SAFE HARBOR STATEMENT AND RISK FACTOR SUMMARY

Safe Harbor Statement

This Annual Report on Form 10-K (the "Annual Report") for the year ended December 31, 2024 contains “forward-looking statements" within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Any statements contained herein that are not of historical facts may be deemed to be forward-looking statements. In some cases, you can identify these statements by words such as such as “anticipates,” “believes,” “plans,” “expects,” “projects,” “future,” “intends,” “may,” “should,” “could,” “estimates,” “predicts,” “potential,” “continue,” “guidance,” and other similar expressions that are predictions of or indicate future events and future trends. These forward-looking statements are based on current expectations, estimates, forecasts, and projections about our business and the industry in which we operate and management's beliefs and assumptions and are not guarantees of future performance or developments and involve known and unknown risks, uncertainties, and other factors that are in some cases beyond our control. As a result, any or all of our forward-looking statements in this Annual Report may turn out to be inaccurate.

The factors which we currently believe could have a material adverse effect on our business operations and financial performance and condition include, but are not limited to, those risks and uncertainties that are detailed in the “Risk Factor Summary” below and under Item 1A. of Part I of this Annual Report. You are urged to consider these factors carefully in evaluating the forward-looking statements and are cautioned not to place undue reliance on these statements. The forward-looking statements are based on information available to us as of the filing date of this Annual Report. Unless required by law, we do not intend to publicly update or revise any forward-looking statements to reflect new information or future events or otherwise. You should, however, review the factors and risks we describe in the reports we will file from time to time with the Securities and Exchange Commission (the "SEC"), after the date of this Annual Report.

This Annual Report also contains estimates, projections and other information concerning our industry, our business, and the markets in which we compete, including data regarding the estimated size of these markets. Information that is based on estimates, forecasts, projections, market research or similar methodologies is inherently subject to uncertainties and actual events or circumstances may differ materially from events and circumstances reflected in this information. Unless otherwise expressly stated, we obtained this industry, business, market and other data from reports, research surveys, studies and similar data prepared by market research firms and other third parties, industry, medical and general publications, government data and similar sources.

Market, Industry and Other Data

This Annual Report contains estimates, projections and other information concerning our industry, our business, and the markets for our products and services. Information that is based on estimates, forecasts, projections, market research or similar methodologies is inherently subject to uncertainties, and actual events or circumstances may differ materially from events and circumstances that are assumed in this information. Unless otherwise expressly stated, we obtained this industry, business, market and other data from our own internal estimates and research as well as from reports, research surveys, studies and similar data prepared by market research firms and other third parties, industry, medical and general publications, government data, and similar sources.

Risk Factor Summary

Our business is subject to a number of risks, a summary of which is set forth below. These risks are discussed more fully in Part I, Item 1A. Risk Factors.

PART I

Overview

Venus Concept Inc. (referred to herein, together with its subsidiaries unless the context otherwise denotes, as the “Company,” “Venus Concept,” “us,” “our,” or “we”) is an innovative global medical technology company that develops, commercializes and delivers minimally invasive and non-invasive medical aesthetic and hair restoration technologies and related services. Our systems have been designed on cost-effective, proprietary and flexible platforms that enable us to expand beyond the aesthetic industry’s traditional markets of dermatology and plastic surgery, and into non-traditional markets, including family medicine and general practitioners and aesthetic medical spas. In the years ended December 31, 2024 and 2023, respectively, a substantial majority of our systems delivered in North America were in non-traditional markets.

We have had recurring net operating losses and negative cash flows from operations. As of December 31, 2024 and December 31, 2023, we had an accumulated deficit of $308.9 million and $261.9 million, respectively. Until we generate revenue at a level to support our cost structure, we expect to continue to incur substantial operating losses and negative cash flows from operations. In order to continue our operations, we must achieve profitability and/or obtain additional equity investment or debt financing. Until we achieve profitability, we plan to fund our operations and capital expenditures with cash on hand, borrowings and issuances of capital stock. As of December 31, 2024 and December 31, 2023, we had cash and cash equivalents of $4.3 million and $5.4 million, respectively. 

The global economy, including the financial and credit markets, has recently experienced extreme volatility and disruptions, including increases to inflation rates, rising interest rates, global tariff threats, foreign currency impacts, declines in consumer confidence, increasing tariff threats, and declines in economic growth. All these factors point to uncertainty about economic stability, and the severity and duration of these conditions on our business cannot be predicted.

Venus Viva®, Venus Viva® MD, Venus Legacy®, Venus Concept®, Venus Versa®, Venus Fiore®, Venus Freedom™, Venus Bliss™, Venus Bliss Max™, NeoGraft®, Venus Glow™, ARTAS®, ARTAS iX®, and AI.ME™, are trademarks of the Company and its subsidiaries. Our logo and other trade names, trademarks and service marks appearing in this document are our property. Other trade names, trademarks and service marks appearing in this document are the property of their respective owners. Solely for convenience, our trademarks and trade names referred to in this document appear without the TM or the ® symbol, but those references are not intended to indicate, in any way, that we will not assert, to the fullest extent under applicable law, our rights, or the rights of the applicable licensor to these trademarks and trade names.

Products and Services

We derive revenue from the sale of products and services. Product revenue includes revenue from the following:

Service revenue includes revenue derived from our extended warranty service contracts provided to our existing customers.

Systems are sold through traditional sales contracts, through our internal financing programs and through distributors. In the third quarter of 2022 we commenced an initiative to reduce our reliance on system sales sold under subscription agreements in the United States. This strategic shift is designed to improve cash generation and reduce our exposure to defaults and increased bad debt expense given the increasingly challenging economic environment caused by the coexistence of high inflation and high interest rates.

We generate revenue from traditional system sales and from sales under our internal financing programs, which are available to customers in North America and select international markets. Approximately 26% of our aesthetic system revenues were derived from our internal financing programs in the year ended December 31, 2024. We currently do not offer the ARTAS iX system under our internal financing programs.

In January 2024, the Company launched its new Venus Prime program which is a structured in-house financing program replacing its legacy subscription program for customers in North America. Under our Venus Prime program, select customers can qualify for competitive financing rates and continue to benefit from the payment flexibility afforded by our previous subscription financing program when purchasing our aesthetic medical devices, as well as a seamless technology upgrade program made available to our customers in years 2 and 3 of ownership.

Like our legacy subscription model, Venus Prime includes an up-front fee and a monthly payment schedule, typically over a period of 36 months, with approximately 40% to 45% of total contract payments collected in the first year. To ensure that each monthly payment is made on time and that the customer’s system is serviced in accordance with the terms of the warranty, every product purchased under Venus Prime requires a monthly activation code, which we provide to the customer upon receipt of the monthly payment. These recurring monthly payments provide our customers with enhanced financial transparency and predictability. This structure can provide greater flexibility than traditional equipment leases secured through financing companies. We work closely with our customers to provide business recommendations that improve the quality-of-service outcomes, build patient traffic and improve financial returns for the customer’s business.

We have developed and received regulatory clearance for twelve novel aesthetic technology platforms, including our ARTAS and NeoGraft systems. We believe our ARTAS and NeoGraft systems are complementary and give us a hair restoration product offering that can serve a broad segment of the market. Our medical aesthetic technology platforms have received regulatory clearance for a variety of indications, including treatment of facial wrinkles in certain skin types, temporary reduction of appearance of cellulite, non-invasive fat reduction (lipolysis) in the abdomen and flanks for certain body types and relief of minor muscle aches and pains in jurisdictions around the world. In addition, our technology pipeline is heavily focused on improving and enhancing our current technologies, products, and services and the development of robotically assisted minimally invasive solutions for aesthetic procedures that are primarily treated by surgical intervention, including the AI.ME platform for which we received FDA 510(k) clearance for fractional skin resurfacing in December 2022.

In the United States, we have obtained 510(k) clearance from the FDA for our Venus Viva, Venus Viva MD, Venus Legacy, Venus Versa, Venus Versa Pro, Venus Velocity, Venus Bliss, Venus Bliss Max, Venus Epileve, Venus Fiore, ARTAS, ARTAS iX and AI.ME systems. Outside the United States, we market our technologies in over 60 countries across Europe, the Middle East, Africa, Asia-Pacific and Latin America. Because each country has its own regulatory scheme and clearance process, not every device is cleared or authorized for the same indications in each market in which a particular system is marketed.

As of December 31, 2024, we operated directly in 12 international markets through our 10 direct offices in the United States, Canada, Japan, Mexico, Spain, Germany, Australia, China, Hong Kong, and Israel. 

Our revenues for the year ended December 31, 2024, and 2023 were $64.8 million and $76.4 million, respectively. We had a net loss attributable to Venus Concept of $47.0 million and $37.2 million for the year ended December 31, 2024, and 2023, respectively. We had an Adjusted EBITDA loss of $21.2 million and $20.3 million for the year ended December 31, 2024, and 2023, respectively. 

Market Overview

Aesthetic Procedures

The market for aesthetic procedures is large, growing, global in scale, and comprised of both surgical and non-surgical procedures. The International Society of Aesthetic Plastic Surgery reported approximately 35 million cosmetic procedures worldwide in 2023. Total cosmetic procedures worldwide in 2023 was comprised of approximately 15.8 million surgical cosmetic procedures and approximately 19.2 million non-surgical cosmetic procedures. Total non-surgical procedures worldwide in 2023 included approximately 14.8 million injectable procedures – primarily neurotoxin and hyaluronic acid fillers – with the remaining 4.4 million non-surgical, non-injectable procedures worldwide in 2023 representing annual addressable procedure opportunity for our minimally invasive and non-invasive medical aesthetic technologies.

  
Hair Restoration Procedures

According to the “2022 Practice Census Results Report” from the International Society of Hair Restoration (“ISHRS”), an estimated 703,183 patients worldwide had a surgical hair restoration procedure in 2021 and estimated the global market for surgical hair restoration treatments totaled $4.5 billion in 2021.

We believe several factors are contributing to the growth in the aesthetic and hair restoration markets, including:

Aesthetic Solutions

Traditional Aesthetic Treatment Options and Their Limitations

We believe that several limitations have restricted the growth of traditional aesthetic technologies and that patients who do not require significant skin tightening, cellulite reduction, circumferential reduction or body contouring will explore non-invasive alternatives to minimize the pain, expense, downtime, and surgical risks associated with current invasive procedures. Most existing non-invasive procedures are based on various forms of directed energy treatments, such as Radiofrequency (“RF”), Intense Pulsed Light (“IPL”), lasers using various wavelengths, shockwave therapy or ultrasound.

Most traditional aesthetic technologies present several limitations, including surgical risks, potentially painful and medication-dependent surgical recovery, pain and discomfort, potentially undesired results. In addition, traditional aesthetic technologies are limited in efficacy by the relative skill and technique of the operator, and patient access to invasive treatments is often limited by cost. 

Our Aesthetic Technology Solutions

We have designed a suite of medical aesthetic systems that use our proprietary multipolar pulsed technology (“(MP)²”) technology to address the limitations of existing medical aesthetic technologies and procedures. Our systems have the following characteristics:

Our Competitive Advantages for the Aesthetic Market

Competitive Advantages for Our Customers in the Aesthetic Market

Hair Restoration Solutions

The treatments for hair loss can broadly be divided between non-surgical options and surgical procedures.

Non-Surgical Options

Traditional non-surgical options for hair loss include prescription therapeutics and non-prescription remedies. In the United States, the FDA has authorized two prescription therapeutics for hair loss: Rogaine which is applied topically, and Propecia, a pharmaceutical ingested in pill form. Both Rogaine and Propecia have several drawbacks, including limited efficacy in some individuals, potential side effects and the need for strict patient compliance for the treatment to have meaningful effect.

Surgical Procedures

Surgical procedures to address hair loss, specifically follicular unit transplantation (“FUT Strip Surgery”) and FUE, continue to evolve and become more popular. FUE is significantly less invasive than FUT Strip Surgery, which requires the physician to surgically remove a large strip of the patient’s scalp and implant individual hair follicles from the strip into the patient’s scalp. This procedure results in a linear scar at the donor area. In a FUE procedure, the physician or technician removes individual hair follicles from the patient’s scalp without removing a strip of tissue. Because a strip of the patient’s scalp is not removed, a FUE procedure avoids a long linear scar and reduces the post-operative pain and numbness associated with strip surgery. FUE can be performed with manual hand-held punches ("Manual FUE"), automated hand-held devices (e.g., NeoGraft) or robotically with the ARTAS System.

Limitation of Traditional Hair Loss Treatment Options

While FUT Strip Surgery and Manual FUE can provide significant, long-term results in restoring hair, there are several limitations associated with these procedures, including the demanding training and major investment of time required for a physician or technician to become proficient, the labor intensive nature of the procedures, the ability of physician or technician to effective create sites for hair follicle implantation, and the risk of inconsistence of physician or technician performance.

Our Hair Loss Treatment Solutions

The ARTAS Solution

We believe the ARTAS System addresses many of the shortcomings of other hair restoration procedures. The ARTAS System is capable of robotically assisting a physician through many of the most challenging steps of the hair restoration process, including the dissection of hair follicles, site planning and recipient site making. We believe, with this assistance, the ARTAS System can help shorten the often-long learning curve for both physicians and technicians to become proficient in performing hair restoration procedures. In addition, we believe that by assisting the physician and technicians with many of the repetitive tasks associated with the hair restoration procedures, the ARTAS System can make hair restoration procedures less labor intensive and can reduce operator fatigue, thereby reducing inconsistent results. Further, we believe the ARTAS System’s site making functionality, which includes an enhanced imaging system and sophisticated algorithms, helps physicians avoid damaging existing follicles and enables them to create a more natural, aesthetically pleasing outcome for the patient. In March 2018, we received 510(k) clearance from the FDA to expand the ARTAS technology to include implantation of harvested hair follicles into our ARTAS iX System for sale in the United States. As of December 1, 2022, the ARTAS iX conforms to the European Union’s (“EU”) “Low Voltage Directive” which allows us to affix the CE Mark and market the ARTAS iX system in the EU.

We strategically market the ARTAS System to hair restoration surgeons, dermatologists, plastic surgeons and aesthetic physicians. We believe we can reach our target physician customers effectively through focused marketing efforts. These efforts include participation in trade shows, scientific meetings, educational symposiums, webinars, online advertising and other activities. For physicians who purchase the ARTAS System, we provide comprehensive clinical training and practice-based marketing support. For example, we believe we help our physician customers increase the number of procedures performed by assigning a business development manager (“BDM”) to aid in building the physician-customer’s hair restoration practice. Support from a BDM includes assistance with recruitment, consultation, and conversion of patients. Additionally, BDMs deploy patient marketing materials, assist with social media and digital marketing strategies, and provide other marketing and sales support.

Advantages of the ARTAS Procedure

Patient Value. We believe the ARTAS System significantly improves the patient experience and outcome in hair transplantation procedures in the following ways:

Physician Value. We believe the ARTAS System provides physicians with compelling economic benefits and enables physicians to achieve consistent reproducible results. As a result, we believe the ARTAS procedure also offers an attractive addition to existing dermatology, plastic surgery or aesthetics practices whether they do or do not currently provide hair restoration procedures in the following ways:

Clinically-Established Results. Four peer-reviewed clinical publications have demonstrated the quality and consistency of grafts produced by the ARTAS System. One published study indicated average damage rates for the hair follicles, or transection rates, with the ARTAS System were as low as 6.6%, with a second study documenting average transection rates as low as 4.9% in a separate population of patients. The third study documented that the ARTAS System can be programmed by the physician to select follicular units with larger groupings of hairs while skipping single hair grafts, which allows physicians to choose particular follicular units depending on the hair density they are trying to achieve, providing a clinical benefit as measured by the increase in hairs per harvest of 17% and as measured by the increase in hairs per graft of 11.4%. Results were statistically significant with a p-value less than 0.01. This study also demonstrates the ability of robotic follicular unit graft selection to increase the number of hairs a physician can extract for each incision made in the donor area. The fourth study demonstrated that FUE cases larger than 2,500 grafts, or mega-sessions, are possible using the ARTAS System. These peer-reviewed publications demonstrate the reproducibility and consistency of dissection results from the ARTAS System in a diverse group of patients, even as the system is used by different clinicians. To our knowledge, there are no other peer-reviewed clinical publications that demonstrate the reproducibility of results utilizing other products in FUE or strip surgery procedures. We continue to encourage scientific research in the study of hair restoration to improve our technology, solutions, enhance understanding of our industry and educate physicians on the capabilities of the ARTAS System.

The NeoGraft Solution

We believe that NeoGraft offers a technology solution that complements our robotic hair restoration system and provides an alternative to FUT Strip Surgery and Manual FUE procedures for our customers and their patients.

Patient Value

Physician Value

Our Strategy

Our goal is to become a leading global provider of minimally invasive and non-invasive medical aesthetic and hair restoration technologies and their complimentary products. To achieve this goal, we intend to:

Our Aesthetic Technologies

We use a variety of technologies that allow us to expand into non-traditional physician markets. One differentiating technology is our proprietary (MP)² technology. Our (MP)² technology is applicable to a wide range of non-invasive skin tightening, wrinkle reduction, body contouring, cellulite, and fat reduction, which have been cleared in the United States, Canada, and Europe. We also currently have solutions based on other technologies such as fractional ablative RF, IPL and laser technologies, affording a broader set of solution options to address key markets for hair removal, and vascular pigmented lesions, circumference reduction and fat reduction (lipolysis). As part of our strategy, our Venus Velocity, Venus Viva, Venus Viva MD, Venus Fiore, Venus Bliss, Venus Bliss Max, Venus Epileve, ARTAS and NeoGraft systems come with integrated internet of things capabilities.

Our (MP)² Proprietary Technology

Our proprietary (MP)² technology employs both PEMF and multipolar RF energy in a synergistic manner. (MP)² is noninvasive and because (MP)² disperses heat equally across the treatment area, it does not produce potentially painful localized heat spikes, and unlike other devices employing RF, (MP)² does not require local cooling during treatment.

PEMFs energy is created by running short pulses of electrical current through metal coils, which results in the formation of electromagnetic fields. Electromagnetic fields, in turn, influence the behavior of charged particles, including various biomolecules, within the range of the electromagnetic field to cause one or more desired effects at the cellular level. The non-thermal impact of PEMF therapy is used for aesthetic application requiring enhanced collagen synthesis, for treatment of wounds, and in the management of postsurgical pain and edema.

RF energy, on the other hand, delivers radiofrequency energy that manifests itself as heat within various layers of the skin. The heat generated in the tissue by application of RF energy directly affects fibroblasts, extra cellular matrix and fat cells, thereby triggering natural wound healing processes of the skin and resulting in synthesis of new collagen and elastin fibers. In addition, under predetermined conditions, the heat causes contraction of collagen fibers and lipolysis. In our (MP)² technology, we employ a multipolar matrix of RF circuits to produce heat, which is distributed evenly across the treatment area and volume in a proprietary pattern, which results in the quick and uniform heating of the skin layers without overheating any particular area of the skin.

Elements of (MP)² Technology

 

Benefits of (MP)² Technology

Our proprietary (MP)² technology enables medical and aesthetic practitioners to offer a wide range of non-invasive skin tightening and body contouring solutions with a technology that is cleared for various indications by the FDA, Health Canada and the EU (CE Mark). Additional benefits of using our (MP)² technology include: 

Our Additional Key Technologies

In addition to our core (MP)² technology, we have technologies that use fractional RF (delivery of ablation and coagulation to pre-determined fractions of the skin), IPL and laser technologies that allow us to address key markets for skin resurfacing, wrinkle reduction, body contouring, noninvasive lipolysis and circumference reduction, hair removal, acne treatment and treatment of vascular and pigmented lesions. In offering these solutions in the markets where we have marketing clearances or approvals, our goal is to provide improved technologies that are safe and effective for their intended uses and economically viable for our customers.

Fractional Ablative RF

Fractional ablative/coagulative techniques improve the appearance of skin surfaces by micro-injuring the skin in a fractional manner to trigger a healing response in the treated area. This both tightens the skin and elicits collagen formation, thus rejuvenating the skin surface. Because our fractional RF technology does not use lasers or other light technologies, which are skin color dependent, fractional RF can be used on patients of all skin tones. Fractional RF technology has been incorporated into our Venus Viva applicator, supported by our Venus Viva, Venus Viva MD and Venus Versa systems.

Intense Pulsed Light

Our IPL devices employ non-laser high intensity light sources as part of a high-output flash lamp to produce a broad wavelength of non-coherent light, usually in the 400 to 1200 nm range, that may be further filtered to narrower bands per specific absorption coefficients of predetermined chromophore targets and may be applied to remove unwanted hair as well as vascular and pigmented lesions.

We have incorporated IPL technology into our Venus Versa system to expand that treatment offering and to build a modular, upgradable platform that affords a comprehensive solution for common aesthetic treatments. Specifically, the IPL capability permits users of the Venus Versa systems to offer their patients the service options of removing unwanted hair, treating acne vulgaris, and treating vascular and pigmented dermal lesions. 

Diode Lasers

Diode laser technology is a recognized technology for hair removal and lipolysis. The Venus Velocity and Venus Epileve systems achieve hair removal, permanent hair reduction and treatment of ingrown hair using the diode laser. Both devices employ the laser energy to the treatment area through a chilled sapphire light guide that conductively cools the skin surface simultaneously with the delivery of laser energy that is absorbed in the hair follicle pigment, thereby maintaining a lower temperature in the epidermis to enhance the comfort of the procedure and avoid potential epidermal damage while destroying the hair for hair removal. The Venus Velocity and the Venus Epileve systems allow us to expand our offering in the hair reduction market, which is one of the most popular non-invasive energy-based aesthetic procedures in the United States.

Our laser technology is also incorporated into our Venus Bliss and Venus Bliss Max devices. The diode laser system is intended for non-invasive lipolysis of the abdomen and flanks in individuals with a Body Mass Index of 30 or less. The 1064 nm laser emission performs hyperthermic treatment of the subcutaneous tissue layers and generates an injury to adipocytes (fat cells) through direct heating. The disrupted fat cells and other cellular debris are then removed through the body naturally.

Electrical Muscle Stimulation (EMS)

Electrical Muscular Stimulation (“EMS”) employs electrical pulses of predetermined frequencies, durations, and intensities for elicitation of healthy muscle contraction. EMS employs its cycled stimuli of muscles’ warm up contraction/relaxation of the treated area via two electrodes. We have incorporated EMS technology into Bliss Max and our upcoming Venus Nova device to create comprehensive multi-treatment body solutions.

Micro-Coring

Micro-coring employs a mechanical rotating needle assembly for fractional removal of portions of epidermal and dermal layers of the skin. The sub-millimetric excised skin columns are evacuated from the skin using a vacuum and the triggered demarcated wound healing process results in fractional skin resurfacing through the mechanisms of re-epithelization and deposition of newly synthesized collagen. The micro-coring procedure has been initially used in the ARTAS device for harvesting and implantation of hair follicles. In skin treatment, micro-coring is used by our robotic AI.ME device for fractional skin resurfacing.

Our Robotic Technology

We believe our robotic technology has improved multiple phases of the hair transplantation procedure, which include harvesting, recipient site making and implantation.

Harvesting

During the harvesting phase of an ARTAS hair restoration procedure, the robotic arm and integrated vision system work in tandem to identify the optimal hair follicles to be used in the procedure. The ARTAS vision system uses proprietary algorithms to identify individual hair follicles, growth angle, density, thickness, length and follicle grouping and to determine which grafts to dissect and the optimal order in which they should be dissected. The algorithms recalculate 60 times per second, accommodating patient movement, to provide the physician with accurate up-to-date information during the course of the procedure. We believe these assessments directly correlate to the quality of the outcome, the state of the donor area and the potential viability for subsequent harvesting for future transplantation procedures.

Once optimal hair follicles for transplant are identified by the ARTAS vison system, these follicles are dissected using a sharp needle to score the epidermis and a punch, coaxial with the needle, to separate the graft from the surrounding tissue. In the final step of the harvesting phase, the grafts are removed by the physician or the technician, cleaned, inspected, and prepared for implantation. During the procedure, the physician can customize the dissection incisions by choosing a needle and punch that will produce 0.8mm, 0.9mm or 1.0mm incisions.

The needle travels at speeds that produce targeted precision and a cleanly scored incision. In a clinical setting, the ARTAS System has been shown to move from graft to graft at a rate of approximately one to three seconds, thereby enabling the ARTAS System to dissect a graft every two to five seconds, or approximately 720 to over 1,800 grafts per hour. 

Recipient Site Making 

Prior to the ARTAS System, creating sites to receive harvested grafts was performed manually using a hand-held tool or needle to create hundreds or thousands of tiny incisions in the scalp. This is a critical step as it creates the hair pattern in which the harvested grafts will grow.

The ARTAS System site making functionality incorporates artificial intelligence and robotics precision to strategically make surgical incision sites for implanting hair follicles, while identifying and avoiding injuring healthy follicles in proximity of the implantation sites. This allows the patient’s hair to look more natural and prevents damaging existing healthy hair in the transplant area which we believe results in patients with more hair than if the sites were created manually.

Robotic recipient site making is performed by the physician, who develops the ARTAS System treatment plan, or map, identifying where to make the incisions on the patient’s scalp. The treatment plan is prepared using three-dimension modeling software that takes a picture of the patient’s recipient area and generates a three-dimensional map that is utilized by the ARTAS System. With entry angle accuracy, consistency and precise depth control, the ARTAS System creates the recipient sites using a small solid core needle or a blade at a rate of approximately 2,500 to 3,000 sites per hour, which is significantly faster than the approximately 1,500 sites per hour achieved manually.

Implantation

Customers utilizing an ARTAS iX System can utilize the robotic functionality of the system to assist in implanting the dissected follicles. We believe this robotic implantation functionality will help further shorten the learning curve, improve the consistency and reproducibility of results by protecting permanent hair, reduce inconsistencies associated with manual implantation, potentially reduce the amount of time each graft spends outside of the scalp and decrease the overall time required for implantation.

Our Products

Our product portfolio includes nine energy-based systems that provide solutions for various non-invasive aesthetic applications using Venus Concept’s (MP)² technology, as well as the VariPulse, and/or fractional ablative RF, IPL, or laser technologies. We offer two hair restoration solutions, NeoGraft and ARTAS, as well as the newest addition to our portfolio, our AI.ME next generation robotic platform for fractional skin resurfacing.

Product name	Technology	Regulatory Clearance
Venus Legacy	Venus Legacy combines (MP)2 with Venus Concept’s VariPulse technology, which is a software controlled vacuum application, delivering alternating negative and positive pressure to the tissue in three predefined programs, to achieve lymphatic drainage, and ease applicator movement as vacuum is applied, and real-time thermal feedback to act as a workstation, providing homogeneous heating to multiple tissue depths while allowing for adjustable pulsed suction.	United States • The Venus Legacy BX is a noninvasive device intended for use in dermatological and general surgical procedures for females for the noninvasive treatment of moderate to severe facial wrinkles and rhytides in Fitzpatrick Skin Types I-IV. • The Venus Legacy CX using the LB2 and LF2 applicators is intended for the treatment of the following medical conditions for delivery of non-thermal RF combined with massage and magnetic field pulses: relief of minor muscle aches and pain; relief of muscle spasm; temporary improvement of local blood circulation; and temporary reduction in the appearance of cellulite.   Canada Temporary increase of skin tightening, temporary circumferential reduction, temporary cellulite reduction, temporary and wrinkle reduction.   EU Increase of skin tightening, temporary circumferential reduction, cellulite reduction and wrinkle reduction.

Product Name	Technology	Regulatory Clearance
Venus Versa     Venus Versa Pro	Venus Versa and Versa Pro are versatile systems based on a multi-application approach. It is a modular and upgradable platform that offers the most in-demand aesthetic treatments by supporting 10 optional applicators which utilize Venus Concept’s (MP)2, and IPL and NanoFractional RF technologies. Designed as an open platform, the Venus Versa and Versa Pro can be configured to best suit a practice’s needs with the ability to add additional applications as the practice grows or changes. Depending on the applicator, or the applicator’s sequence of use, the platform can provide multiple aesthetic solutions.	United States, EU and Canada The Venus Versa and Versa Pro* systems are multi-application devices intended for use in aesthetic and cosmetic procedures. The SR515 and SR580 IPL applicators are indicated for treatment of benign pigmented epidermal and cutaneous lesions including, hyperpigmentation, melasma, ephelides (freckles), lentigines, nevi, cafe-au-lait macules, benign cutaneous vascular lesions including port wine stains, hemangiomas, facial, truncal and leg telangiectasias, rosacea, angiomas and spider angiomas, poikiloderma of civatte, leg veins and venous malformations.   The HR650, HR690, HR650XL and HR690XL IPL applicators are indicated for the removal of unwanted hair and to effect stable long-term or permanent hair reduction for Skin Types I-IV. Permanent hair reduction is defined as the long-term stable reduction in the number of hairs re-growing when measured at 6, 9, and 12 months after the completion of a treatment regimen.   The ACDUAL applicator is intended to be used for the treatment of acne vulgaris.   The Venus Versa Viva applicator with 160 pin RF tip is intended for dermatological procedures requiring ablation and resurfacing of the skin. The Versa Pro system adds the Viva MD applicator for use with an 80 pin RF tip for added dermatological procedures.   The Diamondpolar and Octipolar applicators (United States only) are noninvasive devices intended for use in dermatologic and general surgery procedures for females for the noninvasive treatment of moderate to severe facial wrinkles and rhytides in Fitzpatrick skin types I-IV.   The Octipolar applicator (EU and Canada only), is designed for use in temporary body contouring via skin tightening, circumferential reduction, and cellulite reduction.   *Venus Versa Pro is cleared in the US only.

Venus Viva and Venus Viva MD

Venus Viva is an advanced, portable, fractional RF system for dermatological procedures requiring ablation and resurfacing of the skin. Venus Viva uses (Nano)Fractional RF and Smart Scan technologies. The combination of technologies allows ablation/coagulation heated zone density control and pattern generation via a proprietary tip. The energy is delivered through 160 (Viva) or 80 (Viva MD) pins per tip into the treated skin and maintains the surrounding tissue intact and healthy to support the healing process.

United States, EU and Canada The Venus Viva SR is intended for dermatological procedures requiring ablation and resurfacing of the skin.   EU and Canada Using the Diamondpolar applicator for treatment of moderate to severe wrinkles and rhytides in Fitzpatrick skin types I-IV.

Product Name	Technology	Regulatory Clearance
Venus Velocity	The Venus Velocity system uses pulsed laser energy of 800 mm that is absorbed by a chromophore or pigmented target (e.g., melanin in hair follicles) that has high optical absorption at the selected laser wavelength than the surrounding tissue. Different chromophores are targeted for different clinical indications. The selective absorption of different wavelengths leads to localized heating and thermal denaturation and destruction of the anatomic hair follicle target with minimal effect on surrounding tissues. The chilled sapphire light guide conductively cools the skin simultaneously with the delivery of laser energy, thereby maintaining low temperature in the epidermis to enhance the comfort of the procedure and avoid potential epidermal damage.	United States, EU and Canada The Venus Velocity is intended for all Fitzpatrick skin types, including tanned skin, for use in dermatology, general and plastic surgery applications for: • Hair removal; • Permanent hair reduction (defined as the long-term stable reduction in the number of hairs regrowing when measured at 6, 9, and 12 months after the completion of a treatment regimen); and • Treatment of pseudofolliculitis barbae.

Venus Fiore

Venus Fiore incorporates Venus Concept’s (MP)2 technology, supporting three different applicators. Venus Fiore has a desktop configuration and is portable and compact. It incorporates ATC technology, allowing the operator to choose a target temperature within the therapeutic range and have the system adjust the output power accordingly, to automatically maintain the desired temperature. The applicator incorporates three pairs of electrodes, each pair of electrodes accompanied by a temperature sensor, allowing the operator to control the temperature in the distal, middle and proximal thirds of the applicator independently. Venus Fiore has received clearance in United States, Canada, the EU and Israel.

United States The Venus Fiore device (K211461) is intended for the treatment of the following medical conditions; using the Pearl, Diamond and Slim applicators for delivery of non-thermal RF combined with massage and magnetic field pulses:  • Relief of minor muscle aches and pain, relief of muscle spasm. • Temporary improvement of local blood circulation. • Temporary reduction in the appearance of cellulite.   EU and Canada The Venus Fiore system is intended for the following:  • With the VG applicator – For improvement of symptoms of vaginal laxity and vaginal atrophy.  • With the MP applicator – For dermatological procedures requiring increasing of skin tightening improvement in skin laxity of the Mons Pubis (MP) area. • With the LA applicator – For dermatological procedures for skin tightening improvement in skin laxity of the Labia Majora (LA) area.   Israel Aesthetic and functional treatment of the vagina, labia and mons pubis.

Product Name	Technology	Regulatory Clearance
Venus Bliss	The Venus Bliss device consists of a console (main unit), one RF applicator and four diode laser applicators. The system, via its different applicator types, delivers laser and/or bipolar RF energies, vacuum pressure, and pulsed magnetic fields to the skin and the underlying tissues of the treatment area. Venus Bliss delivers laser energy to the subcutaneous tissue layers via the four diode laser applicators connected to the console. The console utilizes diode laser modules as sources of optical energy and the optical output is fiber-coupled through the applicator to the treatment area so to increase the temperature of the fat resulting in fat breakdown (lipolysis). In addition, the Venus Bliss device through the (MP)2 applicator provides RF treatments combined with emitted magnetic fields and vacuum massaging. The RF heating effect, together with the non-thermal magnetic fields and vacuum, leads to the temporary reduction in the appearance of cellulite, temporary relief of muscle pain and spasm, and improvement of local blood circulation in the subdermal layers.	United States and Canada Using the diode laser system, the Venus Bliss device is intended for non-invasive lipolysis of the abdomen, flanks, back and thighs in individuals with a Body Mass Index (BMI) of 30 or less.   Using the (MP)² applicator (United States only) for delivery of RF energy combined with massage and magnetic field pulses, the Venus Bliss device is intended for the treatment of the following medical conditions: • Relief of minor muscle aches and pain, relief of muscle spasm. • Temporary improvement of local blood circulation. • Temporary reduction in the appearance of cellulite.    Using the (MP2) applicator (EU and Canada only) is intended for:  • Temporary increase of skin tightening.  • Temporary circumferential reduction.  • Temporary cellulite reduction.  • Temporary wrinkle reduction. (Canada only)

Product Name	Technology	Regulatory Clearance
Venus Bliss Max	The Venus Bliss Max device is a computerized system comprised of a system console (main unit), four (4) Diode Laser applicators, one (1) MP2 (RF+ PEMF+ Vacuum) applicator and four (4) FlexMAX (EMS) applicators. The system delivers laser, bipolar RF and biphasic electrical energies, vacuum pressure, and pulsed electromagnetic fields (PEMF) to the skin and the underlying tissues of the treatment area. The device provides individual adjustment of laser power, EMS intensity level, and RF power, in addition to vacuum levels, for each patient. The console of the Venus Bliss Max device contains a power supply unit, Laser, RF, and EMS controllers, (power modules, on main board), a suction module (vacuum), a controller unit (on main board), Laser water cooling system (power module, on main board), a touch- screen user interface and display panel. The applicators are connected to the console via a cable. The RF applicator is comprised of various combinations of RF electrodes, magnetic coils, and vacuum conduits. The Laser applicators are comprised of a light guide, touch sensors and light-emitting diodes. The EMS applicator is comprised of two electrodes and a light indicator.	United States The Venus Bliss Max device is a diode laser system intended for non-invasive lipolysis of the abdomen, flanks, back and thighs in individuals with a Body Mass Index (BMI) of 30 or less. In addition, the Venus Bliss Max device is intended for the treatment of the following medical conditions; using the MP2 applicator for delivery of RF energy combined with massage and magnetic field pulses:  • Relief of minor muscle aches and pain, relief of muscle spasm  • Temporary improvement of local blood circulation  • Temporary reduction in the appearance of cellulite.   In addition, the Venus Bliss Max device using the FlexMAX applicators is intended for muscle conditioning to stimulate healthy muscles. The Venus Bliss Max device using the FlexMAX applicators is not intended to be used in conjunction with therapy or treatment of medical diseases or medical conditions of any kind. The Venus Bliss Max device using the FlexMAX applicators is intended to be operated by a trained professional.

Product Name	Technology	Regulatory Clearance
Venus Glow	Venus Glow consists of a console and applicator. It is used to improve skin appearance using powerful tri-modality treatment combining a rotating tip, a vacuum modality and a jet. Venus Glow deep-cleans pores by removing impurities such as daily dirt and debris, dry or dead skin cells, and excess sebum.	United States (listed as a Class I device by the FDA) Motorized dermabrasion device.   Canada (listed as a Class I device).   EU Not a medical device.
NeoGraft	Venus Concept’s NeoGraft device is an advanced hair restoration technology with an automated FUE and implantation system. The procedure leaves no linear scar and is minimally invasive.	United States (listed as a Class I device by the FDA) Surgical instrument motors and accessories that are intended for use during surgical procedures to provide power to operate various accessories or attachments to cut hard tissue or bone and soft tissue.   Canada (listed as Class I without indication)   EU Hair Transplant device.
Venus Epileve	The Venus Epileve system uses pulsed laser energy of 800 mm that is absorbed by a chromophore or pigmented target (e.g., melanin in hair follicles) while skin surface is being chilled, for different indications of hair removal and permanent hair reduction. Venus Epileve is intended to provide an entry level, affordable solution for non-traditional markets for hair removal of all skin types.	EU and Canada The Venus Epileve is intended for all Fitzpatrick skin types, including tanned skin, for use in dermatology, general and plastic surgery applications for hair removal, permanent hair reduction (defined as the long-term stable reduction in the number of hairs re-growing when measured at 6, 9, and 12 months after the completion of a treatment regimen); and treatment of pseudofolliculitis barbae.

Product Name	Technology	Regulatory Clearance
ARTAS iX	The ARTAS System is comprised of the cart, which includes the robotic arm, integrated vision system, artificial intelligence algorithms and a series of proprietary end effectors employed in an automatic manner. The accessories at the distal end of the robotic arm, such as the automated needle and punch, that interact with the patient’s scalp and hair follicles and perform various clinical functions including hair follicle harvesting and implantation.	United States and Canada Harvesting hair follicles from the scalp in men diagnosed with androgenic alopecia who have black or brown straight hair. The ARTAS System is intended to assist physicians in identifying and extracting hair follicles units from the scalp during hair transplantation, creating recipient sites and implanting the harvested hair follicles.   EU Computer assisted hair follicle harvesting, incision making and implantation system.
AI.ME	The AI.ME System is an interactive, image-guided, computer assisted system consisting of several main subsystems. These include a cart robotic arm, integrated imaging system, vacuum assembly, coring mechanism, punch assembly, and computer. The AI.ME system is a micro coring device controlled by a robot that removes skin by using a disposable punch assembly containing six (6), hollow needle punches inserted into the skin with a fixed maximum penetration depth of 3 mm to remove up to 10% of skin in the treatment area for fractional skin resurfacing.	United States Fractional skin resurfacing.

Products in Development

Our ongoing research and development activities are primarily focused on improving and enhancing our current technologies, products, and services, as well as expanding our current product offering with the introduction of new products for different aesthetic, medical and hair restoration applications. We are currently developing the following products and technologies:

ARTAS iX2

We are working on the next generation ARTAS Hair Restoration system. The iX2 will simulate human hand motion for extracting hair follicles by changing the punch trajectory while in motion with the articulated mechanism and utilizing oscillation along with rotation to improve the ability to capture the entire follicle and reduce transection. The system will also allow the use of Off-The-Shelf punches to allow the physician more flexibility in using punches with which they are familiar.

Venus Nova

We are working on the next generation of the well-established Venus Legacy product line. This device is intended to extend the capabilities of the original Venus Legacy system product line by combining (MP)² and VariPulse technologies with real-time thermal feedback and ATC to provide homogeneous heating to multiple tissue depths while allowing for adjustable pulsed suction to further support deep energy penetration. This will result in enhanced lymphatic drainage and improved circulation stimulation. The device will come with both hand-held and hands-free applicators which will include (MP)² and EMS technologies.

Other Developments

Our research and development efforts also currently include research to expand indications, broaden our offering of system applicators, advance our proprietary (MP)2 technology, add new technologies and indications, develop design improvements and new products, as well as continue to support our harvesting, site making and implantation functions for the ARTAS iX System.

Clinical Developments

We continue to invest in research and development to support our technology, marketing and post-marketing surveillance. We also have a portfolio of over 40 peer-reviewed publications and more than 20 white papers, many of which pertain to indications cleared outside of the United States to educate users in other countries and to study expanded indications in the United States. Authors for several of these publications hold stock options in Venus Concept or were paid consultants for us.

Research has shown that (MP)² technology improves aspects of textural lesions and body contouring. The fractional RF has been shown to improve skin structure, including wrinkles, scars and striae through ablation and resurfacing. IPL technology used in the Venus Versa has shown to be versatile and effective for treating vascular and pigmented lesions, acne and rosacea. Our diode laser technology has been shown to be effective for lipolysis and reduction of fat layer thickness, as well as efficiently effecting hair reduction/removal. Additionally, the Venus Fiore device has demonstrated ability to improve symptoms related to vaginal atrophy.

We have a number of ongoing clinical trials covering both new technologies and the development of expanded indications for existing technology. Clinical trials are conducted frequently to develop new technologies and applications and support existing technologies and applications and their respective enhancements and upgrades.

Sales and Marketing

We market and sell our products and services to the traditional medical aesthetic market including plastic surgeons and dermatologists, as well as to a broad base of non-traditional physician markets, including general and family practitioners and aesthetic medical spas.

Direct Sales

We currently provide our new Venus Prime financing model and traditional sales model, and associated marketing support programs in the United States and Canada. We provide our legacy subscription model and traditional sales model, as well as the associated marketing support programs through our wholly owned subsidiaries in Japan, Mexico, Spain, Germany, Israel, Australia, and China as well as through Venus Concept’s majority-owned subsidiary in Hong Kong.

Direct sales force

In the United States and select international markets, we use our direct sales force to sell our systems and other products and services. As of December 31, 2024, we had a direct sales and marketing team of approximately 86 employees, managed by one Executive Vice President, Global Sales and Marketing, three Vice Presidents of Sales for various international markets and one Vice President of Global Marketing and Product Management. We plan to continue to focus our direct sales efforts in the North America market and continue to evaluate and optimize our use of direct and distributor resources in our international markets.

Distributors

In countries where we do not operate directly, we sell our products through distributors. As of December 31, 2024, we had distribution agreements in over 40 countries. We enter into both exclusive and non-exclusive distribution agreements, which generally provide the distributor with a right to distribute certain of our products within a designated territory. Each agreement sets forth certain minimum quarterly purchase commitments and if the distributor fails to meet its minimum purchase commitments, we have the ability to either convert any exclusive distribution rights to non-exclusive rights during the then-remaining term or terminate the agreement. To provide more comprehensive customer support, these agreements require our distributors to provide after sales service to customers, such as training and technical support, and various marketing activities, such as preparing and executing marketing plans and working with key market leaders in the designated territory to promote the product.

Marketing and Branding Programs

We are focused on, and invest heavily in, direct-to-consumer marketing initiatives to increase awareness of our products and services. We believe our marketing activities are both cost effective and critical in supporting the continued growth and development of our business. As of December 31, 2024, we had a Vice President of Global Marketing and Product Management, with regional marketing support in select countries. We have an internal team of digital marketing, brand, marketing operations and events specialists that support North America and our regional markets.

We implemented business to business and business to customer public relations outreach strategies that incorporates both digital media and top national media channels in the fashion and beauty industries and have a presence on the most popular social media channels, such as Facebook, Twitter, YouTube, Pinterest, LinkedIn and Instagram. We also attend major medical and scientific meetings, as well as trade shows. Since some countries require customized marketing programs, we have hired country-specific marketing managers to ensure that marketing programs are executed successfully in those jurisdictions.

Customer Support

We provide our customers and authorized distributors with customer support through our fully integrated marketing program and strong clinical and technical support teams.

Customer Business Development Program

To support the growth initiatives of our customers, we have built a business development strategy that provides customers with a fully integrated marketing support program with business and marketing tools to grow their practices, improve their financial and business performance, and maximize their return on investment while also providing sales strategies related to our products and ancillary services. Our customer business development program includes the following features:

Technical and Clinical Support

We warranty our products against defects in materials and workmanship under normal use and service for a period of one year, with certain other products carrying a different warranty correlating to the number of uses the product undergoes or based upon the perishability of the product. Once the warranty expires, our customers have the option of purchasing an extended warranty service contract, which is typically for a term of one to three years.

We maintain a technical and clinical support team to field inquiries, troubleshoot product issues, facilitate sales activities and support the commercial activities of our direct offices and international distributors. In the event that an issue arises, our technical support personnel will work with our customers to determine if a technical issue may be resolved over the telephone or requires a service visit. In markets where we do not have our own service engineers, the service and support of our products is managed by our independent distributors. In order to maximize customer “up time,” we proactively deploy replacement systems, modules, and components to strategic hubs worldwide.

Manufacturing and Quality Assurance

We have our own research and development centers in Yokneam, Israel, and San Jose, California and use two ISO-certified contract manufacturers in Karmiel, Israel, and Mazet, France. We assemble the ARTAS System in San Jose, California, while reusable and disposable kits are assembled exclusively for us by NPI Solutions, Inc. (“NPI”) based in Morgan Hill, California.

We work closely with our manufacturers and perform final quality control testing using our own employees stationed in the manufacturing facilities around the world. Having over 85% of the production of our systems in close proximity to our research and development and operations facilities enables us to control the entire process from product development through manufacturing and final testing, and to provide advanced, high-quality systems as well as the flexibility to create customized solutions for our customers. 

Manufacturing facilities that produce medical devices intended for distribution in the United States and internationally are subject to regulation and periodic unannounced inspection by the FDA and other domestic and international regulatory agencies. In the United States, we are required to manufacture our products in compliance with the FDA’s Quality System Regulations (“QSR”), which covers the methods and documentation of the design, testing, control, manufacturing, labeling, quality assurance, packaging, storage, and shipping of our products. In international markets, we are required to obtain and maintain various quality assurance and quality management certifications. We conform with and are in full compliance with ISO:13485:2016, CE (MDD→ MDR) and MDSAP.

We maintain a quality system designed to be compliant with quality system management and QSR and have procedures in place to ensure that all products and materials we purchase conform to our specifications, including evaluation of suppliers, and where required, qualification of the components supplied. We believe that our current facilities are adequate to support our operations.

Intellectual Property

Portfolio

We rely on a combination of patent, copyright, trademark and trade secret laws, and confidentiality and invention assignment agreements to protect our intellectual property rights. As of December 31, 2024, our patent portfolio is comprised of:

As of December 31, 2024, our trademark portfolio included the following trademark registrations, pending trademark applications or common law trademark rights, among others: MP2®, Tribella®, Vero Hair®, NANOFRACTIONAL RF®, Venus Viva®, Venus Legacy®, Venus Concept®, Venus Versa®, Venus Bliss™, Venus Bliss Max™, NeoGraft®, ARTAS®, ARTAS iX®, Aesthetic Intelligence™ and AI.ME™. We continue to file new trademark applications in many countries to protect our current and future products and related slogans.

License Agreement with HSC Development LLC and James A. Harris, MD

In July 2006, we entered into a license agreement (the “HSC License Agreement”) HSC Development LLC ("HSC”), and James A. Harris, M.D., as amended, pursuant to which we received an exclusive, worldwide license to develop, manufacture and commercialize products covered by any of the licensed patent rights or that incorporate the licensed technology in the field of performance of hair removal and implantation, including transplantation, procedures using a computer controlled system in which a needle or other device carried on a mechanized arm is oriented to a follicular unit for extraction of same, or to an implant site for implantation of a follicular unit, or some combination thereof. Under the HSC License Agreement, we developed the ARTAS System to be utilized as a robotic system to assist a physician in performing hair restoration procedures. In consideration for the license, we issued to HSC 25,000 shares of our common stock, prior to the Company’s 1-for-10 and 1-for-15 reverse stock splits, and paid HSC a one-time payment of $25,000. The license grant is perpetual, and the license agreement does not provide a right for HSC or Dr. Harris to terminate the HSC License Agreement. The licensed patents cover, in general, a method and device for the extraction of follicular units from a donor area on a patient. The method includes scoring the outer skin layers with a sharp punch, and then inserting a blunt punch into the incision to separate the hair follicle from the surrounding tissue and fatty layer. The method and device significantly decrease the amount of follicular transection and increase the rate at which follicular units can be extracted. There are other embodiments not herein disclosed. The licensed patents will expire from 2025 through 2030.

Competition

The medical technology and aesthetic product markets are highly competitive and dynamic and are characterized by rapid and substantial technological development and product innovation. Demand for our systems is impacted by the products and procedures offered by our competitors. Certain of our systems also compete against conventional non-energy-based treatments, such as neurotoxins and dermal fillers, chemical peels, and microdermabrasion. In the United States, we compete against companies that have developed minimally invasive and non-invasive medical aesthetic procedures. Outside of the United States, likely due to less stringent regulatory requirements, there are more aesthetic products and procedures available in international markets than are cleared for use in the United States. Sometimes, there are also fewer limitations on the claims our competitors in international markets can make about the effectiveness of their products and the manner in which they can market them. As a result, we may face a greater number of competitors in markets outside of the United States. We also compete generally with medical technology and aesthetic companies, including those offering products and services unrelated to skin treatment. Recently, there has been consolidation in the aesthetic industry leading to companies combining their resources, which increases competition and could result in increased downward pressure on our system prices.

In the surgical hair restoration market, we consider our direct competition to be FUT Strip Surgeries and Manual FUE procedures. Many of our surgical device and equipment competitors have greater capital resources, sales and marketing operations and service infrastructures than we do, as well as longer commercial histories and more extensive relationships with physicians. FUT Strip Surgery and some Manual FUE procedures have a greater penetration into the hair restoration market, due in part to having a longer history in the market. Our indirect competition in the hair restoration market also includes non-surgical treatments for hair loss, such as prescription therapeutics, including Propecia, and non-prescription remedies, such as wigs, hair pieces and spray-on applications.

We believe that our competitors’ systems compete largely based on the following factors:

Government Regulation

The design, development, manufacture, testing and sale of our products are subject to regulation by numerous governmental authorities, including the FDA, and corresponding state and foreign regulatory agencies.

Regulation by the FDA

In the United States, the Federal Food, Drug, and Cosmetic Act (“FDCA”), the FDA regulations and other federal and state statutes and regulations govern, among other things, medical device design and development, preclinical and clinical testing, premarket clearance or approval, registration and listing, manufacturing, labeling, storage, advertising and promotion, sales and distribution, export and import, and post-market surveillance. The FDA enforces the FDCA, and the regulations promulgated pursuant to the FDCA.

Each medical device that we wish to distribute commercially in the United States requires marketing authorization from the FDA prior to distribution unless an exemption applies. The two primary types of FDA marketing authorizations applicable to a device are premarket notification, also called 510(k) clearance, and premarket approval (“PMA”). The type of marketing authorization is generally linked to the classification of the device. The FDA classifies medical devices into one of three classes (Class I, II, or III) based on the degree of risk the FDA determines to be associated with a device and the level of regulatory control deemed necessary to ensure the device’s safety and effectiveness for its intended use(s). Devices requiring fewer controls because they are deemed to pose lower risk are placed in Class I or II. Class III devices are those for which insufficient information exists to assure safety and effectiveness solely through general or special controls and include life-sustaining, life-supporting or implantable devices, devices of substantial importance in preventing impairment of human health, or which present a potential, unreasonable risk of illness or injury.

Most Class I devices and some Class II devices are exempted by regulation from the 510(k) clearance requirement and can be marketed without prior authorization from the FDA. By contrast, devices placed in Class III generally require PMA approval or approval of a de novo reclassification petition prior to commercial marketing. The FDA’s 510(k) clearance process usually takes from three to nine months but can take longer. For products requiring PMA approval, the regulatory process generally takes from one to three years or more, from the time the application is filed with the FDA and involves substantially greater risks and commitment of resources than either the 510(k) clearance or de novo processes.

510(k) Clearance

To obtain 510(k) clearance for a medical device, an applicant must submit a premarket notification to the FDA demonstrating that the device is “substantially equivalent” to a previously cleared 510(k) device or a device that was in commercial distribution before May 28, 1976 for which the FDA has not yet called for PMA approval, commonly known as the “predicate device.” A device is substantially equivalent if, with respect to the predicate device, it has the same intended use and has either (i) the same technological characteristics or (ii) different technological characteristics and the information submitted demonstrates that the device is as safe and effective as a legally marketed device and does not raise different questions of safety or effectiveness. After a device receives 510(k) marketing clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change or modification in its intended use, will require a new 510(k) marketing clearance or, depending on the modification, a de novo classification or PMA approval.

We have made modifications to our products in the past and have determined based on our review of the applicable FDA regulations and guidance that in certain instances new 510(k) clearances or PMA approvals were not required.

PMA Approval

A PMA application must be submitted if the device cannot be cleared through the 510(k) process and is found ineligible for de novo reclassification. PMA applications must be supported by valid scientific evidence, which typically requires extensive data, including technical, preclinical, clinical, and manufacturing data, to demonstrate to the FDA’s satisfaction the safety and effectiveness of the device. A PMA application must also include, among other things: a complete description of the device and its components; a detailed description of the methods, facilities and controls used to manufacture the device; and proposed labeling. Approval of FDA review of an initial PMA application may require several years to complete.

Clinical Trials

Clinical trials are almost always required to support the FDA’s approval of a premarket approval application and are sometimes required for 510(k) clearances. If a device presents a “significant risk,” as defined by the FDA, to human health, the device sponsor may need to file an investigational device exemption (“IDE”) application with the FDA and obtain an IDE approval prior to commencing the human clinical trials. The IDE application must be supported by appropriate data, such as animal and laboratory testing results, showing that it is safe to test the device in humans and that the testing protocol is scientifically sound. The IDE application must be approved in advance by the FDA for a specified number of patients, unless the product is deemed a “non-significant risk” device and eligible for more abbreviated IDE requirements. Clinical trials for a significant risk device may begin once the IDE application is approved by the FDA and the appropriate institutional review boards (“IRB”). Clinical trials are subject to extensive monitoring, recordkeeping and reporting requirements.

Similarly, in Europe a clinical study must be approved by the local ethics committee and in some cases, including studies of high-risk devices, by the ministry of health in the applicable country. In the EU, physico-chemical tests carried out on the medical device may be necessary in order to obtain the CE mark. These tests must be performed by accredited laboratories for Class II b and III medical devices. The reports and tests are required to be filed in a technical file submitted to the notified body for validation of and obtaining the CE mark. Regulation 2017/745 (the "MDR") applicable as of May 2021 in the EU will significantly strengthen the requirements for clinical evaluation (EC). The clinical evaluation for Class II b and Class III medical devices will be based on a critical evaluation of relevant scientific publications, the results of all available clinical investigations as well as the consideration of other medical devices with the same purpose. Regulation 2017/745 notably requires the manufacturer to carry out a post-marketing safety monitoring plan, which includes post-marketing clinical follow-ups (SCAC) in order to update information about the devices marketed throughout its life cycle, and notably any adverse effects.

Post-market Regulation

Any devices that are manufactured or distributed pursuant to clearance or approval by the FDA are subject to pervasive and continuing regulation by the FDA and certain state agencies. After a device is placed on the market, numerous regulatory requirements continue to apply. These include establishment registration and device listing with the FDA, QSR requirements, labeling and marketing regulations, clearance or approval of product modifications, medical device reporting regulations, correction, removal and recall reporting regulations, Unique Device Identifiers compliance, the FDA’s recall authority, and post-market surveillance activities and regulations.

We may be subject to similar foreign laws that may include applicable post-marketing requirements such as safety surveillance. Our manufacturing processes are required to comply with the applicable portions of the QSR, which cover the methods and the facilities and controls for the design, manufacture, testing, production, processes, controls, quality assurance, labeling, packaging, distribution, installation and servicing of finished devices intended for human use. The QSR also requires, among other things, maintenance of a device master file, device history file, and complaint files. As a manufacturer, we are subject to periodic scheduled or unscheduled inspections by the FDA. A failure to maintain compliance with the QSR requirements could result in the shut-down of, or restrictions on, our manufacturing operations and the recall or seizure of products. The FDA has broad regulatory compliance and enforcement powers. If the FDA determines that we failed to comply with applicable regulatory requirements, it can take a variety of compliance or enforcement actions. For additional information on these potential actions and other governmental regulation risks, see Part I, Item 1A “Risk Factors—Risks Related to Government Regulation” included elsewhere in this report.

Fraud and Abuse Regulations

Federal and state governmental agencies subject the healthcare industry to intense regulatory scrutiny, including heightened civil and criminal enforcement efforts. These laws constrain the sales, marketing and other promotional activities of medical device manufacturers by limiting the kinds of financial arrangements they may have with physicians and other potential purchasers of their products. Violations may result in substantial civil penalties, including treble damages, and criminal penalties, including imprisonment, fines and exclusion from participation in federal health care programs. The Federal False Claims Act also contains “whistleblower” or “qui tam” provisions that allow private individuals to bring actions on behalf of the government alleging that the defendant has defrauded the government.

Venus Concept’s products, and treatment using our products, are not reimbursable by Medicare, Medicaid or other federal health care programs, or by commercial insurance. As a result, many federal and state fraud and abuse statutes do not apply to Venus Concept.
 

Compliance with applicable United States and foreign laws and regulations, such as import and export requirements, anti-corruption laws such as the Foreign Corrupt Practices Act and similar worldwide anti-bribery laws, tax laws, foreign exchange controls and cash repatriation restrictions, data privacy and data security requirements, environmental laws, labor laws and anti-competition regulations, increases the costs of doing business in foreign jurisdictions. In some cases, compliance with the laws and regulations of one country could violate the laws and regulations of another country.

Many foreign countries have similar laws relating to healthcare fraud and abuse. Foreign laws and regulations may vary greatly from country to country. Violations of these laws, or allegations of such violations, could result in fines, penalties, or prosecution and have a negative impact on our business, results of operations and reputation.

There has been a recent trend of increased foreign, federal, and state regulation of payments and transfers of value provided to healthcare professionals, such as physicians, and entities. However, certain foreign countries and U.S. states also mandate implementation of commercial compliance programs, impose restrictions on device manufacturer marketing practices and require tracking and reporting of gifts, compensation and other remuneration to healthcare professionals and entities. Violations of these laws, or allegations of such violations, could result in fines, penalties, or prosecution and have a negative impact on our business, results of operations and reputation.

Foreign Government Regulation

The regulatory review process for medical devices varies from country to country, and many countries also impose product standards, packaging requirements, environmental requirements, labeling requirements and import restrictions on devices. Each country has its own tariff regulations, duties, and tax requirements. Failure to comply with applicable foreign regulatory requirements may subject a company to fines, suspension or withdrawal of regulatory approvals, product recalls, seizure of products, operating restrictions, criminal prosecution, or other consequences.

European Economic Area

In the European Economic Area (“EEA”), our devices are required to comply with the Essential Requirements set forth in Annex I to the Council Directive 93/42/EEC concerning medical devices, commonly referred to as the Medical Devices Directive. Compliance with the Medical Devices Directive entitles a manufacturer to affix the CE mark to its medical devices, without which they cannot be commercialized in the EEA. To demonstrate compliance with the Essential Requirements and to obtain the right to affix the CE mark to medical devices, they must undergo a conformity assessment procedure, which varies according to the type of medical device and its classification. Except for low risk medical devices (Class I with no measuring function and which are not sterile), where the manufacturer can issue an EC Declaration of Conformity based on a self-assessment of the conformity of its products with the Essential Requirements, a conformity assessment procedure requires the intervention of a notified body, which is an organization designated by the competent authorities of an EEA country to conduct conformity assessments. The notified body typically audits and examines products’ Technical File and the quality system for the manufacture, design and final inspection of our devices before issuing a CE Certificate of Conformity demonstrating compliance with the relevant Essential Requirements. Following the issuance of this a CE Certificate of Conformity, Venus Concept can draw up an EC Declaration of Conformity and affix the CE mark to the products covered by this CE Certificate of Conformity and the EC Declaration of Conformity. We have successfully completed several notified body audits since our original certification in December 2009. Following these audits, our notified body issued ISO 13485:2016 Certificate and CE Certificates of Conformity allowing it to draw up an EC Declaration of Conformity and affix the CE mark to certain of our devices since 2019 MDSAP Certificate.

After the product has been CE marked and placed on the market in the EEA, a manufacturer must comply with a number of regulatory requirements relating to:

In 2017, the European Parliament passed the Medical Devices Regulation, which repeals and replaces the EU Medical Devices Directive. Unlike directives, which must be implemented into the national laws of the EEA member States, the regulations would be directly applicable, i.e., without the need for adoption of the EEA member State laws implementing them, in all the EEA member States and are intended to eliminate current differences in the regulation of medical devices among EEA member States. The Medical Devices Regulation, among other things, is intended to establish a uniform, transparent, predictable and sustainable regulatory framework across the EEA for medical devices and in vitro diagnostic devices and ensure a high level of safety and health while supporting innovation.

The Medical Devices Regulation is now effective. The new regulations will, among other things:

To the extent that our products have already been certified under the existing regulatory framework, the MDR (Regulation (EU) 2017/745) allows us to continue to market our CE-marked devices provided that the requirements of its transitional provisions are fulfilled. Under Article 120 of the MDR, certificates issued by Notified Bodies to the MDD (93/42/EEC) prior to May 25, 2017 remain valid until their indicated expiry dates. Following expiration, an agreement must be made between manufacturers and their Notified Body to extend the validity of the MDD issued EC certificates until, at the latest, 31 December 2028. This agreement involves the application of the manufacturer to full MDR certification, something which entails additional and more stringent procedural and product updates when compared to the previous MDD requirements. Among other changes, the MDR introduces annual, comprehensive post-market surveillance update reports, product-centric clinical evaluations, and use of the EUDAMED platform (which remains under development for some modules). The latest update from the European Commission estimates that EUDAMED will be "fully functional" in Q2 2027. Venus Concept has already entered into an agreement for full MDR certification of its products and quality management system with its Notified Body, GMED, and is actively working towards meeting its requirements in full.  

Environmental Regulation

We are subject to numerous foreign, federal, state, and local environmental, health and safety laws and regulations relating to, among other matters, safe working conditions, product stewardship and environmental protection, including those governing the generation, storage, handling, use, transportation and disposal of hazardous or potentially hazardous materials. Some of these laws and regulations require us to obtain licenses or permits to conduct our operations. Environmental laws and regulations are complex, change frequently and have tended to become more stringent over time. Although the costs to comply with applicable environmental laws and regulations have not been material, we cannot predict the impact on our business of new or amended laws or regulations or any changes in the way existing and future laws and regulations are interpreted or enforced, nor can we ensure we will be able to obtain or maintain any required licenses or permits.

Data Privacy and Data Security

We are subject to diverse laws and regulations relating to data privacy and data security, both in the United States and internationally. New global privacy rules are continually being enacted and existing ones are being updated and strengthened. Failure to comply with any privacy or data security laws or regulations or any security incident or breach involving the misappropriation, loss or other unauthorized access, use or disclosure of sensitive or confidential patient or consumer information, whether by us, one of our business associates or another third-party, could have a material adverse effect on our business, reputation, financial condition and results of operations, including but not limited to: material fines and penalties; damages; litigation; consent orders; and injunctive relief. For additional information on the risks we face with regard to data privacy and security, please see Part I, Item 1A “Risk Factors” included elsewhere in this report.

Because the laws and regulations continue to expand, differ from jurisdiction to jurisdiction, and are subject to evolving (and at times inconsistent) governmental interpretation, compliance with these laws and regulations may require significant additional cost expenditures or changes in products or business that increase competition or reduce revenue. Noncompliance could result in the imposition of fines, penalties, orders to stop noncompliant activities, or orders to stop doing business in a jurisdiction.

We are also subject to evolving international laws on data transfer, data localization and electronic marketing. The rules on data transfer will apply when we transfer personal data to group companies or third parties outside of certain geographies. For example, there is currently litigation challenging companies’ data transfers using the EEA’s standard contractual clauses and use of third-party cookies. It is uncertain whether such transfers will be invalidated by the European courts. These changes may require us to find alternative bases for the compliant transfer of personal data from the EEA to the United States to change vendors, or to arrange for local storage of personal data and we are monitoring developments in this area. 

Employees

As of December 31, 2024, we had a total of 292 full-time employees. Of the total number of employees, 128 were based in the United States, 69 based in Canada, 33 based in Israel, and 62 in the rest of the world. Of the total number of full-time employees as of December 31, 2024, approximately 75 were direct sales representatives and sales management.

Corporate Information

We were founded on November 22, 2002 as a Delaware corporation. Our principal executive offices are located at 235 Yorkland Blvd., Suite 900, Toronto, Ontario M2J 4Y8, Canada and our telephone number is (877) 848-8430. You may find our website at www.venus.ai electronic copies of the Annual Report, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act. Such filings are placed on our website as soon as reasonably practicable after they are filed with the SEC. Our most recent charter for our audit, compensation, and nominating and corporate governance committees and our Code of Business Conduct and Ethics and our Anti-Corruption Policy are available on our website as well. Any waiver of our Code of Business Conduct and Ethics may be made only by the Board of Directors of the Company (the "Board"). Any waiver of our Code of Business Conduct and Ethics for any of our directors or executive officers must be disclosed on a Current Report on Form 8-K within four business days, or such shorter period as may be required under applicable regulation. Information contained on, or that can be accessed through, our website is not incorporated by reference into this Annual Report, and you should not consider information on our website to be part of this Annual Report. We have included our website address as an inactive textual reference only.

Available Information

We file Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and other information with the SEC. Our filings with the SEC are available free of charge on the SEC’s website at www.sec.gov.edgar and on our website under the “Investor Relations” tab as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC.

Item 1A. Risk Factors.

Our operations and financial results are subject to various risks and uncertainties, including those described below, any of which could adversely affect our business, results of operations, financial condition and prospects. In such an event, the market price of our common stock could decline, and you may lose all or part of your investment. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also adversely affect our business operations. You should carefully consider the risks described below and the other information in this Annual Report, including our audited consolidated financial statements and the related notes thereto, and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

Risks Related to Our Business

Our evaluation of strategic alternatives may not result in any transaction.

Our ability to execute the current business plan depends on our ability to obtain additional support via a strategic transaction or a series of strategic transactions. The process of exploring strategic alternatives is time-consuming, and our Board has not set a timetable for the conclusion of its review of strategic alternatives. Our review of strategic options and alternatives could result in, among other things, a sale, merger, reverse merger, consolidation or business combination, asset divestiture, partnering, licensing or other collaboration agreements, or potential acquisitions, recapitalizations or restructurings, or in one or more transactions. There can be no assurance that the exploration of strategic alternatives is the correct strategy to pursue or that it will result in the identification or consummation of any transaction or, if consummated, the terms and conditions of any such transaction. Certain potential strategic transaction alternatives, if available and achieved, could result in substantial dilution to existing stockholders and have a material adverse effect on the market price of our common stock.

Additionally, there can be no assurance that we will have sufficient capital resources to fund any strategic transaction, if available. If we raise additional funds through the issuance of equity securities, including as part of a strategic transaction, it could result in substantial dilution to our existing stockholders, increased fixed payment obligations, and any issued securities may have rights senior to those of our shares of common stock.

We offer credit terms to some qualified customers and distributors. In the event that a customer or distributor defaults on the amounts payable to us, our financial results may be adversely affected.

For the year ended December 31, 2024 and 2023, approximately 26% and 33% of our system revenues were derived from our internal financing programs (Venus Prime and our legacy subscription-based model). Under our internal financing programs, we collect an up-front fee, combined with a monthly payment schedule typically over a period of 36 months, with approximately 40% to 45% of total contract payments collected in the first year. For accounting purposes, these arrangements are considered to be sales-type finance leases, where the present value of all cash flows to be received under the agreement is recognized as revenue upon shipment of the system to the customer. We cannot provide any assurance that the financial position of customers purchasing products and services under our internal financing programs will not change adversely before we receive all the monthly installment payments due under the contract. In the event that there is a default by any of the customers to whom we have sold systems under our internal financing programs, we may recognize bad debt expenses in our general and administrative expenses. If the extent of such defaults are material, it could negatively affect our results of operations and operating cash flows. 

In addition to our internal financing programs, we generally offer credit terms of 30 to 90 days to qualified customers and distributors. In the event that there is a default by any of the customers or distributors to whom we have provided credit terms, we may recognize bad debt expenses in our general and administrative expenses. If the extent of such defaults are material, it could negatively affect our future results of operations and cash flows.

We may also be adversely affected by bankruptcies or other business failures of our customers, distributors, and potential customers. A significant delay in the collection of accounts receivable or a reduction of accounts receivables collected may impact our liquidity or result in bad debt expenses.

We have initiated a review of strategic alternatives to improve our operating performance and achieve cost savings, but we may not be able to implement and/or administer these programs in the manner contemplated and these restructuring programs may not produce the desired results.

On February 7, 2023, the Company announced its restructuring plan, including workforce reductions, management changes and the discontinuation of operations in unprofitable markets. Although we expect these initiatives to help us achieve operational improvements and cost savings, we may not be able to implement these initiatives in the manner contemplated or achieve the desired results. Additionally, the implementation of restructuring programs may result in additional costs, some of which could be material. Failure to successfully implement our restructuring initiatives may negatively affect our financial performance.

On January 24, 2024, the Company announced that the Board is evaluating potential strategic alternatives to maximize shareholder value. As part of the process, the Board is considering a full range of strategic alternatives, which may include one or more financings, mergers, reverse mergers, other business combinations, sales of assets, licensings or other transactions.

There can be no assurance that the evaluation of strategic alternatives will result in any transaction, nor can there be any assurance regarding any transaction’s timing or ultimate outcome. The Company has not set a timetable for completion of the process and does not intend to disclose developments related to the process unless and until the Company executes a definitive agreement with respect thereto, or the Board otherwise determines that further disclosure is appropriate or required.

Our recurring losses from operations and negative cash flows raise substantial doubt about our ability to continue as a going concern.

The accompanying audited consolidated financial statements have been prepared on a going concern basis, which contemplates the realization of assets and the satisfaction of liabilities in the normal course of business for the foreseeable future, and, as such, the audited consolidated financial statements do not include any adjustments relating to the recoverability and classification of recorded asset amounts or amounts and classification of liabilities that might be necessary should the Company be unable to continue in existence.

The Company has recurring net operating losses and negative cash flows from operations. As of December 31, 2024 and December 31, 2023, the Company had an accumulated deficit of $308,899 and $261,903, respectively, though, the Company was in compliance with all required covenants as of December 31, 2024, and December 31, 2023. The Company’s recurring losses from operations and negative cash flows raise substantial doubt about the Company’s ability to continue as a going concern within 12 months from the date that the audited consolidated financial statements are issued. The global economy, including the financial and credit markets, has recently experienced extreme volatility and disruptions, including increasing inflation rates, rising interest rates, foreign currency impacts, declines in consumer confidence, and declines in economic growth. All these factors point to uncertainty about economic stability, and the severity and duration of these conditions on our business cannot be predicted, and the Company cannot assure that it will remain in compliance with the financial covenants contained within its credit facilities. 

In order to continue its operations, the Company must achieve profitable operations and/or obtain additional equity or debt financing. Until the Company achieves profitability, management plans to fund its operations and capital expenditures with cash on hand, borrowings, and issuance of capital stock. Until the Company generates revenue at a level to support its cost structure, the Company expects to continue to incur substantial operating losses and net cash outflows from operating activities.

Unfavorable macroeconomic conditions may adversely impact our business and we may need additional capital to fund its future operations.

Given the economic uncertainty in the global markets, the Company cannot anticipate the extent to which the current economic turmoil and financial market conditions will continue to adversely impact the Company’s business and the Company may need additional capital to fund its future operations and to access the capital markets sooner than planned. There can be no assurance that the Company will be successful in raising additional capital or that such capital, if available, will be on terms that are acceptable to the Company. If the Company is unable to raise sufficient additional capital, it may be compelled to reduce the scope of its operations and planned capital expenditures or sell certain assets, including intellectual property assets. These audited consolidated financial statements do not include any adjustments relating to the recoverability and classification of recorded asset amounts or amounts and classification of liabilities that might result from the uncertainty. Such adjustments could be material.

Global supply chain disruption and inflation may have a material adverse effect on the Company's business, financial condition and results of operations.

Global supply chain disruption and inflation may have a material adverse effect on the Company's business, financial condition and results of operations. The Company maintains manufacturing operations at its facilities in San Jose, California and Yokneam, Israel. We depend on third-party suppliers and manufacturers to produce components and provide raw materials used to manufacture our products. The disruptions to the global economy in 2022 which continued through 2024 impeded global supply chains and resulted in longer lead times and increased component costs and freight expenses. As a result, our suppliers or manufacturers may not have the materials, capacity, or capability to timely manufacture our products and alternative suppliers or manufacturers may not be readily available or cost efficient, which would negatively affect our results of operations. Despite the actions the Company has undertaken to minimize the impacts from disruptions to the global economy, there can be no assurances that unforeseen future events in the global supply chain, and inflationary pressures, will not have a material adverse effect on its business, financial condition, and results of operations.

Changes in trade policies among the United States and other countries, in particular the imposition of new or higher tariffs, may adversely impact costs related to the production, manufacturing and transportation of our products. Increased tariffs or the imposition of other barriers to international trade could decrease demand and have a negative effect on our revenues and operating results.

The United States has imposed or proposed new or higher tariffs on certain products exported by a number of U.S. trading partners, including China, Europe, Canada, and Mexico. In response, many of those trading partners, including China, have imposed or proposed new or higher tariffs on American products. The Company derives a meaningful percentage of its revenues from outside of the US, and therefore, these developments, or the perception that any of them could occur, may have a material adverse effect on global economic conditions and the stability of global financial markets, and may have a material adverse effect on the Company's business and operations  

In addition, the Company and/or its contract manufacturers, source component parts used in our products from countries affected by higher tariffs. We also routinely ship our products internationally. An increase in tariffs may adversely affect our gross profit margins in the future due to higher costs of production, manufacturing and transportation of our products and/or impact our ability to sell our product in certain affected international markets.

Furthermore, compliance with export controls and implementation of additional tariffs may increase compliance costs and further affect our business and operating results.

Our loan and security agreements contain restrictions that may limit our flexibility to effectively operate our business.

Main Street Priority Lending Program Term Loan

On December 8, 2020, Venus Concept USA Inc. ("Venus USA"), a wholly-owned subsidiary of the Company, executed a loan and security agreement (the “MSLP Loan Agreement”), a promissory note (the “MSLP Note”), and related documents for a loan in the aggregate amount of $50.0 million for which City National Bank of Florida ("CNB") will serve as lender pursuant to the Main Street Priority Loan Facility as established by the Board of Governors of the Federal Reserve System Section 13(3) of the Federal Reserve Act (the “MSLP Loan”). Venus USA’s obligations under the MSLP Loan will be secured pursuant to a guaranty of payment and performance dated as of December 8, 2020 (the “Guaranty Agreement”), by and between the Company and CNB. On December 9, 2020, the MSLP Loan was funded and the transaction closed. On May 24, 2024, and again on September 26, 2024, a portion of the principal was converted into shares of Preferred Stock, however the same terms from the original agreement continued to apply to the remaining loan. For additional details of the MSLP Loan Agreement, see Note 10 “Main Street Term Loan” to our consolidated financial statements included elsewhere in this report.

The MSLP Note provides for customary events of default, including, among others, those relating to a failure to make payment, bankruptcy, breaches of representations and covenants, and the occurrence of certain events. In addition, the MSLP Loan Agreement and MSLP Note contain various covenants that limit our ability to engage in specified types of transactions. Subject to limited exceptions, these covenants limit our ability, without CNB’s consent, to, among other things, sell, lease, transfer, exclusively license or dispose of our assets, incur, create or permit to exist additional indebtedness, or liens, to make dividends and other restricted payments, and to make certain changes to our ownership structure.

For additional details of the MSLP Loan Agreement, the related agreements and the covenants to which we are subject, see Management’s Discussion and Analysis of Financial Condition and Results of Operations and Note 10 “Main Street Term Loan” to the consolidated financial statements included elsewhere in this Annual Report. 

Madryn Credit Agreement and Exchange Agreement

On October 11, 2016, Venus Ltd. entered into a credit agreement as a guarantor with Madryn Health Partners, LP, as administrative agent, and certain of its affiliates as lenders (collectively, “Madryn”), as amended (the “Madryn Credit Agreement”), pursuant to which Madryn agreed to make certain loans to certain of Venus Concept’s subsidiaries.

Contemporaneously with the MSLP Loan Agreement, the Company, Venus USA, Venus Concept Canada Corp. (“Venus Canada”), Venus Concept Ltd. ("Venus Ltd."), and the Madryn Noteholders (as defined below), entered into a Securities Exchange Agreement (the “Exchange Agreement”) dated as of December 8, 2020, pursuant to which the Company (i) repaid on December 9, 2020, $42.5 million aggregate principal amount owed under the Madryn Credit Agreement, and (ii) issued, on December 9, 2020, to Madryn Health Partners (Cayman Master), LP and Madryn Health Partners, LP (the “Madryn Noteholders”) secured subordinated convertible notes in the aggregate principal amount of $26.7 million (the “Notes”). The Madryn Credit Agreement was terminated effective December 9, 2020 upon the funding and closing of the MSLP Loan and the issuance of the Notes.

In connection with the Exchange Agreement, we also entered into a Guaranty and Security Agreement dated as of December 9, 2020 (the “Madryn Security Agreement”), pursuant to which we agreed to grant Madryn a security interest in substantially all of our assets to secure the obligations under the Notes. The Madryn Security Agreement contains various covenants that limit our ability to engage in specified types of transactions. Subject to limited exceptions, these covenants limit our ability, without the Madryn Noteholders’ consent, to, among other things, incur, create or permit to exist additional indebtedness, or liens, and to make certain changes to our ownership structure. The Madryn Security Agreement also contains a covenant which requires that if we or any of our subsidiaries that has guaranteed the Notes consummates a disposition of material assets the result of which is that less than 50% of the consolidated net tangible assets of such entities secure the Notes then, within 90 days thereafter, we and our subsidiaries party to the Madryn Security Agreement must provide certain additional collateral so that more than 50% of the consolidated net tangible assets of the Company and its subsidiaries which have guaranteed the Notes will be collateral securing the Notes.

If an Event of Default occurs, then, the Madryn Noteholders may, subject to certain terms, (i) declare the outstanding principal amount of Notes, all accrued and unpaid interest and all other amounts owing under the Notes and other transaction documents entered into in connection therewith to be immediately become due and payable without any further action or notice by any person (ii) foreclose on the collateral granted to it to collateralize the indebtedness and (ii) exercise all rights and remedies available to it under the Notes, the Madryn Security Agreement and any other document entered into in connection with the foregoing, which would significantly affect our ability to operate our business.

For additional information regarding the Madryn Credit Agreement, the Exchange Agreement, the Notes and related agreements, see Note 11 “Madryn Debt and Convertible Notes” to our consolidated financial statements included elsewhere in this report.

Madryn Loan and Security Agreement

On April 23, 2024, the Company entered into a Loan and Security Agreement (the “Loan and Security Agreement”), by and among Venus USA, (the “Bridge Borrower”), Venus Canada, Venus Ltd. (Venus Ltd., together with the Company and Venus Canada, the “2024 Guarantors,” and together with the Bridge Borrower, the “Bridge Financing Loan Parties”) and, each lender party thereto (collectively, the “2024 Lenders”) and Madryn Health Partners, LP, as administrative agent. Pursuant to the Loan and Security Agreement, the 2024 Lenders agreed to provide the Bridge Borrower with bridge financing in the form of a term loan in the original principal amount of $2,238,000 and one or more delayed draw term loans of up to an additional principal amount of $21 million (the “Bridge Financing”).

The Loan and Security Agreement also provides that all present and future indebtedness and the obligations of the Borrower to Madryn shall be secured by a priority security interest in all real and personal property collateral of the Loan Parties.

The Loan and Security Agreement contains customary representations, warranties and affirmative and negative covenants. In addition, the Loan and Security Agreement contains customary events of default that entitle Madryn to cause the Borrower’s indebtedness under the Loan and Security Agreement to become immediately due and payable, and to exercise remedies against the Loan Parties and the collateral securing the term loan. Under the Loan and Security Agreement, an event of default will occur if, among other things, any Loan Party fails to make payments under the Loan and Security Agreement, any Loan Party breaches any of the covenants under the Loan and Security Agreement, a Change of Control (as defined in the Loan and Security Agreement) occurs, any Loan Party, or its assets, become subject to certain legal proceedings, such as bankruptcy proceedings. Upon the occurrence and for the duration of an event of default, a default interest rate equal to 15.0% per annum will apply to all obligations owed under the Loan and Security Agreement.

For additional information regarding the Madryn Loan and Security Agreement, see Note 11 “Madryn Debt and Convertible Notes” to our consolidated financial statements included elsewhere in this report.

EW Notes and Security Agreement

On January 18, 2024, the Company, Venus USA, Venus Canada and Venus Ltd entered into a Note Purchase and Registration Rights Agreement (the “Note Purchase Agreement”) with EW Healthcare Partners, L.P. (“EW”) and EW Healthcare Partners-A, L.P. (“EW-A,” and together with EW, the “EW Investors”). Pursuant to the Note Purchase Agreement, the Company issued and sold to the Investors $2.0 million in aggregate principal amount of secured subordinated convertible notes (the “EW Notes”). The Notes are secured by a Guaranty and Security Agreement, dated January 18, 2024 (the “EW Security Agreement”).

Pursuant to the Security Agreement, during the continuance of an event of default under the Notes, if the Company is unable to repay all outstanding amounts under the EW Notes, the EW Investors may, subject to the terms of the CNB Subordination Agreement (as defined therein), foreclose on the collateral to collateralize such indebtedness. Any such foreclosure could significantly affect the Company’s ability to operate its business.

The Security Agreement contains various covenants that limit the Company’s ability to engage in specified types of transactions. Subject to limited exceptions, these covenants include restrictions on the Company’s ability, to incur, create or permit to exist additional indebtedness, or liens, and to make certain changes to its ownership structure, in each case without the EW Investor’s consent.

For additional information regarding the Madryn Loan and Security Agreement, see Note 13 “EW Convertible Notes” to our consolidated financial statements included elsewhere in this report.

We will require additional financing to achieve our goals, and a failure to obtain this necessary capital when needed on acceptable terms, or at all, could force us to delay, limit, reduce or terminate our product development, commercialization and other operations or efforts.

Since our inception, we have invested a significant portion of our efforts and financial resources in research and development and sales and marketing activities. Research and development, clinical trials, product engineering, ongoing product upgrades and other enhancements, as well as seeking regulatory clearances and approvals to market future products will require substantial funds to complete. As of December 31, 2024, we had capital resources consisting of cash and cash equivalents of approximately $4.3 million. Further, in order to grow our business and increase revenues, we will need to introduce and commercialize new products, maintain an effective sales and marketing force, and implement new software systems. We believe that we will continue to expend substantial resources for the foreseeable future in connection with the ongoing commercializing of our systems, supporting our sales and marketing efforts, and continuing research and development and product enhancements activities. We will have to increase our revenues while effectively managing our expenses in order to achieve profitability and to sustain it. Our operating expenses may fluctuate significantly in the future because of a variety of factors, many of which are outside of our control. Our failure to control expenses could make it difficult to achieve profitability or to sustain profitability in the future.

Our budgeted expense levels are based in part on our expectations concerning future revenue from systems sales, product sales and servicing and procedure-based fees. We may be unable to reduce our expenditures in a timely manner to compensate for any unexpected shortfalls in revenue. Accordingly, a significant shortfall in market acceptance or demand for our systems and procedures could have a material adverse impact on our business and financial condition.

While we believe that the net proceeds from our recent and announced financing activities, our recent initiatives in pursuing strategic alternatives, together with our existing cash and cash equivalents, will enable us to fund our operating expenses and capital expenditure requirements for at least the next 12 months, we may need to raise additional capital through public or private equity or debt financings or other sources, such as strategic collaborations sooner than expected or otherwise implement additional cost-saving initiatives. Any such financing may result in dilution to stockholders, the issuance of securities that may have rights, preferences, or privileges senior to those of holders of our common stock, the imposition of more burdensome debt covenants and repayment obligations, the licensing of rights to our technology or other restrictions that may affect our business. In addition, we may seek additional capital if favorable market conditions exist or given other strategic considerations even if we believe we have sufficient capital to fund our current or future operating plans.

Additional funds may not be available when we need them, on terms that are acceptable to us, or at all. If adequate funds are not available to us on a timely basis, we may be required to:

We are restricted by covenants in the MSLP Loan, the Loan and the Security Agreement (as defined below), the Madryn Security Agreement and the EW Convertible Note. These covenants restrict, among other things, our ability to incur additional indebtedness, which may limit our ability to obtain additional debt financing.

Because we incur a substantial portion of our expenses in currencies other than the U.S. dollar, our financial condition and results of operations may be adversely affected by currency fluctuations and inflation.

In the years ended December 31, 2024 and 2023, 69% and 65%, respectively, of our global revenues were denominated in U.S. dollars and our reporting currency was the U.S. dollar. We pay a meaningful portion of our expenses in New Israeli Shekels (“NIS”), Canadian Dollars (“CAD”), and other foreign currencies. Expenses in NIS and CAD accounted for 20% and 18%, respectively, of our expenses for the year ended December 31, 2024, and 26% and 16%, respectively, of our expenses for the year ended December 31, 2023. Salaries paid to our employees, general and administrative expenses and general sales and related expenses are paid in many different currencies. As a result, we are exposed to the currency fluctuation risks relating to the denomination of its future revenues in U.S. dollars. More specifically, if the U.S. dollar devalues against the CAD or the NIS, our CAD and NIS denominated expenses will be greater than anticipated when reported in U.S. dollars. Inflation in Israel compounds the adverse impact of such devaluation by further increasing the amount of our Israeli expenses. Israeli inflation may also in the future outweigh the positive effect of any appreciation of the U.S. dollar relative to the CAD and the NIS, if, and to the extent that, it outpaces such appreciation or precedes such appreciation. We generally do not engage in currency hedging to protect the Company from fluctuations in the exchange rates of the CAD, NIS, and other foreign currencies in relation to the U.S. dollar (and/or from inflation of such foreign currencies), and we may be exposed to material adverse effects from such movements. We cannot predict any future trends in the rate of inflation in Israel or the rate of devaluation (if any) of the U.S. dollar or any other currency against the NIS or CAD.

Downturns in the economy or economic uncertainty may reduce patient and customer demand for our systems and services, which could adversely affect our business, financial condition or results of operations.

Our results of operations could be adversely affected by general conditions in the global economy and in the global financial markets. Furthermore, the aesthetic industry in which we operate is particularly vulnerable to unfavorable economic trends. Treatments using our systems involve elective procedures, the cost of which must be borne by patients, and is not reimbursable through government or private health insurance. Economic uncertainty may reduce patient demand for the procedures performed using our systems; if there is not sufficient patient demand for the procedures for which our systems are used, practitioner demand for these systems could drop, negatively impacting operating results. The decision to undergo a procedure using our systems is driven by consumer demand. In times of economic uncertainty or recession, individuals generally reduce the amount of money that they spend on discretionary items, including aesthetic procedures. If our customers’ patients face economic hardships, our business would be negatively impacted, and our financial performance would be materially harmed in the event that any of the above factors discourage patients from seeking the procedures for which our systems are used. A weak or declining economy could also strain our manufacturers or suppliers, possibly resulting in supply disruption, or cause our customers to delay or stop making payments for our systems or services. The impact of economic uncertainty on our industry may vary from region to region.

It is difficult to forecast our future performance and our financial results may fluctuate unpredictably.

The rapid evolution of the markets for medical technologies and aesthetic products makes it difficult for us to predict our future performance. Several factors, many of which are outside of our control, may contribute to fluctuations in our financial results, such as:

We compete against companies that offer alternative solutions to our systems, or have greater resources, a larger installed base of customers and broader product offerings than we have. If we are not able to effectively compete with these companies and alternative solutions, our business may not continue to grow.

The medical technology and aesthetic product markets are highly competitive and dynamic and are characterized by rapid and substantial technological development and product innovation. Demand for our systems is impacted by the products and procedures offered by our competitors. Certain of our systems also compete against conventional non-energy-based treatments, such as Botox and collagen injections, chemical peels, and microdermabrasion. In the United States, we compete against companies that have developed minimally invasive and non-invasive medical aesthetic procedures. Outside of the United States, likely due to less stringent regulatory requirements, there are more aesthetic products and procedures available in international markets than are cleared for use in the United States. Sometimes, there are also fewer limitations on the claims our competitors in international markets can make about the effectiveness of their products and the manner in which they can market them. As a result, we may face a greater number of competitors in markets outside of the United States.

We also compete generally with medical technology and aesthetic companies, including those offering products and products unrelated to skin treatment. Aesthetic industry consolidations have created combined entities with greater financial resources, deeper sales channels, and greater pricing flexibility than ours. Rumored or actual consolidation of our competitors could cause uncertainty and disruption to our business. In the surgical hair restoration market, we consider our direct competition to be FUT Strip Surgeries and Manual FUE procedures. Many of our surgical device and equipment competitors have greater capital resources, sales and marketing operations and service infrastructures than we do, as well as longer commercial histories and more extensive relationships with physicians. Our indirect competition in the hair restoration market also includes non-surgical treatments for hair loss, such as prescription therapeutics, including Propecia, and non-prescription remedies, such as wigs, hair pieces and spray-on applications. Some of these companies have greater resources than we do, a broad range of product offerings, large direct sales forces, and long-term customer relationships with the physicians we target, which could make our market penetration efforts more difficult. Competition in the medical technology and aesthetic hair restoration markets could result in price-cutting, reduced profit margins, and limited market share, any of which would harm our business, financial condition, and results of operations.

Surgical alternatives to the ARTAS System may be able to compete more effectively than the ARTAS procedure in established practices with trained staff and workflows built around performing these surgical alternatives. Practices experienced in offering FUT Strip Surgery or Manual FUE using hand-held devices may be reluctant to incorporate or convert their practices to offer ARTAS procedures due to the effort involved to make such changes. These alternative options may be able to provide satisfactory results for male hair loss, generally at a lower cost to the patient than the ARTAS System. As a result, if patients choose these competitive alternatives, our results of operation could be adversely affected.

The aesthetic equipment market is characterized by rapid innovation. Our inability to develop and/or acquire new products and services, obtain regulatory clearance and maintain regulatory compliance, market new products successfully, and identify new markets for our technology may cause us to fail to compete effectively.

The aesthetic energy-based treatment equipment and hair restoration markets are subject to continuous technological development and product innovation. If we do not continue to innovate and develop new products, services and applications, our competitive position will likely deteriorate as other companies successfully design and commercialize new products, applications and services or enhancements to current products. To continue to grow in the future, we must continue to develop and/or acquire new and innovative aesthetic and medical products, services and applications, identify new markets, and successfully launch any newly developed or acquired product offerings.

We also believe that, to increase revenue from sales of new products, we need to continue to develop our clinical support, further expand and nurture relationships with industry thought leaders, and increase market awareness of the benefits of our new products. However, even with a significant investment in research and development, we may be unable to continue to develop, acquire or effectively launch and market new products and technologies regularly, or at all. If we fail to successfully innovate and commercialize new products or enhancements, our business may be harmed.

We depend on third-party distributors to market and sell our systems in certain markets.

In addition to our direct sales and marketing forces, we currently depend on third-party distributors to sell, market, and service our systems in certain markets outside of North America and to train our customers in these markets. For the years ended December 31, 2024 and 2023, we generated 13% and 8%, respectively, of our systems revenues from sales made through third-party distributors. Our agreements with third-party distributors set forth minimum quarterly purchase commitments required for each distributor and provide the distributor the right to distribute our systems within a designated territory. If we continue to expand into new markets outside of North America, we will need to engage additional third-party distributors which exposes us to a number of risks, including:

We depend on senior management and key employees to operate our business. Changes to management or the inability to recruit, hire, train and retain qualified personnel, could harm our ability to successfully manage, develop and expand our business, which could impair our future revenue and profitability.

Our success depends on the skills, experience and efforts of our senior management and other key employees, the majority of whom are employed on an “at will” basis. The loss of any of our senior management and other key employees could weaken our management expertise and harm our business, and it may not be able to find adequate replacements on a timely basis, or at all. Any of our senior management and other key employees may terminate their employment at any time, with or without notice and their knowledge of our business and industry may be difficult to replace.

We may not be able to attract and retain personnel on acceptable terms given the competition for such personnel among technology and healthcare companies and universities. The loss of, or our inability to attract, train and retain qualified personnel could harm our business and our ability to compete and become profitable.

Economic and other risks associated with international sales and operations could adversely affect our business.

Sales in markets outside of the United States accounted for approximately 41% of our revenue for the year ended December 31, 2024 and 43% of our revenue for the year ended December 31, 2023. In addition, the majority of our research and development activities and the manufacture of our systems are located outside of the United States. As a result of our international business, we are subject to a number of risks, including:

If one or more of these risks were realized, it could require us to dedicate significant financial and managerial resources, and our results of operations and financial condition could be adversely affected.

We rely on a limited number of third-party contract manufacturers for the production of our systems and only have contracts with certain suppliers for the components used in our systems. The failure of these third parties to perform could adversely affect our ability to meet demand for our systems in a timely and cost-effective manner.

We rely on third-party contract manufacturers in Karmiel, Israel, Mazet, France, and San Jose, California for the manufacture of the majority of our systems. Other than with respect to the ARTAS iX System and diode stacks for certain of our devices, the majority of the components used in our systems are available off the shelf and we do not rely on any single supplier, and as a result we do not have any long-term supply agreements for these components. Our reliance on third-party contract manufacturers and suppliers involves a number of risks, including, among other things:

If any of these risks materialize, they could significantly increase our costs and effect our ability to meet demand for our systems. If we are unable to satisfy commercial demand for our systems in a timely manner, our ability to generate revenue would be impaired, market acceptance of our systems and our reputation could be adversely affected, and customers may instead purchase or use our competitors’ products. In addition, we could be forced to secure new or alternative contract manufacturers or suppliers. Securing a replacement contract manufacturer or supplier could be difficult. The introduction of new or alternative manufacturers or suppliers also may require design changes to our medical device products that are subject to the FDA and other regulatory clearances or approvals, or a new or revised CE Certificate of Conformity. We may also be required to assess the new manufacturer’s compliance with all applicable regulations and guidelines, which could further impede our ability to manufacture our systems in a timely manner. As a result, we could incur increased production costs, experience delays in deliveries of our systems, suffer damage to our reputation, and experience an adverse effect on our business and financial results.

Both our manufacturing of certain of our systems and NPI’s manufacturing of the ARTAS procedure kits are dependent upon third-party suppliers and, in some cases, sole suppliers, for the majority of our components, subassemblies and materials, making us vulnerable to supply shortages and price fluctuations, which could harm our business. 

We and NPI, as the case may be, rely on several sole source suppliers for certain components of the ARTAS System, reusable procedure kits, disposable procedure kits and spare procedure kits. We also rely on other suppliers for some of the components used to manufacture our other devices. These suppliers may be unwilling or unable to supply components of these systems to us or NPI reliably and at the levels we anticipate or require to meet demand for our products. For us to be successful, our suppliers must be able to provide products and components in substantial quantities, in compliance with regulatory requirements, in accordance with agreed upon specifications, at acceptable costs and on a timely basis. An interruption in our commercial operations could occur if we encounter delays or difficulties in securing these components, and if we cannot then obtain an acceptable substitute. We source a number of components used in the manufacture of our systems from China and given the uncertainty with respect to the tariffs, if any, the new US Federal administration will levy on goods imported from China and other international jurisdictions, access to our existing supply chain may be become impaired, which could result in manufacturing delays and inventory shortages. If we are required to transition to new third-party suppliers for certain components of our systems or our ARTAS procedure kits, we believe that there are only a few such suppliers that can supply the necessary components. A supply interruption, price fluctuation or an increase in demand beyond our current suppliers’ capabilities could harm our ability to manufacture our systems and NPI’s ability to manufacture our ARTAS procedure kits until new sources of supply are identified and qualified. In addition, the use of components or materials furnished by these alternative suppliers could require us to alter our operations. 

In addition, our reliance on these suppliers subjects us to a number of risks that could harm our reputation, business, and financial condition, including, among other things, a lack of long-term supply arrangements for key components with our suppliers, difficulty and cost associated with locating and qualifying alternative suppliers for our components in a timely manner, production delays related to the evaluation and testing of products from alternative suppliers, and corresponding regulatory qualifications, delay in delivery due to our suppliers prioritizing other customer orders over ours, damage to our reputation caused by defective components produced by our suppliers, and increased cost of our warranty program due to product repair or replacement based upon defects in components produced by our suppliers. 

Where practicable, we are seeking, or intending to seek, second-source manufacturers for certain of our components. However, we cannot provide assurances that we will be successful in establishing second-source manufacturers or that the second-source manufacturers will be able to satisfy commercial demand for our systems. If any of these risks materialize, costs could significantly increase and our ability to meet demand for our products could be impacted. If we are unable to satisfy commercial demand for our systems in a timely manner, our ability to generate revenue from these systems would be impaired.

Product liability suits could be brought against us for defective design, labeling, material, workmanship, or software or misuse of our systems, and could result in expensive and time-consuming litigation, payment of substantial damages, an increase in our insurance rates and substantial harm to our reputation.

If our systems are defectively designed, manufactured, or labeled, contain defective components or software, or are misused, we may become subject to substantial and costly litigation by our customers or their patients. For example, if a patient is injured or suffers unanticipated adverse events after undergoing a procedure using one of our systems, or if system operating guidelines are found to be inadequate, we may be subject to product liability claims. Claims could also be asserted under state consumer protection acts. If we cannot successfully defend ourselves against product liability claims, we may incur substantial liabilities. Even successful defense would require significant financial and management resources. Regardless of the merits or eventual outcome, product liability claims may result in:

We currently have product liability insurance, but any claim that may be brought against us could result in a court judgment or settlement in an amount that is not covered, in whole or in part, by our insurance or that is in excess of the limits of our insurance coverage. Our insurance policies also have various exclusions and deductibles, and we may be subject to a product liability claim for which we have no coverage. We will have to pay any amounts awarded by a court or negotiated in a settlement that exceed our coverage limitations or that are not covered by our insurance, and we may not have, or be able to obtain, sufficient funds to pay such amounts. Moreover, in the future, we may not be able to maintain insurance coverage at a reasonable cost or in sufficient amounts to protect us against losses.

Third parties may attempt to reverse engineer or produce counterfeit versions of our systems which may negatively affect our reputation, or harm patients and subject us to product liability claims.

Third parties have sought in the past, and in the future may seek, to reverse engineer or develop counterfeit products that are substantially similar or compatible with our systems and available to practitioners at lower prices than our own. 

Any reverse engineered or counterfeit products that purport to be our systems that are currently in the market or that may be introduced in the future may harm our reputation and our sale of products. Moreover, if we commence litigation to stop or prevent any unauthorized use of our technology that occurs from reverse engineering or counterfeiting of our products, or if we have to defend allegations of such unauthorized use of a third party’s technology, such litigation would be time-consuming, force us to incur significant costs and divert our attention and the efforts of its management and other employees.

Security breaches and other disruptions could compromise our information and expose us to liability.

In the ordinary course of our business and to the extent necessary, we rely on software to control the ongoing use of our systems, collect, and aggregate diagnostic data, and collect and store sensitive data, including intellectual property and proprietary business information, and certain personally identifiable information of customers, distributors, consultants and employees in our data centers and on our networks. The secure processing, maintenance, and transmission of this information is important to our operations and business strategy. We have established physical, electronic, and policy measures to secure our systems in an attempt to prevent a system breach and the theft of data we collect, and we rely on commercially available systems, software, tools, and monitoring in our effort to provide security for our information technology systems and the digital information we collect, process, transmit and store. Despite our security measures, our information technology systems and related infrastructure, and those of our current and any future collaborators, contractors, and consultants and other third parties on which we rely, may be vulnerable to attacks by computer viruses, malware, hackers, or breaches due to malfeasance, employee or contractor error, telecommunication or electrical failures, terrorism or other created or natural disasters. Despite our cybersecurity measures, it is possible for security vulnerabilities to remain undetected for an extended time period, up to and including several years. While we have experienced, and expect to continue to experience, threats and disruptions to the Company’s information technology infrastructure, none of them to date has had a material impact to the Company. The costs to us to mitigate network security problems, bugs, viruses, worms, malicious software programs and security vulnerabilities could be significant, and while we have implemented security measures to protect our data security and information technology systems, our efforts to address these problems may not be successful, and these problems could result in unexpected interruptions, delays, cessation of service and other harm to our business and our competitive position. Moreover, if a computer security breach affects our systems or results in the unauthorized release of personally identifiable information, our reputation could be materially damaged. In addition, such a breach may require notification to governmental agencies, the media, or individuals pursuant to various federal and state privacy and security laws, if applicable, and may be subject to financial liability to the extent we are not in compliance with privacy laws to which we are subject at the time of a breach. We could also be exposed to a risk of loss or litigation and potential liability, which could materially adversely affect our business, results of operations and financial condition. 

The clinical trial process required to obtain regulatory clearances or approvals is lengthy and expensive with uncertain outcomes and could result in delays in new product introductions.

In order to obtain 510(k) clearance for certain of our systems, we were required to conduct clinical trials, and we expect to conduct clinical trials in support of marketing authorization for future products and product enhancements. Conducting clinical trials is a complex and expensive process, can take many years, and outcomes are inherently uncertain. We may suffer significant setbacks in clinical trials, even after earlier pre-clinical or clinical trials showed promising results, and failure can occur at any time during the clinical trial process. Any of our products may malfunction or may produce undesirable adverse effects that could cause us or regulatory authorities to interrupt, delay or halt clinical trials. We, the FDA, or another regulatory authority may suspend or terminate clinical trials at any time to avoid exposing trial participants to unacceptable health risks.

The data we collect from our pre-clinical studies and clinical trials may not be sufficient to support the FDA clearance or approval, and if we are unable to demonstrate the safety and efficacy of our future products in our clinical trials, we will be unable to obtain regulatory clearance or approval to market our products.

In addition, we may estimate and publicly announce the anticipated timing of the accomplishment of various clinical, regulatory and other product development goals, which are often referred to as milestones. The actual timing of these milestones could vary dramatically compared to our estimates, in some cases for reasons beyond our control. We cannot assure you that we will meet our projected milestones and if we do not meet these milestones as publicly announced, the commercialization of our products may be delayed and, as a result, our stock price may decline.

Delays in the commencement or completion of clinical testing could significantly affect our product development costs. The commencement and completion of clinical trials can be delayed or terminated for a number of reasons, including delays or failures related to:

Patient enrollment in clinical trials and completion of patient follow-up depend on many factors, including the size of the patient population, the nature of the trial protocol, the proximity of patients to clinical sites, the eligibility criteria for the clinical trial, patient compliance, competing clinical trials and clinicians’ and patients’ perceptions as to the potential advantages of the product being studied in relation to other available therapies, including any new treatments that may be cleared or approved for the indications we are investigating. Delays in patient enrollment or failure of patients to continue to participate in a clinical trial may delay commencement or completion of the clinical trial, cause an increase in the costs of the clinical trial and delays, or result in the failure of the clinical trial.

We could also encounter delays if the FDA concluded that our financial relationships with our principal investigators resulted in a perceived or actual conflict of interest that may have affected the interpretation of a study, the integrity of the data generated at the applicable clinical trial site or the utility of the clinical trial itself. Principal investigators for our clinical trials may serve as scientific advisors or consultants to us from time to time and receive cash compensation and/or stock options in connection with such services. If these relationships and any related compensation to or ownership interest by the clinical investigator carrying out the study result in perceived or actual conflicts of interest, or the FDA concludes that the financial relationship may have affected interpretation of the study, the integrity of the data generated at the applicable clinical trial site may be questioned and the utility of the clinical trial itself may be jeopardized, which could result in the delay or rejection of our marketing application by the FDA. Any such delay or rejection could prevent us from commercializing any of our products in development.

Furthermore, a clinical trial may be suspended or terminated by us, the FDA, the IRB overseeing the clinical trial at issue, the Data Safety Monitoring Board for such trial, any of our clinical trial sites with respect to that site, or other regulatory authorities due to several factors, including:

Additionally, changes in regulatory requirements and guidance may occur and we may need to amend clinical trial protocols to reflect these changes. Amendments may require us to resubmit our clinical trial protocols to IRBs for reexamination, which may impact the costs, timing or successful completion of a clinical trial. If we experience delays in completion of, or if we terminate, any of our clinical trials, the commercial prospects for our products may be harmed and our ability to generate product revenue from these products will be delayed or not realized at all. In addition, any delays in completing our clinical trials will increase our costs, slow down our product development and approval process and jeopardize our ability to commence product sales and generate revenue. Any of these occurrences may significantly harm our business, financial condition and prospects significantly. In addition, many of the factors that cause, or lead to, a delay in the commencement or completion of a clinical trial may also ultimately lead to the denial of regulatory approval of the subject product.

Risks Related to Intellectual Property

If we are unable to obtain, maintain, retain and enforce adequate intellectual property rights covering our products and any future products we develop, others may be able to make, use, or sell products that are substantially the same as ours, which could adversely affect our ability to compete in the market.

Our commercial success is dependent in part on obtaining, maintaining, retaining and enforcing our intellectual property rights, including our patents and the patents we exclusively license. If we are unable to obtain, maintain, retain and enforce sufficiently broad intellectual property protection covering our products and any other products we develop, others may be able to make, use, or sell products that are substantially the same as our products without incurring the sizeable development and licensing costs that we have incurred, which would adversely affect our ability to compete effectively in the market.

We protect our proprietary information and technology through nondisclosure agreements, noncompetition covenants, and other contractual provisions and agreements, as well as through patent, trademark and trade secret laws in the United States and similar laws in other countries. These protections may not be available in all jurisdictions and may be inadequate to prevent our competitors or other third-party manufacturers from copying, reverse engineering or otherwise obtaining and using our technology, proprietary rights or products. For example, the laws of certain countries in which our products are manufactured or licensed do not protect our proprietary rights to the same extent as the laws of the United States. In addition, third parties may seek to challenge, invalidate or circumvent our patents, trademarks or applications for any of the foregoing. We have focused patent, trademark, copyright and trade secret protection primarily in the United States and Europe, although we distribute our products globally. As a result, we may not have sufficient protection of our intellectual property in all countries where infringement may occur. There can be no assurance that our competitors will not independently develop technologies that are substantially equivalent or superior to our technology or design around our proprietary rights. In each case, our ability to compete could be significantly impaired. To prevent substantial unauthorized use of our intellectual property rights, it may be necessary to prosecute actions for infringement and/or misappropriation of our proprietary rights against third parties. Any such action could result in significant costs and diversion of our resources and management’s attention, and we may not be successful in such action.

We have obtained and maintained our existing patents, sought to diligently prosecute our existing patent applications, and sought to file patent applications and obtain additional patents and other intellectual property rights to restrict the ability of others to market products that compete with our current and future products. As of December 31, 2024, the Company’s patent portfolio was comprised of 16 issued U.S. patents, 8 pending U.S. patent applications, 31 issued foreign counterpart patents, and 12 pending foreign counterpart patent applications relating to the (MP)2, fractional RF and Ai.ME, and Directional Skin Tightening technology (including cellulite treatments), 4 issued foreign patents covering the NeoGraft system and its methods of use, and 92 issued U.S. patents, 176 issued foreign counterpart patents, and 4 pending foreign counterpart patent applications relating to the ARTAS System and methods of use. However, patents may not be issued on any pending or future patent applications we file, the claims that issue may provide limited or no coverage of its products and technologies, and, moreover, issued patents owned or licensed to us now or in the future may be found by a court to be invalid or otherwise unenforceable at any time. We may choose to not apply for patent protection or may fail to apply for patent protection on important technologies or product candidates in a timely fashion. In addition, we may be unable to obtain patents necessary to protect our technology or products due to prior uses of or claims to similar processes or systems by third parties, or to blocking intellectual property owned by third parties. Even though we have issued patents, and even if additional patents are issued to us in the future, they may be challenged, narrowed, invalidated, held to be unenforceable or circumvented, which could limit our ability to prevent competitors from using similar technology or marketing similar products, or limit the length of time our technologies and products have patent protection. Also, even if our existing and future patents are determined to be valid and enforceable, they may not be drafted or interpreted broadly enough to prevent others from marketing products and services similar to ours, by easily designing products around our patents or otherwise developing competing products or technologies. In addition, the ownership or inventorship of one or more of our patents and patent applications may be challenged by one or more parties in one or more jurisdictions, including in a patent interference or a derivation proceeding in the United States Patent and Trademark Office (“USPTO”), or a similar foreign governmental agency or during the course of a litigation. If a competitor were able to successfully design around our patents, we may not be able to block such competition, and furthermore the competitor’s products may be more effective or commercially successful than its products. In addition, our current patents will eventually expire, or they may otherwise cease to provide meaningful competitive advantage, and we may be unable to adequately develop new technologies and obtain future patent protection to preserve our competitive advantage or avoid other adverse effects on our business.

We have a number of foreign patent applications, and while we generally try to pursue patent protection in the jurisdictions in which we do or intend to do significant business, the filing, prosecuting, maintaining and defending patents relating to our current or future products in all countries throughout the world would be prohibitively expensive. Furthermore, the laws of some foreign jurisdictions do not protect intellectual property rights to the same extent as laws in the U.S., and many companies have encountered significant difficulties in obtaining, protecting, and defending such rights in foreign jurisdictions. As a result, our intellectual property may not provide us with sufficient rights to exclude others from commercializing products similar or identical to its products in various jurisdictions. Competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products, and we may be unable to prevent such competitors from importing those infringing products into territories where we do not have patent protection or into territories where we do have patent protection but there is no prohibition against such importation, or even if such prohibitions exist, the law or related enforcement is not as strong as in the United States. These products may compete with our systems and our patents and our other intellectual property rights may not be effective or sufficient to prevent competitors from competing in those jurisdictions. If we encounter such difficulties or are otherwise precluded from effectively protecting and enforcing our intellectual property rights in foreign jurisdictions, our business prospects could be substantially harmed.

Third-party patent applications and patents could significantly reduce the scope of protection of patents owned by or licensed to us and limit our ability to obtain a meaningful scope of patent protection or market and sell our products or develop, market, and sell future products. In the United States, other parties may attack the validity of our patents after they issue, in a court proceeding, or in an ex-parte reexamination proceeding or one or more post-grant procedures that were authorized under the America Invents Act of 2011, that were available commencing on March 16, 2013 such as post-grant review, covered business method review or inter partes review, in front of the Patent Trial and Appeal Board of the USPTO. The costs of these proceedings could be substantial.

At any given time, we may be involved as either a plaintiff or a defendant in a number of patent infringement actions, the outcomes of which may not be known for prolonged periods of time. The large number of patents, the rapid rate of new patent applications and issuances, the complexities of the technologies involved, and the uncertainty of litigation significantly increase the risks related to any patent litigation. Any potential intellectual property litigation may (i) force us to withdraw existing products from the market or may be unable to commercialize one or more of our products, (ii) cause us to incur substantial costs, and (iii) could place a significant strain on our financial resources, divert the attention of management from our core business and harm our reputation.

Even if resolved in our favor, litigation or other legal proceedings relating to intellectual property claims may cause us to incur significant expenses and could distract our technical and management personnel from their normal responsibilities. In addition, there could be public announcements of the results of hearings, motions or other interim proceedings or developments, and if securities analysts or investors perceive these results to be negative, it could have a material adverse effect on the price of our common stock. Finally, any uncertainties resulting from the initiation and continuation of any litigation could have a material adverse effect on our ability to raise the funds necessary to continue our operations.

In addition, we may indemnify our customers, suppliers and international distributors against claims relating to the infringement of the intellectual property rights of third parties relating to our products, methods, and/or manufacturing processes. Third parties may assert infringement claims against our customers, suppliers, or distributors. These claims may require us to initiate or defend protracted and costly litigation on behalf of our customers, suppliers, or distributors, regardless of the merits of these claims. If any of these claims succeed, we may be forced to pay damages on behalf of our customers, suppliers, or distributors or may be required to obtain licenses for the products they use. If we cannot obtain all necessary licenses on commercially reasonable terms, our customers may be forced to stop using our products, or our suppliers may be forced to stop providing us with products.

We depend on certain technologies that are licensed to us. We do not control these technologies and any loss of our rights to them could prevent us from selling our products.

Our rights to use the technology we license are subject to compliance with the terms of those licenses. In some cases, we do not control the prosecution, maintenance, or filing of the patents to which we hold licenses, or the enforcement of these patents against third parties. These patents and patent applications are not written by us or our advisors, and we did not have control over the drafting and prosecution. We cannot be certain that drafting and/or prosecution of the licensed patents and patent applications by the licensors have been or will be conducted in compliance with applicable laws and regulations or will result in valid and enforceable patents and other intellectual property rights.

Risks Related to Government Regulation

Our devices and our operations are subject to extensive government regulation and oversight both in the United States and abroad, and our failure to comply with applicable requirements could harm our business.

Certain of our systems are regulated as medical devices subject to extensive regulation in the United States and elsewhere, including by the FDA and its foreign counterparts. The FDA and foreign regulatory agencies regulate, among other things, with respect to medical devices:

The regulations to which we are subject are complex and have tended to become more stringent over time. Regulatory changes could result in restrictions on our ability to carry on or expand our operations, higher than anticipated costs or lower than anticipated sales.

The FDA’s and other regulatory authorities’ policies may change, and additional government regulations may be enacted that could prevent, limit or delay regulatory approval of our products. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may fail to obtain any marketing clearances or approvals, lose any marketing clearance or approval that we may have obtained, and we may not achieve or sustain profitability.

Even after we have obtained the proper regulatory clearance or approval to market a product, we have ongoing responsibilities under the FDA regulations. The failure to comply with applicable regulations could jeopardize our ability to sell our systems and result in enforcement actions such as fines, injunctions, civil penalties, recalls or seizure of products, withdrawal of current clearances, and refusal of future clearances.

Any of these sanctions could result in higher than anticipated costs or lower than anticipated sales and harm our reputation, business, financial condition and results of operations.

We must maintain regulatory approval in foreign jurisdictions in which we plan to market and sell our systems. In the EEA, for example, manufacturers of medical devices need to comply with the Essential Requirements laid down in Annex II to the EU Medical Devices Directive (Council Directive 93/42/EEC) and the MDR which is replacing the EU Medical Devices Directive. Compliance with these requirements is a prerequisite to be able to affix the CE mark to medical devices, without which they cannot be marketed or sold in the EEA. With respect to active implantable medical devices or Class III devices, the manufacturer must conduct clinical studies to obtain the required clinical data, unless reliance on existing clinical data from equivalent devices can be justified. The conduct of clinical studies in the EEA is governed by detailed regulatory obligations. These may include the requirement of prior authorization by the competent authorities of the country in which the study takes place and the requirement to obtain a positive opinion from a competent Ethics Committee. This process can be expensive and time-consuming.

We are subject to restrictions on the indications for which we are permitted to market our products, and any violation of those restrictions, or marketing of systems for off-label uses, could subject us to enforcement action.

Our promotional materials and training methods must comply with FDA and other applicable laws and regulations, including the prohibition of the promotion of off-label use in both the United States and in foreign countries. The use of one of our systems for indications other than those cleared by the FDA or approved by any foreign regulatory body may not effectively treat such conditions, which could harm our reputation in the marketplace among physicians and patients.

If the FDA or any foreign regulatory body determines that our promotional materials or training constitute promotion of an off-label use, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions, including, among other things, the issuance or imposition of an untitled letter, a warning letter, injunction, seizure, refusal to issue new 510(k)s or PMAs, withdrawal of existing 510(k)s or PMAs, refusal to grant export approvals, and civil fines or criminal penalties.

Our systems may cause or contribute to adverse medical events that we are required to report to the FDA, and if we fail to do so, we would be subject to sanctions that could harm our reputation, business, financial condition and results of operations.

The FDA’s medical device reporting regulations require us to report to the FDA when we receive or become aware of information that reasonably suggests that one of our systems may have caused or contributed to a death or serious injury or malfunctioned in a way that, if the malfunction were to recur, it could cause or contribute to a death or serious injury. If we fail to comply with our reporting obligations, the FDA could act, including warning letters, untitled letters, administrative actions, criminal prosecution, imposition of civil monetary penalties, revocation of our device clearance, seizure of our products or delay in clearance of future products.

The FDA, state regulating agencies at times, and foreign regulatory bodies have the authority to require the recall of commercialized products in the event of material deficiencies or defects in design or manufacture of a product or if a product poses an unacceptable risk to health. The FDA’s authority to require a recall must be based on a finding that there is reasonable probability that the device could cause serious injury or death. We may also choose to voluntarily recall a product if any material deficiency is found. A government-mandated or voluntary recall by us could occur because of an unacceptable risk to health, component failures, malfunctions, manufacturing defects, labeling or design deficiencies, packaging defects or other deficiencies or failures to comply with applicable regulations. We have received inquiries from regulatory agencies regarding post-market safety concerns in the past. We cannot assure you that product defects or other errors will not occur in the future. Recalls involving any of our systems could be particularly harmful to our business, financial condition, and results of operations because it is our only product.

If we or our distributors do not obtain and maintain international regulatory registrations or approvals for our systems, our ability to market and sell our systems outside of the United States will be diminished.

Sale of our systems, outside the United States, are subject to foreign regulatory requirements that vary widely from country to country. In addition, the FDA regulates exports of medical devices from the United States. While the regulations of some countries may not impose barriers to marketing and selling certain of our systems or only require notification, others require that we or our distributors obtain the approval of a specified regulatory body. Complying with foreign regulatory requirements, including obtaining registrations or approvals, can be expensive and time-consuming, and we cannot be certain that we or our distributors will receive regulatory approvals in each country in which we plan to market a particular system or that we will be able to do so on a timely basis. The time required to obtain registrations or approvals, if required by other countries, may be longer than that required for the FDA clearance, and requirements for such registrations, clearances, or approvals may significantly differ from FDA requirements. If we modify our systems, we or our distributors may need to apply for additional regulatory approvals or other authorizations before we are permitted to sell the modified product. In addition, we may not continue to meet the quality and safety standards required to maintain the authorizations that we or our distributors have received. If we or our distributors are unable to maintain our authorizations in a particular country, we will no longer be able to sell the applicable product in that country, which could harm our business.

Regulatory clearance or approval by the FDA does not ensure clearance or approval by regulatory authorities in other countries, and clearance or approval by one or more foreign regulatory authorities does not ensure clearance or approval by regulatory authorities in other foreign countries or by the FDA. However, a failure or delay in obtaining regulatory clearance or approval in one country may have a negative effect on the regulatory process in others.

Our ability to continue manufacturing and supplying our products depends on our continued adherence to ongoing FDA and other foreign regulatory authority manufacturing requirements.

Our manufacturing processes and facilities are required to comply with the quality management system regulations of its target markets (i.e., the QSR, ISO 13485:2016, and the MDSAP). Adherence to quality management system regulations and the effectiveness of our quality management control systems are periodically assessed through internal audits and inspections of manufacturing facilities by regulatory authorities. Failure to comply with applicable quality management system requirements, or later discovery of previously unknown problems with our products or manufacturing processes, including our failure or the failure of our third-party manufacturer to take satisfactory corrective action in response to an adverse quality system inspection, can result in enforcement action, which could have an adverse effect on our business. Our manufacturing process and facilities are audited annually for compliance with the last editions of QSR, ISO13485 and MDSAP requirements. Regulating agencies, including the FDA, foreign regulatory authorities, and our notified body can institute a wide variety of enforcement actions, ranging from inspectional observations to more severe sanctions such as:

If any of these actions were to occur, it would harm our reputation and cause our system sales and profitability to suffer and may prevent us from generating revenue. Furthermore, our key component suppliers may not currently be or may not continue to be in compliance with all applicable regulatory requirements, which could result in the failure to produce our devices on a timely basis and in the required quantities, if at all.

Risks Related to Our Operations in Israel

We conduct a significant portion of our operations in Israel and therefore our business, financial condition and results of operations may be adversely affected by political, economic and military conditions in Israel.

Our research and development facilities and key third-party suppliers are located in northern Israel, and some of our key employees are residents of Israel. Accordingly, political, economic and military conditions in Israel may directly affect our business.

Any hostilities, armed conflicts, terrorist activities or political instability involving Israel or the interruption or curtailment of trade within Israel or between Israel and its trading partners could adversely affect business conditions and have a material adverse effect on our business, financial condition and results of operations and could make it more difficult for us to raise capital. In addition, hostilities, armed conflicts, terrorist activities or political instability involving Israel could have a material adverse effect on our facilities including our corporate administrative office or on the facilities of our local suppliers, in which event all or a portion of our inventory may be damaged and our ability to deliver products to customers could be significantly delayed.

Several countries, principally in the Middle East, restrict doing business with Israel and Israeli companies, and additional countries may impose restrictions on doing business with Israel and Israeli companies whether as a result of hostilities in the region or otherwise. While these restrictions are loosening and countries previously barred from doing business with Israel are eliminating these restrictions, to the extent they still exist, these restrictions may limit our revenues.

Conditions in the Middle East, including the October 2023 attack by Hamas and other terrorist organizations on Israel and Israel’s war against them, may adversely affect our operations and limit our ability to manage and market our products, which could lead to a decrease in revenues.

Certain of our operations are conducted in Israel and a number of our employees, contract manufacturers and consultants, including employees of our service providers, are located in Israel. As such, our business and operations may be directly affected by economic, political, geopolitical and military conditions affecting Israel.

On October 7, 2023, Hamas militants and members of other terrorist organizations infiltrated Israel’s southern border from the Gaza Strip and conducted a series of terror attacks on civilian and military targets. Thereafter, these terrorists launched extensive rocket attacks on the Israeli population and industrial centers located along the Israeli border with the Gaza Strip. Shortly following the attack, Israel’s security cabinet declared war against Hamas. While a proposed armistice and hostages/prisoners exchange to end the Israel-Hamas war was agreed to by Israel and Hamas on January 15, 2025, and came into effect on January 19, 2025, the intensity, duration and impact of Israel’s current war against Hamas and the corresponding geopolitical instability in the region is difficult to predict, as are the war’s economic implications on the Company’s business and operations.

Additionally, political uprisings, social unrest and violence in various other countries in the Middle East, including Israel’s neighboring countries Syria, Lebanon, Egypt and Jordan, are affecting the political stability of those countries. This instability may lead to deterioration of the political relationships that exist between Israel and certain countries and have raised concerns regarding security in the region and the potential for armed conflict. Iran is also believed to have a strong influence over various proxy militias across the Middle East, and among the Syrian government, Hamas and Hezbollah, in addition to its readiness to engage in conflict with Israel directly. These situations may potentially escalate in the future into more violent events which may affect Israel and us. These situations, including conflicts which involved missile strikes against civilian and military targets in various parts of Israel may negatively impact the Company’s operations in Israel.

Our facilities are within the range of rockets that have been launched from surrounding territories, though none of our operations or those of our manufacturers have been impacted to date. In the event that our facilities in Israel, or the facilities of our vendors in Israel, are damaged as a result of the hostilities or hostilities otherwise disrupt the ongoing operation of our facilities, our ability to deliver products to customers in a timely manner to meet our contractual obligations with customers and vendors could be materially and adversely affected. Any losses or damages incurred by us could have a material adverse effect on our business.

Our insurance does not cover losses that may occur as a result of an event associated with the security situation in the Middle East or for any resulting disruption in our operations. Although the Israeli government has in the past covered the reinstatement value of direct damages that were caused by terrorist attacks or acts of war, we cannot be assured that this government coverage will be maintained or, if maintained, will be sufficient to compensate us fully for damages incurred and the government may cease providing such coverage or the coverage might not suffice to cover potential damages. Any losses or damages incurred by us could have a material adverse effect on our business.

Our operations may be disrupted because of the obligation of Israeli citizens to perform military service.

As a result of the Israeli security cabinet’s decision to declare war against Hamas, Israeli reservists have been drafted to perform immediate military service. Certain of our employees and consultants in Israel, in addition to employees of our service providers located in Israel, have been called for service in the current war with Hamas as of the date of this Annual Report, and such persons may be absent for an extended period of time. As a result, our operations may be disrupted by such absences, which may materially and adversely affect our business and results of operations. Additionally, the absence of employees of our Israeli suppliers and contract manufacturers due to their military service in the current war or future wars or other armed conflicts may disrupt their operations, in which event our ability to deliver products to customers may be materially and adversely affected.

Risks Related to Our Common Stock

We may not be able to maintain our listing on The Nasdaq Capital Market and it may become more difficult to sell our stock in the public market.

Minimum Stockholder Equity Requirement

On May 31, 2023, we received a notice (the “Notice”) from Nasdaq stating that our stockholders’ equity as reported in our Quarterly Report on Form 10-Q for the period ended March 31, 2023 was below the minimum $2,500,000 required for continued listing under Nasdaq Listing Rule 5550(b)(1) (“Minimum Equity Requirement”).

The Notice had no immediate effect on the listing of our common stock. On July 17, 2023, we submitted to Nasdaq a plan to regain compliance with the Minimum Equity Requirement (the "Plan"). On July 28, 2023, Nasdaq granted us an extension until November 27, 2023 to evidence compliance with the Minimum Equity Requirement, conditioned upon our achievement of certain milestones as set forth in the Plan. On November 28, 2023, the Company received a written notice from the Nasdaq Staff which described its determination that the Company had not regained compliance with the Minimum Equity Requirement within the Plan period. As a result, the Nasdaq Staff advised the Company that its securities will be delisted at the opening of business on December 7, 2023, unless the Company timely requests a hearing before a Nasdaq Hearings Panel (the "Panel”).

On December 5, 2023, the Company timely requested a hearing before the Panel. The hearing was held on March 5, 2024, staying any delisting pending the issuance of the Panel’s decision.

On March 20, 2024, the Company received a decision from the Panel granting its request for continued listing on the Nasdaq Capital Market, subject to the Company demonstrating compliance with Nasdaq Listing Rule 5550(b) on or before May 28, 2024, and certain other conditions.

On June 4, 2024, the Company was formally notified by Nasdaq that the Company had regained compliance with the stockholders’ equity Minimum Equity Requirement.

The Company is subject to a “Mandatory Panel Monitor,” as defined in Nasdaq Listing Rule 5815(d)(4)(B), through June 4, 2025. If the Company is found to be noncompliant with the Minimum Equity Requirement within the monitoring period, the Company would not be allowed to provide the Nasdaq Listing Qualifications Staff with a plan to regain compliance with the Minimum Equity Requirement; rather, the Nasdaq Listing Qualifications Staff would be required to issue a delist determination. In such case, the Company would have the opportunity to request a new hearing before the Panel, which request would stay any further action by the Nasdaq Listing Qualifications Staff until the time of the hearing.

Minimum Bid Price Requirement

On April 11, 2024, the Company received a notice from Nasdaq stating that for 32 consecutive business days the Company’s common stock did not maintain a minimum closing bid price of $1.00 per share as required for continued listing under Listing Rule 5550(a)(2).

In accordance with Nasdaq Listing Rule 5810(c)(3)(A), the Company has 180 calendar days, or until the Initial Compliance Date, to regain compliance with the Minimum Bid Price Requirement. The Company did not regain compliance with the Bid Price Requirement by the Initial Compliance Date.

On October 17, 2024, Nasdaq notified the Company that it is eligible for an additional 180 calendar day period, or until the Extended Compliance Date, to regain compliance with the Bid Price Requirement. If, at any time before the Extended Compliance Date, the bid price for the Company’s common stock closes at $1.00 or more for a minimum of 10 consecutive business days as required under the Compliance Period Rule, the Staff will provide written notification to the Company that it complies with the Bid Price Requirement, unless the Staff exercises its discretion to extend this 10 day period pursuant to Nasdaq Listing Rule 5810(c)(3)(H).

On March 3, 2025, the Company effected a 1-for-11 reverse stock split (the “Reverse Stock Split”) of the Company’s issued and outstanding common stock, par value $0.0001 per share by the filing of a Certificate of Amendment of Certificate of Incorporation with the Secretary of State of the State of Delaware pursuant to the Delaware General Corporation Law. The Reverse Stock Split became effective at 5:00 p.m. Eastern Time on March 3, 2025, and began trading on a Reverse Stock Split-adjusted basis as of the opening of the Nasdaq Capital Market on March 4, 2025. On March 18, 2025, the Company received a notice from Nasdaq stating that the Company had regained compliance with the Bid Price Requirement.

If our common stock ultimately is delisted for failure to comply with the Minimum Bid Price or Minimum Equity Requirement, our shareholders could face significant adverse consequences, including:

The market price of our stock price may be volatile, and you may not be able to resell shares of our common stock at or above the price you paid.

The market price of our common stock could be subject to significant fluctuations. Some of the factors that may cause the market price of the Company’s common stock to fluctuate include:

In addition, the stock markets in general, and the markets for medical device and aesthetic stocks in particular, have experienced extreme volatility that may have been unrelated to the operating performance of the issuer. These broad market fluctuations may adversely affect the market price or liquidity of our common stock.

Under SEC rules, we are a smaller reporting company and we have taken advantage of certain exemptions from disclosure requirements available to smaller reporting companies; this could make our securities less attractive to investors and may make it more difficult to compare our performance with other public companies.

Under SEC rules, we qualify as, a "smaller reporting company". We have taken advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not smaller reporting companies including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404(b) of the Sarbanes-Oxley Act, because of our non-accelerated filer status, and reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements. As a result, stockholders may not have access to certain information they may deem important. We cannot predict whether investors will find our securities less attractive because we rely on these exemptions. If some investors find the securities less attractive as a result of reliance on these exemptions, the trading prices of our securities may be lower than they otherwise would be, there may be a less active trading market for our securities and the trading prices of our securities may be more volatile.

We do not intend to pay dividends on our common stock, and, consequently, our stockholders’ ability to achieve a return on their investment will depend on appreciation in the price of our common stock.

We do not intend to pay any cash dividends on our common stock for the foreseeable future. We intend to invest our future earnings, if any, to fund our growth. Payment of future cash dividends, if any, will be at the discretion of the Board, subject to applicable law and will depend on various factors, including our financial condition, operating results, current and anticipated cash needs, the requirements of current or then-existing debt instruments and other factors the Board deems relevant. Therefore, our stockholders are not likely to receive any dividends on their common stock for the foreseeable future. Since we do not intend to pay dividends, our stockholders’ ability to receive a return on their investment will depend on any future appreciation in the market value of our common stock. There is no guarantee that our common stock will appreciate or even maintain the price at which our stockholders have purchased it. The terms of our credit facilities limit our ability to pay dividends.

Provisions in our charter documents and under Delaware law could make an acquisition more difficult and may discourage any takeover attempts our stockholders may consider favorable, and may lead to entrenchment of management.

Provisions of our amended and restated certificate of incorporation and amended and restated bylaws could delay or prevent changes in control or changes in management without the consent of the Board. These provisions will include the following:

These provisions would apply even if we were to receive an offer that some stockholders may consider beneficial.

We are also subject to the anti-takeover provisions contained in Section 203 of the Delaware General Corporation Law (“Section 203”). Under Section 203, a corporation may not, in general, engage in a business combination with any holder of 15% or more of its capital stock unless the holder has held the stock for three years or, among other exceptions, the Board has approved the transaction.

Our executive officers, directors and certain of our shareholders who are affiliated with our directors will have the ability to control or significantly influence all matters submitted to our stockholders for approval.

As of December 31, 2024, our executive officers, directors and certain of our shareholders who are affiliated with our directors, in the aggregate, beneficially own approximately 25% of our outstanding shares of common stock. As a result, if these stockholders were to choose to act together, they would be able to control or significantly influence all matters submitted to our stockholders for approval, as well as our management and affairs. For example, if they choose to act together, these persons would control or significantly influence the election of directors and approval of any merger, consolidation or sale of all or substantially all of our assets. This concentration of voting power could delay or prevent an acquisition of the Company on terms that other stockholders may desire.

If we sell shares of our common stock in future financings, stockholders may experience immediate dilution and, as a result, our stock price may decline.

We may from time-to-time issue additional shares of common stock at a discount from the current market price of our common stock. As a result, our stockholders would experience immediate dilution upon the purchase of any shares of our common stock sold at such discount. In addition, as opportunities present themselves, we may enter into financing or similar arrangements in the future, including the issuance of debt securities, preferred stock or common stock. If we issue common stock or securities convertible into common stock, our common stockholders would experience additional dilution and, as a result, our stock price may decline.

None.

Our principal executive offices are located at 235 Yorkland Blvd, Suite 900, Toronto, Ontario, Canada. We lease these facilities pursuant to a lease agreement that expires on August 31, 2030. These facilities consist of 15,678 square feet of office space, and 2,134 square feet of warehouse space.

We lease a facility in San Jose, California which hosts our offices, research and development activities, logistics and manufacturing. We lease these facilities pursuant to a lease agreement that expires July 14, 2027. The facilities consist of approximately 30,011 square feet of total space.

We lease a facility in Davie, Florida, which is used to support our logistics and technical support services for our United States operations. We lease these facilities pursuant to a lease agreement that expires November 30, 2025.  The facilities consist of approximately 4,733 square feet of total space.

We also have offices and a research and development center located at 1 Hamelacha Street, Yokne’am Illit 2069200, Israel. We lease these facilities pursuant to a lease agreement that expires on September 30, 2025, with an option to extend the term for an additional 12 months. These facilities consist of approximately 530 square meters of total space.

We believe that our existing facilities are sufficient to meet our current needs.

As of December 31, 2024, the Company was not party to any material active or pending legal proceedings.

We may from time to time continue to be involved in various legal proceedings of a character normally incident to the ordinary course of our business. 

Not applicable.

PART II

Market Information

Our common stock is listed for trading on the Nasdaq Capital Market under the symbol “VERO”.

Holders

As of March 26, 2025, there were 71 holders of record of our common stock. The actual number of stockholders is greater than this number of record holders and includes stockholders who are beneficial owners but whose shares are held in street name by brokers and other nominees.

Dividends

We have never declared or paid cash dividends on our common stock. We currently intend to retain all available earnings, if any, for use in the operation of our business and do not anticipate paying any dividends on our common stock in the foreseeable future. Any future determination related to dividend policy will be made at the discretion of our Board and will depend on our financial condition, operating results, capital requirements, general business conditions and other factors that the Board may deem relevant.

Performance Graph

As a smaller reporting company, we are not required to provide disclosure for this Item.

Recent Sale of Unregistered Securities

None.

Purchase of Equity Securities by the Issuer and Affiliated Purchasers

None.

The following discussion contains management’s discussion and analysis of our financial condition and results of operations and should be read together with the historical consolidated financial statements and the notes thereto included in Part II, Item 8 “Consolidated Financial Statements and Supplementary Data.” This discussion contains forward-looking statements within the meaning of the U.S. Private Securities Litigation Reform Act of 1995 that reflect our plans, estimates and beliefs and involve numerous risks and uncertainties, including but not limited to those described in Part I, Item 1A “Risk Factors” of this Annual Report. Any statements contained in this Annual Report that are not historical facts may be deemed to be forward-looking statements. In some cases, you can identify these statements by words such as such as “anticipates,” “believes,” “plans,” “expects,” “projects,” “future,” “intends,” “may,” “should,” “could,” “estimates,” “predicts,” “potential,” “continue,” “guidance,” and other similar expressions that are predictions of or indicate future events and future trends. These forward-looking statements are based on current expectations, estimates, forecasts, and projections about our business and the industry in which we operate and management's beliefs and assumptions and are not guarantees of future performance or developments and involve known and unknown risks, uncertainties, and other factors that are in some cases beyond our control. As a result, any or all of our forward-looking statements in this Annual Report may turn out to be inaccurate or may differ materially from those contained in any forward-looking statements. You should carefully read “Special Note Regarding Forward-Looking Statements” and Part I, Item 1A, “Risk Factors”. Any forward-looking statement made by us in this Annual Report is based only on information currently available to us and speaks only as of the date on which it is made. We undertake no obligation to publicly update any forward-looking statement, whether written or verbal, that may be made from time to time, whether as a result of new information, future developments or otherwise.

Overview

We are an innovative global medical technology company that develops, commercializes and delivers minimally invasive and non-invasive medical aesthetic and hair restoration technologies and related services. Our systems have been designed on cost-effective, proprietary and flexible platforms that enable us to expand beyond the aesthetic industry’s traditional markets of dermatology and plastic surgery, and into non-traditional markets, including family medicine, general practitioners and aesthetic medical spas. In 2024 and 2023, respectively, a substantial majority of our systems delivered in North America were in non-traditional markets. As we grow our ARTAS hair restoration business and expand robotics offerings through the AI.ME™ platform we expect our penetration into the core practices of dermatology and plastic surgery to increase.

We have had recurring net operating losses and negative cash flows from operations. As of December 31, 2024 and 2023, we had an accumulated deficit of $308.9 million and $261.9 million, respectively. Until we generate revenue at a level to support our cost structure, we expect to continue to incur substantial operating losses and negative cash flows from operations. In order to continue our operations, we must achieve profitability and/or obtain additional equity investment or debt financing. Until we achieve profitability, we plan to fund our operations and capital expenditures with cash on hand, borrowings and issuances of capital stock. As of December 31, 2024 and 2023, we had cash and cash equivalents of $4.3 million and $5.4 million, respectively. 

The global economy, including the financial and credit markets, has recently experienced extreme volatility and disruption, including increases to inflation rates, rising interest rates, foreign currency impacts and declines in consumer confidence, and declines in economic growth. All these factors point to uncertainty about economic stability, and the severity and duration of these conditions on our business cannot be predicted. 

On January 24, 2024, the Company announced that the Board has authorized the review of the strategic alternatives with a goal of enhancing stockholder value. There is no set timetable for the strategic review process and there can be no assurance that such review will result in any transaction or other alternative or the terms and conditions of any transaction or other alternative.

Equity Purchase Agreement with Lincoln Park

On June 16, 2020, we entered into the Equity Purchase Agreement with Lincoln Park Capital Fund LLC ("Lincoln Park") which provided that, upon the terms and subject to the conditions and limitations set forth therein, we may sell to Lincoln Park up to $31.0 million of shares of our common stock pursuant to our shelf registration statement. The purchase price of shares of common stock related to a future sale was based on the then prevailing market prices of such shares at the time of sales as described in the Equity Purchase Agreement. Concurrently with entering into the Equity Purchase Agreement, we also entered into the Registration Rights Agreement. During the year ended December 31, 2022, we sold to Lincoln Park 0.003 million shares of our common stock under the Equity Purchase Agreement, at which point this agreement expired. The net cash proceeds from shares issuance as of December 31, 2022 were $0.3 million. The Equity Purchase Agreement expired on July 1, 2022.

On July 12, 2022, we entered into the 2022 LPC Purchase Agreement with Lincoln Park, and we issued and sold to Lincoln Park 0.004 million shares of our common stock as a commitment fee in connection with entering into the 2022 LPC Purchase Agreement, with the total value of $0.3 million. Subsequent to execution of the 2022 LPC Purchase Agreement the Company issued approximately 39.5 thousand shares of common stock to Lincoln Park at an average price of $49.94 per share, for a total value of $1.97 million through December 31, 2022. During the twelve months ended December 31, 2023, the Company issued an additional 31.1 thousand shares of common stock to Lincoln Park at an average price of $35.53 per share, for a total value of $1.1 million. During 2024, the Company issued an additional 758 shares of common stock to Lincoln Park at an average price of $12.76 per share, for a total value of $10. The 2022 LPC Purchase Agreement expired on August 1, 2024. For additional information regarding the 2022 LPC Purchase Agreement, see Note 15 “Stockholders' Equity” in the notes to our consolidated financial statements included elsewhere in this report.

The 2022 Private Placement

In November 2022, we entered into a securities purchase agreement with certain investors (collectively, the "2022 Investors") pursuant to which the Company issued and sold to the 2022 Investors an aggregate of 10,608 shares of common stock, par value $0.0001 per share, and 3,185,000 shares of voting convertible preferred stock, par value $0.0001 per share (the "Voting Preferred Stock"), which are convertible into 193,014 shares of common stock upon receipt of a valid conversion notice from a 2022 Investor or at the option of the Company within 30 days following the occurrence of certain events (the "2022 Private Placement"). The 2022 Private Placement was completed on November 18, 2022. The gross proceeds from the securities sold in the 2022 Private Placement totaled $6.7 million before offering expenses. The costs incurred with respect to the 2022 Private Placement totaled $0.2 million and were recorded as a reduction of the 2022 Private Placement proceeds in the consolidated statements of stockholders’ equity. The accounting effects of the 2022 Private Placement transaction are discussed in Note 15 "Stockholders' Equity" in the notes to our consolidated financial statements included elsewhere in this report.

The 2023 Multi-Tranche Private Placement

In May 2023, we entered into a securities purchase agreement (the "2023 Multi-Tranche Private Placement Stock Purchase Agreement") with certain investors (collectively, the "2023 Investors") pursuant to which the Company may issue and sell to the 2023 Investors up to $9,000,000 in shares (the "2023 Multi-Tranche Private Placement") of newly-created senior convertible preferred stock, par value $0.0001 per share (the "Senior Preferred Stock"), in multiple tranches from time to time until December 31, 2025, subject to a minimum aggregate purchase amount of $0.5 million in each tranche. The initial sale in the 2023 Multi-Tranche Private Placement occurred on May 15, 2023, under which the Company sold the 2023 Investors 280,899 shares of Senior Preferred Stock for an aggregate purchase price of $2.0 million (the "Initial Placement").

On July 6, 2023, the Company and the 2023 Investors entered into an amendment to the 2023 Multi-Tranche Private Placement Stock Purchase Agreement (the "Multi-Tranche Amendment"). The Multi-Tranche Amendment (a) clarifies the appropriate date pursuant to which the purchase price for each share of Senior Preferred Stock to be sold in the Private Placement is determined (such that the purchase price shall be equal to the “Minimum Price” as set forth in Nasdaq Listing Rule 5635(d)) and (b) permits the Company to specify a desired closing date (subject to approval by the 2023 Investors) for each sale in the 2023 Multi-Tranche Private Placement. 

On July 12, 2023, the Company and the 2023 Investors consummated the second tranche in the 2023 Multi-Tranche Private Placement, under which the Company sold the 2023 Investors 500,000 shares of Senior Preferred Stock for an aggregate purchase price of $2.0 million (the "Second Placement").

On September 8, 2023, the Company and the 2023 Investors consummated the third tranche in the 2023 Multi-Tranche Private Placement, under which the Company sold the 2023 Investors 292,398 shares of Senior Preferred Stock for an aggregate purchase price of $1.0 million (the "Third Placement").

On October 20, 2023, the Company and the 2023 Investors consummated the fourth tranche in the 2023 Multi-Tranche Private Placement, under which the Company sold the 2023 Investors 502,513 shares of Senior Preferred Stock for an aggregate purchase price of $2.0 million (the "Fourth Placement", and together with the First Placement, Second Placement and Third Placement, the "Placements").

The Company used the proceeds of the Placements, after the payment of transaction expenses, for general working capital purposes. The accounting effects of the 2023 Multi-Tranche Private Placement transaction are discussed in Note 15 "Stockholders' Equity" in the notes to our consolidated financial statements included elsewhere in this report.

Series X Convertible Preferred Stock

On October 4, 2023, the Company entered into an Exchange Agreement (the "2023 Exchange Agreement") with the Madryn Noteholders, pursuant to which the Madryn Noteholders agreed to exchange $26,695,110.58 in aggregate principal amount outstanding under the Notes for (i) $22,791,748.32 in aggregate principal amount of new secured convertible notes of the Company and (ii) 248,755 shares of newly-created convertible preferred stock of the Company, par value $0.0001 per share designated as "Series X Convertible Preferred Stock." The transaction is discussed in Note 15 "Stockholders Equity" in the notes to our consolidated financial statements included elsewhere in this report.

Registered Direct Offering

On February 22, 2024, the Company, entered into a securities purchase agreement (the "SPA") with certain institutional investors (each, a "2024 Investor"), pursuant to which the Company agreed to issue and sell to the 2024 Investors (i) in a registered direct offering, an aggregate of 74,342 shares of the Company’s common stock, at a price of $16.115 per share and (ii) in a concurrent private placement, warrants to acquire up to an aggregate of 74,342 shares of Common Stock (the "2024 Investor Warrants"), at an initial exercise price of $14.74 per share (the "Offering"). The transaction is discussed in Note 15 "Stockholders' Equity" in the notes to our consolidated financial statements included elsewhere in this report.

Madryn Loan and Security Agreement

On April 23, 2024, the Company entered into a Loan and Security Agreement (the "Loan and Security Agreement"), by and among Venus USA (the "Bridge Borrower"), Venus Canada, Venus Ltd. (Venus Ltd., together with the Company and Venus Canada, the "2024 Guarantors", and together with the Bridge Borrower, the "Bridge Financing Loan Parties") and, each lender party thereto (collectively, the "2024 Lenders") and Madryn Health Partners, LP, as administrative agent. Pursuant to the Loan and Security Agreement, the 2024 Lenders agreed to provide the Bridge Borrower with bridge financing in the form of a term loan in the original principal amount of $2.2 million and one or more delayed draw term loans of up to an additional principal amount of $2.8 million (the "Bridge Financing"). The Bridge Financing originally had a maturity date of May 26, 2024. Pursuant to the Loan and Security Agreement, each of the 2024 Guarantors, jointly and severally, guarantee, that the Obligations (as defined in the Loan and Security Agreement) will be performed and paid in full when due and payable.

On July 26, 2024, September 11, 2024, and November 1, 2024 additional delayed draws in the amounts of $1.0 million were made, respectively. On November 26, 2024, an additional delayed draw of $1.2 million was made, and on December 9, 2024, an additional delayed draw of $1.5 million was made, for a total drawdown as of December 31, 2024 of $7.9 million.

From May 24, 2024 through December 31, 2024 the Loan Parties entered into Bridge Financing Amendments Two through Ten, which among other things, extended the maturity date to January 31, 2025, increased the delayed draw commitment from $2.8 million to $6.0 million, made interest payments payable-in-kind, deleted the net loss covenant, and granted relief from minimum liquidity requirements. These amendments are discussed in Note 11 "Madryn Debt and Convertible Notes" in the notes to our consolidated financial statements included elsewhere in this report.

2024 Exchange Agreements and Series Y Convertible Preferred Stock Issuance

On May 24, 2024, the Company entered into an exchange agreement, by and among the Company, Venus USA, and Madryn (the "2024 Exchange Agreement") whereby the Company exchanged $52,142 in aggregate principal amount outstanding under the MSLP Loan Agreement for $17,142 in aggregate principal of new secured notes (“New Secured Notes”) and 576,986 shares of newly-created convertible preferred stock of the Company, designated as "Series Y Convertible Preferred Stock." The Series Y Convertible Preferred Stock is priced at $667.26 per share, being equal to the product of (i) the average closing price (as reflected on Nasdaq.com) of the Company's common stock for the five trading days immediately preceding date of the 2024 Exchange Agreement, multiplied by (ii) 9.0909. The New Secured Notes follow the same terms as the MSLP Loan Agreement. As part of the extinguishment of principal, the Company recognized a $10.9 million non-cash loss.   

On September 26, 2024, the Company entered into an Exchange Agreement, by and among the Company, Venus USA, and Madryn (the "Second 2024 Exchange Agreement") whereby the Company exchanged $17,662 of the balance outstanding under the MSLP Loan Agreement for $2,662 in aggregate principal amount outstanding under the MSLP Loan Agreement and 203,583 shares of Series Y Convertible Preferred Stock. As part of the extinguishment of principal, the Company recognized a $0.5 million non-cash loss. Also, on September 26, 2024 the Loan Parties entered into a Third Loan Amendment which, among other things, (i) modify the October 2024 interest payment to be payable-in-kind, (ii) delete the net loss covenant, and (iii) grant relief from minimum liquidity requirements.

The transactions are discussed in Note 15 "Stockholders' Equity" in the notes to our consolidated financial statements included elsewhere in this report.

Products and Services

We derive revenue from the sale of products and services. Product revenue includes revenue from the following:

Service revenue includes revenue derived from our extended warranty service contracts provided to our existing customers.

Systems are sold through contracts directly, through our internal financing programs and through distributors. In the third quarter of 2022 we commenced an initiative to reduce our reliance on system sales sold under subscription agreements in the United States. This strategic shift is designed to improve cash generation and reduce our exposure to defaults and increased bad debt expense given the increasingly challenging economic environment caused by the coexistence of high inflation and high interest rates.

We generate revenue from traditional system sales and from sales under our internal financing programs, which are available to customers in North America and select international markets. Approximately 26% and 33% of our system revenues were derived from our internal financing programs in the year ended December 31, 2024 and 2023, respectively. We currently do not offer the ARTAS iX system under our internal financing programs.

In January 2024, the Company launched its new Venus Prime program which is a structured in-house financing program replacing its legacy subscription program for customers in North America. Under our Venus Prime program, select customers can qualify for competitive financing rates and continue to benefit from the payment flexibility afforded by our previous subscription financing program when purchasing our aesthetic medical devices, as well as a seamless technology upgrade program made available to our customers in years 2 and 3 of ownership.

Like our legacy subscription model, Venus Prime includes an up-front fee and a monthly payment schedule, typically over a period of 36 months, with approximately 40% to 45% of total contract payments collected in the first year. To ensure that each monthly payment is made on time and that the customer’s system is serviced in accordance with the terms of the warranty, every product purchased under Venus Prime requires a monthly activation code, which we provide to the customer upon receipt of the monthly payment. These recurring monthly payments provide our customers with enhanced financial transparency and predictability. This structure can provide greater flexibility than traditional equipment leases secured through financing companies. We work closely with our customers to provide business recommendations that improve the quality-of-service outcomes, build patient traffic and improve financial returns for the customer’s business.

We have developed and received regulatory clearance for twelve novel aesthetic technology platforms, including our ARTAS and NeoGraft systems. We believe our ARTAS and NeoGraft systems are complementary and give us a hair restoration product offering that can serve a broad segment of the market. Our medical aesthetic technology platforms have received regulatory clearance for a variety of indications, including treatment of facial wrinkles in certain skin types, temporary reduction of appearance of cellulite, non-invasive fat reduction (lipolysis) in the abdomen and flanks for certain body types and relief of minor muscle aches and pains in jurisdictions around the world. In addition, our technology pipeline is heavily focused on improving and enhancing our current technologies, products, and services and the development of robotically assisted minimally invasive solutions for aesthetic procedures that are primarily treated by surgical intervention, including the AI.ME platform for which we received FDA 510(k) clearance for fractional skin resurfacing in December 2022.

In the United States, we have obtained 510(k) clearance from the FDA for our Venus Viva, Venus Viva MD, Venus Legacy, Venus Versa, Venus Versa Pro, Venus Velocity, Venus Bliss, Venus Bliss Max, Venus Epileve, Venus Fiore, ARTAS, ARTAS iX and AI.ME systems. Outside the United States, we market our technologies in over 40 countries across Europe, the Middle East, Africa, Asia-Pacific and Latin America. Because each country has its own regulatory scheme and clearance process, not every device is cleared or authorized for the same indications in each market in which a particular system is marketed.

As of December 31, 2024, we operated directly in 12 international markets through our 10 direct offices in the United States, Canada, Japan, Mexico, Spain, Germany, Australia, China, Hong Kong, and Israel. 

Our revenues for the year ended December 31, 2024, and 2023 were $64.8 million and $76.4 million, respectively. We had a net loss attributable to the Company of $47.0 million and $37.1 million in the year ended December 31, 2024, and 2023, respectively. We had an Adjusted EBITDA loss of $21.2 million and $20.3 million for the year ended December 31, 2024, and 2023, respectively. 

Use of Non-GAAP Financial Measures

Adjusted EBITDA is a non-GAAP measure defined as net income (loss) before foreign exchange loss (gain), financial expenses, income tax expense (benefit), depreciation and amortization, stock-based compensation and non-recurring items for a given period. Adjusted EBITDA is not a measure of our financial performance under U.S. GAAP and should not be considered an alternative to net income or any other performance measures derived in accordance with U.S. GAAP. Accordingly, you should consider Adjusted EBITDA along with other financial performance measures, including net income, and our financial results presented in accordance with U.S. GAAP. Other companies, including companies in our industry, may calculate Adjusted EBITDA differently or not at all, which reduces its usefulness as a comparative measure. We understand that although Adjusted EBITDA is frequently used by securities analysts, lenders and others in their evaluation of companies, Adjusted EBITDA has limitations as an analytical tool, and you should not consider it in isolation, or as a substitute for analysis of our results as reported under U.S. GAAP. Some of these limitations are: Adjusted EBITDA does not reflect our cash expenditures or future requirements for capital expenditures or contractual commitments; Adjusted EBITDA does not reflect changes in, or cash requirements for, our working capital needs; and although depreciation and amortization are non-cash charges, the assets being depreciated will often have to be replaced in the future, and Adjusted EBITDA does not reflect any cash requirements for such replacements.

We believe that Adjusted EBITDA is a useful measure for analyzing the performance of our core business because it facilitates operating performance comparisons from period to period and company to company by backing out potential differences caused by changes in foreign exchange rates that impact financial assets and liabilities denominated in currencies other than the U.S. dollar, tax positions (such as the impact on periods or companies of changes in effective tax rates), the age and book depreciation of fixed assets (affecting relative depreciation expense), amortization of intangible assets, stock-based compensation expense (because it is a non-cash expense) and non-recurring items as explained below.

The following is a reconciliation of net loss to Adjusted EBITDA for the years presented:

Venus Concept Inc.

Reconciliation of Net loss to Non-GAAP Adjusted EBITDA

⁽¹⁾ For the years ended December 31, 2024 and December 31, 2023, the other adjustments are represented by restructuring activities designed to improve the Company's operations and cost structure. 

Key Factors Impacting Our Results of Operations

Our results of operations are impacted by several factors, but we consider the following to be particularly significant to our business:

Number of systems delivered. The majority of our revenue is generated from the delivery of systems, both under traditional sales contracts and internal financing programs. The following table sets forth the number of systems we have delivered in the geographic regions indicated:

Mix between traditional sales, distributor sales, and sales made under our internal financing programs. We deliver systems through (1) traditional direct system sales contracts to customers, (2) our internal financing programs, and (3) system sales through distribution agreements. Unit deliveries under direct system sales contracts and internally financed sales have higher per unit revenues and gross margins, while revenues and gross margins on systems sold through distributors are lower. However, distributor sales do not require significant sales and marketing support as these expenses are borne by the distributors. In addition, while traditional system sales and internally financed sales have similar gross margins, cash collections on sales financed under our internal financing programs generally occur over a three-year period, with approximately 40% to 45% collected in the first year and the balance collected evenly over the remaining two years of the agreement. In the third quarter of 2022 we commenced an initiative to reduce our reliance on system sales sold under our internal financing programs in the United States. This strategic shift is designed to improve cash generation and reduce our exposure to defaults and increased bad debt expense given the increasingly challenging economic environment caused by the coexistence of high inflation and high interest rates.

Investment in Sales, Marketing and Operations. In recent years, we made a strategic decision to penetrate the global market by investing in sales and marketing expenses across all geographic segments. This included the opening of direct offices and hiring experienced sales, marketing, and operational staff. While we generated incremental product sales in these new markets, these revenues and the related margins did not fully offset the startup investments made in certain countries. We continue to evaluate our profitability and growth prospects in these countries and have taken and will continue to take steps to exit countries which we do not believe will produce sustainable results. Since June 2020 we have ceased direct sales operations in 13 countries across Europe, Asia Pacific, Latin America and Africa and have increased our investment and focus in the United States market.

In the years ended December 31, 2024 and 2023, respectively, we did not open any direct sales offices.

Bad Debt Expense. We maintain an allowance for expected credit losses for estimated losses that may primarily arise from customers who purchased our products under our internal financing programs who are unable to make the remaining payments required under their agreements. We continue to focus our selling efforts on cash sales and internal financing customers with a stronger credit profile, thereby reducing our exposure to credit losses. In the year ended December 31, 2024, we incurred bad debt expense of $1.4 million consistent to a bad debt expense of $1.4 million in the year ended December 31, 2023. As of December 31, 2024, our allowance for expected credit losses stands at $3.8 million which represents 12.2% of the gross outstanding accounts receivable as of this date.

Outlook

The global economy, including the financial and credit markets, has recently experienced extreme volatility and disruption, including increases to inflation rates, rising interest rates, foreign currency impacts, declines in consumer confidence, and a challenging growth environment. In addition, we face uncertainty with respect to the tariffs, if any, the new U.S. Federal administration will levy on goods imported from China, Mexico, Canada and other international jurisdictions. All these factors point to uncertainty about economic stability, and the severity and duration of these conditions on our business cannot be predicted. The bulk of the revenue decline in the year ended December 31, 2024 was due to a significant tightening in credit markets in the U.S. and international markets due to higher interest rates, impacting our customers' ability and/or desire to secure capital equipment financing. In addition, our international results were negatively affected by an acceleration of our international strategy to wind down underperforming countries as we continued to transition to third party distributors. We continue to focus on quality of revenue and despite the revenue decline, our cash used in operations was $1.8 million lower, or 13.9% than the same period in 2023. On a positive note, the Federal Reserve Board (Fed), the European Central Bank, the Swiss National Bank and the Bank of Canada all recently reduced interest rates in an effort to reduce the degree of restrictiveness in monetary policy, and signaling future rate cuts over the near term. We remain focused on adapting to the challenges presented by the current macro-economic environment, as well as the opportunities presented by an easing of monetary policy.

Israel – Hamas conflict. Following the October 7, 2023 attack by Hamas on Israeli citizens and the declaration of war that followed, we have taken steps to mitigate exposure to risks related to our Israeli operations, the risks of which are further described in Item 1A. Risk Factors – Risks Related to Our Operations in Israel of this Annual Report. These efforts include but are not limited to, working with our contract manufacturers to accelerate inventory build, contingency planning with respect to alternative manufacturing sites within their network, and relocating larger amounts of finished goods to warehouses in North America to protect our ability to distribute products. Alongside the Company's continuity plan, we maintain daily contact with our employees in Israel and have instituted a wellness program designed to provide access to healthcare practitioners/consultants for short term counselling for colleagues and family members in order to provide assistance during the conflict.

Supply chain. We did not experience significant supply issues during the year ended December 31, 2024 as we continue to actively work with our suppliers and third-party manufacturers to mitigate supply issues and build inventory of key component parts. We anticipate some supply challenges in 2025, due to geopolitical disruption in the middle east impacting shipping lanes, deliveries of materials and component parts, impacting production lead times that may impact our ability to manufacture the number of systems required to meet customer demand. In addition, since the second quarter of 2021 we have experienced significant inflationary pressures throughout our supply chain, which may continue into 2025. We also face uncertainty with respect to the tariffs, if any, the new U.S. Federal administration will levy on goods imported from China, Mexico, Canada and other international jurisdictions. We expect to mitigate such pressures, where possible, through price increases and margin management.

Global economic conditions. General global economic downturns and macroeconomic trends, including heightened inflation, capital markets volatility, interest rate and currency rate fluctuations, the threat of tariffs, and economic slowdowns, have resulted and may continue to result in unfavorable conditions that negatively affect demand for our products and exacerbate some of the other risks that affect our business, financial condition and results of operations. Both domestic and international markets experienced significant inflationary pressures in fiscal year 2024. While inflation rates in the U.S., as well as in other countries in which we operate, are showing signs of moderation, the impact of such successive increases on cost structures remains, affecting governments, corporations and small businesses alike. Our customers have also been affected by higher inflation and higher interest rates, impacting their ability to secure third party financing or causing many of them to delay capital purchases due to high interest rates. As noted above, the Federal Reserve in the U.S. and other central banks in various countries have commenced a cycle of interest rate reductions in response to concerns about inflation and stagnant growth.

Sales markets. We are a global business, having established a commercial presence in more than 60 countries during our history. While the continued post-pandemic recovery remains challenging due to the coexistence of high inflation and high interest rates, we continue to evaluate our direct operations, particularly those outside of North America.

Accounts receivable collections. We remain fully focused on our revised credit screening practices and thereby reducing bad debt expenses. As of December 31, 2024, our allowance for expected credit losses stands at $3.8 million, which represents 12.2% of the gross outstanding accounts receivable as of that date. This represents a significant decrease of $3.6 million from our December 31, 2023 allowance for expected credit losses balance of $7.4 million.

Foreign exchange fluctuations. We are primarily exposed to foreign exchange risk with respect to revenues generated outside of the United States denominated in NIS, Euro, CAD, British pound, Australian dollar, Chinese renminbi, Hong Kong dollar, Japanese yen, Argentina peso, Colombian peso, and Mexican peso. We manage our foreign currency exposures on a consolidated basis, which allows us to net exposures and take advantage of any natural offsets. We do not hedge our entire foreign exchange exposure and are still subject to earnings and stockholders' equity volatility relating to foreign exchange risk. Financial market and currency volatility may limit our ability to cost-effectively hedge these exposures. Post the U.S. federal election in November of 2024, most currencies depreciated versus the U.S. dollar, resulting in a $1 million foreign exchange loss in the fourth quarter alone.

Basis of Presentation

Revenues

We generate revenue from sales of systems through our internal financing programs, traditional system sales to customers and distributors, other product revenues from the sale of ARTAS kits, Viva tips, other consumables, marketing supplies, and service revenue from our extended warranty service contracts provided to existing customers.

System Revenue

For the years ended December 31, 2024 and 2023, approximately 26% and 33%, respectively, of our total system revenues were derived from our internal financing programs. The relative decrease in internal financing program revenues in 2024 is in line with our strategy to prioritize cash deals over internal financing program deals in order to improve cash generation and preserve liquidity. Our internal financing programs are designed to provide a low barrier to ownership of our systems and includes an up-front fee followed by monthly payments, typically over a 36-month period. The up-front fee serves as a down payment. For accounting purposes, these arrangements are considered to be sales-type finance leases, where the present value of all cash flows to be received under the agreement is recognized as revenue upon shipment to the customer and achievement of the required revenue recognition criteria.

For the years ended December 31, 2024 and 2023, approximately 61% and 59%, respectively, of our total system revenues were derived from traditional sales. The increased focus on traditional sales is in line with our strategy to prioritize cash deals over internal lease program deals in order to improve cash generation and preserve liquidity.

Customers generally demand higher discounts in connection with traditional sales. We recognize revenues from products sold to customers based on the following five steps: (1) identification of the contract(s) with the customer; (2) identification of the performance obligations in the contract; (3) determination of the transaction price; (4) allocation of the transaction price to the separate performance obligations in the contract; and (5) recognition of revenue when (or as) the entity satisfies a performance obligation.

We do not grant rights of return or early termination rights to our customers under either our traditional sales or internal financing programs. These traditional sales are generally made through our sales team in the countries in which the team operates.

For the years ended December 31, 2024 and 2023, approximately 13% and 8% of our total system revenues were derived from distributor sales. Under the traditional distributor relationship, we do not sell directly to the end customer and, accordingly, achieve a lower overall margin on each system sold compared to our direct sales. These sales are non-refundable, non-returnable and without any rights of price protection or stock rotation. Accordingly, we consider distributors as end customers, and are accounted for using the sell-in method.

Procedure Based Revenue

We generate revenue from the harvesting, site making, and implantation procedures performed with our ARTAS system. The harvesting procedure, as the name suggests, is the act of harvesting hair follicles from the patient’s scalp for implantation in the prescribed areas. To perform these procedures, a disposable clinical kit is required. These kits can be large (with an unlimited number of harvests) or small (with a maximum of 1,100 harvests). The customer must place an online order with us for the number and type of kits desired and make a payment. Upon receipt of the order and the related payment, we ship the kit(s), and the customer must scan the barcode on the kit label in order to perform the procedure. Once the kits are exhausted, the customer must purchase additional kits. The site making procedure uses the ARTAS system to create a recipient site (i.e., site making) in the patient’s scalp affected by androgenic alopecia (or male pattern baldness). The site making procedure also requires a disposable site making kit. The site making kits are sold to customers in the same manner as the kits for harvesting procedures. The implantation procedure utilizes the same disposal kit that is used for site making and involves immediately implanting follicles into the created recipient site. The implantation kits are sold to customers in the same manner as the harvesting and site making kits.

Other Product Revenue

We also generate revenue from our customer base by selling Viva tips, Glide (a cooling/conductive gel which is required for use with many of our systems), marketing supplies and kits, various consumables and disposables, replacement applicators and handpieces, and ARTAS system training.

Service Revenue

We generate ancillary revenue from our existing customers by selling additional services including extended warranty service contracts.

Cost of Goods Sold and Gross Profit

Cost of goods sold consists primarily of costs associated with manufacturing our different systems, including direct product costs from third-party manufacturers, warehousing and storage costs and fulfillment and supply chain costs inclusive of personnel-related costs (primarily salaries, benefits, incentive compensation and stock-based compensation). Cost of goods sold also includes the cost of upgrades, technology amortization, royalty fees, parts, supplies, and cost of product warranties.

Operating Expenses

Selling and Marketing

We currently sell our products and services using direct sales representatives in North America and in select international markets. Our sales costs primarily consist of salaries, commissions, benefits, incentive compensation and stock-based compensation. Costs also include expenses for travel and other promotional and sales-related activities as well as clinical training costs.

Our marketing costs primarily consist of salaries, benefits, incentive compensation and stock-based compensation. They also include expenses for travel, trade shows, and other promotional and marketing activities, including direct and online marketing. As the business environment improves, we expect sales and marketing expenses to continue to increase, but at a rate slightly below our rate of revenue growth.

General and Administrative

Our general and administrative costs primarily consist of expenses associated with our executive, accounting and finance, information technology, legal, regulatory affairs, quality assurance and human resource departments, direct office rent/facilities costs, and intellectual property portfolio management. These expenses consist of personnel-related expenses (primarily salaries, benefits, incentive compensation and stock-based compensation), audit fees, legal fees, consultants, travel, insurance, and expected credit losses. During the normal course of operations, we may incur expected credit losses on accounts receivable balances that are deemed to be uncollectible.

Research and Development 

Our research and development costs primarily consist of personnel-related costs (primarily salaries, benefits, incentive compensation, and stock-based compensation), material costs, amortization of intangible assets, clinical costs, and facilities costs in our Yokneam, Israel and San Jose, California research centers. Our ongoing research and development activities are primarily focused on improving and enhancing our current technologies, products, and services, and on expanding our current product offering with the introduction of new products and expanded indications.

We expense all research and development costs in the periods in which they are incurred. We expect our research and development expenses to increase in absolute dollars as we continue to invest in research, clinical studies, and development activities, but to decline as a percentage of revenue as our revenue increases over time.

Finance Expenses

Finance expenses consist of interest income, interest expense and other banking charges. Interest income consists of interest earned on our cash, cash equivalents and short-term bank deposits. We expect interest income to vary depending on our average investment balances and market interest rates during each reporting period. Interest expense consists of interest on long-term debt and other borrowings. The interest rates on our long-term debt were 7.7% for the MSLP Loan (now owned by Madryn), 13.5% for the Madryn Notes, and 12.0% for the 2024 Notes as of December 31, 2024 and 8.71% for the MSLP Loan and 14.03% for the Madryn Notes as of December 31, 2023.

Foreign Exchange (Gain) Loss

Foreign currency exchange (gain) loss changes reflect foreign exchange gains or losses related to the change in value of assets and liabilities denominated in currencies other than the U.S. dollar.

Loss on Debt Extinguishment

Loss on Debt Extinguishment is due to the May 2024 exchange of $52.1 million in aggregate principal amount outstanding under the MSLP Loan Agreement for $17.1 million in aggregate principal of New Secured Notes and 576,986 shares of Series Y Convertible Preferred Stock. As part of the May 2024 extinguishment of principal, the Company recognized a $10.9 million non-cash loss. Additionally, in September 2024 the Company exchanged $15.0 million in aggregate principal of New Secured Notes for 203,583 shares of Series Y Convertible Preferred Stock. As part of the September 2024 extinguishment of principal, the Company recognized a $0.5 million non-cash loss.

Income Tax Benefit

We estimate our current and deferred tax liabilities based on current tax laws in the statutory jurisdictions in which we operate. These estimates include judgments about liabilities resulting from temporary differences between assets and liabilities recognized for financial reporting purposes and such amounts recognized for tax purposes. In certain jurisdictions, only the payments invoiced in the current period are subject to tax, but for accounting purposes, the discounted value of the total subscription contract is reported and tax affected. This results in a deferred tax credit which is settled in the future period when the monthly installment payment is issued and settled with the customer. Since our inception, we have not recorded any tax benefits for the net operating losses we have incurred in each year or for the research and development tax credits we generated in the United States. We believe, based upon the weight of available evidence, that it is more likely than not that all of our net operating loss carryforwards and tax credits will not be realized.

Income tax benefit is recognized based on the actual taxable income or loss incurred during the year ended December 31, 2024.

Non-Controlling Interests

We have minority shareholders in one jurisdiction in which we have direct operations. For accounting purposes, these minority partners are referred to as non-controlling interests, and we record the non-controlling interests’ share of earnings in our subsidiaries as a separate balance within stockholders’ equity in the consolidated balance sheets and consolidated statements of stockholders’ equity (deficit).

Results of Operations

The following tables set forth our consolidated results of operations in U.S. dollars and as a percentage of revenues for the years indicated: