity incentives to be granted to our employees, executive officers or directors or to key advisers or consultants. Equity incentives may be in the form of stock options with an exercise price not less than the fair market value of the underlying shares as determined pursuant to the 2016 Plan, restricted stock awards, other stock-based awards, or any combination of the foregoing. In the absence of a compensation committee, the 2016 Plan was administered by the board of directors. However, with the recent constitution of compensation committee, the Plan will henceforth be administered by the compensation committee, 3,000,000 shares of our common stock were originally reserved for issuance pursuant to the exercise of awards under the 2016 Plan. In August 2019, our board of directors and our majority shareholders approved an increase in the number of shares reserved under the 2016 Plan to 10,000,000 shares of our common stock. Our board of directors and majority shareholders in July 2022, approved a subsequent increase in the number of shares of our common stock reserved under the 2016 Plan to 20,000,000 shares of common stock. Our board of directors and majority shareholders in October 2023 mandated to keep 10% of our issued and outstanding common shares reserved under the 2016 Incentive Stock Plan. As of December 31, 2024, we have granted options to purchase 7,767,431 shares under the 2016 Plan, exercisable at $5.00 per share and 4,375,407 shares in stock grants.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters. 

The following table sets forth, as of the date of this Annual Report, the beneficial ownership of our common stock by (i) each director and executive officer; (ii) directors and executive officers as a group; (iii) each other five percent (5%) beneficial owner of our common stock.

The percentage ownership information shown in the table is based upon 193,559,340 shares of common stock outstanding as of the date of this Annual Report. Unless otherwise stated, the address of the persons set forth on the table is c/o the Company.

Beneficial ownership is determined in accordance with the rules of the SEC and includes voting or investment power with respect to the securities. Except as otherwise indicated, each person or entity named in the table has sole voting and investment power with respect to all shares of our capital shown as beneficially owned, subject to applicable community property laws. In accordance with SEC rules, shares of our common stock which may be acquired upon exercise of stock options which are currently exercisable or which become exercisable within sixty (60) days of the date of this Annual Report are deemed beneficially owned by the holders of such options and are deemed outstanding for the purpose of computing the percentage of ownership of such person, but are not treated as outstanding for the purpose of computing the percentage of ownership of any other person

Unless otherwise indicated, the address for all our directors and executive officers is, care of the Company, 404-405, 3rd Floor, iLabs Info Technology Centre, Udyog Vihar, Phase III, Gurugram, Haryana 122016, India.

The people named above have full voting and investment power with respect to the shares indicated. Under the rules of the SEC, a person (or group of persons) is deemed to be a “beneficial owner” of a security if he or she, directly or indirectly, has or shares the power to vote or to direct the voting of such security, or the power to dispose of or to direct the disposition of such security. Accordingly, more than one person may be deemed to be a beneficial owner of the same security.

Securities Authorized for Issuance under Equity Compensation Plans

Item 13. Certain Relationships and Related Transactions, and Director Independence.

Information to be filed pursuant to this Item 13 are appended to this Annual Report on Form 10-K filed herewith can be found at Part IV, Item 15, “Exhibits and Financial Statement Schedules.” under Note- 21.

Item 14. Principal Accounting Fees and Services.

Fees billed by our independent registered public accounting firms, BDO India LLP (“BDO”) and BF Borgers CPA PC. for services provided for fiscal year 2024 and BF Borgers CPA PC. for fiscal year 2023 were as follows:

Audit Fees

This category includes the audit of our annual financial statements, review of financial statements included in our Quarterly Reports on Form 10-Q and services that are normally provided by the independent registered public accounting firm in connection with engagements for those fiscal years. This category also includes advice on audit and accounting matters that arose during, or as a result of, the audit or the review of interim financial statements.

Audit-Related Fees

This category consists of assurance and related services by the independent registered public accounting firm that are reasonably related to the performance of the audit or review of our financial statements and are not reported above under “Audit Fees.” The services for the fees disclosed under this category include consultation regarding our correspondence with the SEC and other accounting consulting.

Tax Fees

This category consists of professional services rendered by our independent registered public accounting firm for tax compliance and tax advice. The services for the fees disclosed under this category include tax return preparation and technical tax advice.

All Other Fees

This category consists of fees for other miscellaneous items.

Our Board of Directors has adopted a procedure for pre-approval of all fees charged by our independent registered public accounting firm. Under the procedure, the Board approves the engagement letter with respect to audit, tax and review services. Other fees are subject to pre-approval by the Board, or, in the period between meetings, by a designated member of the Board. Any such approval by the designated member is disclosed to the entire Board at the next meeting. Any services and fees of BDO are also approved pursuant to the pre-approval policy of the Company.

Pre-Approval Policy

We have recently constituted our audit committee. Provision of the above-mentioned services was approved by our board of directors in the absence of an audit committee at that point in time.

PART IV

Item 15. Exhibits and Financial Statement Schedules.

Financial Statement Schedules are omitted because the information required is not applicable or the required information is shown in the financial statements or notes thereto.

Item 16. Form 10-K Summary.

None.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated:

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Shareholders and Board of Directors

SS Innovations International Inc.

405, 3^rd Floor, iLabs Info Technology Centre

Udyog Vihar, Phase III

Gurugram, Haryana 122016, India

Substantial Doubt about the Company’s Ability to Continue as a Going Concern

The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 1 to the consolidated financial statements, the Company has suffered recurring losses from operations and has negative cash flows from operating activities during the year ended December 31, 2024. The Company is dependent on further funding to meet its obligations to sustain its operations. These conditions raise substantial doubt about the Company’s ability to continue as a going concern. Management’s plans in regard to these matters are also described in Note 1 to the consolidated financial statements. These consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of the critical audit matter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Determination of Standalone Selling Price

As described in Note 2 to the consolidated financial statements, during the year ended December 31, 2024, the Company recognized revenue for system sale arrangements of approximately $19.46 million. The Company’s system sale arrangements could include a combination of the following performance obligations: system(s); system accessories or instruments and extended warranty. For multiple-element arrangements, revenue is allocated to each distinct performance obligation based on its relative standalone selling price (“SSP”). SSP are based on observable prices at which the Company separately sells the products or services. If a SSP is not directly observable, then management estimates the SSP considering market conditions and entity-specific factors including historical pricing data, features and functionality of the products and services and industry data.

We identified the determination of the SSP of distinct performance obligations as a critical audit matter. The determination of SSP requires management’s significant judgments and assumptions. Auditing management’s significant judgments and assumptions involved especially challenging and subjective auditor judgment due to the nature and extent of audit effort required to address these matters.

The primary procedures we performed to address this critical audit matter included:

(Signed BDO India, LLP)

We have served as the Company's auditor since 2024.

Gurugram, India

April 15, 2025

SS INNOVATIONS INTERNATIONAL, INC.

CONSOLIDATED BALANCE SHEETS